diff options
52 files changed, 3696 insertions, 4672 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 093f57af32d3..94eb86319ff3 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -87,8 +87,6 @@ source "drivers/staging/frontier/Kconfig" source "drivers/staging/dream/Kconfig" -source "drivers/staging/dst/Kconfig" - source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/b3dfg/Kconfig" @@ -145,5 +143,7 @@ source "drivers/staging/wavelan/Kconfig" source "drivers/staging/netwave/Kconfig" +source "drivers/staging/sm7xx/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 069864f4391e..b5e67b889f60 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_INPUT_MIMIO) += mimio/ obj-$(CONFIG_TRANZPORT) += frontier/ obj-$(CONFIG_DREAM) += dream/ -obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ @@ -53,3 +52,4 @@ obj-$(CONFIG_ARLAN) += arlan/ obj-$(CONFIG_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/ +obj-$(CONFIG_FB_SM7XX) += sm7xx/ diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig index 7632f5760060..1d74dabf9511 100644 --- a/drivers/staging/batman-adv/Kconfig +++ b/drivers/staging/batman-adv/Kconfig @@ -4,6 +4,7 @@ config BATMAN_ADV tristate "B.A.T.M.A.N. Advanced Meshing Protocol" + depends on PROC_FS && PACKET default n ---help--- diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index d724798278d6..eb617508cca4 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -363,8 +363,10 @@ void add_bcast_packet_to_list(unsigned char *packet_buff, int packet_len) return; forw_packet->packet_buff = kmalloc(packet_len, GFP_ATOMIC); - if (!forw_packet->packet_buff) + if (!forw_packet->packet_buff) { + kfree(forw_packet); return; + } forw_packet->packet_len = packet_len; memcpy(forw_packet->packet_buff, packet_buff, forw_packet->packet_len); diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index ccc5cdc008c6..b559a9c2f857 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -451,7 +451,7 @@ #define COMEDI_CB_EOS 1 /* end of scan */ #define COMEDI_CB_EOA 2 /* end of acquisition */ -#define COMEDI_CB_BLOCK 4 /* DEPRECATED: convenient block size */ +#define COMEDI_CB_BLOCK 4 /* data has arrived: wakes up read() / write() */ #define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ #define COMEDI_CB_ERROR 16 /* card error during acquisition */ #define COMEDI_CB_OVERFLOW 32 /* buffer overflow/underflow */ diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 0d2c2eb23b23..bd397840dcba 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -849,8 +849,11 @@ static int jr3_pci_attach(struct comedi_device *dev, } devpriv->pci_enabled = 1; - devpriv->iobase = - ioremap(pci_resource_start(card, 0), sizeof(struct jr3_t)); + devpriv->iobase = ioremap(pci_resource_start(card, 0), + offsetof(struct jr3_t, channel[devpriv->n_channels])); + if (!devpriv->iobase) + return -ENOMEM; + result = alloc_subdevices(dev, devpriv->n_channels); if (result < 0) goto out; diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 06c020466298..9a1b559c4b0d 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v2.3" +#define DRIVER_VERSION "v2.4" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* @@ -81,6 +81,8 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 2.1: changed PWM API * 2.2: added firmware kernel request to fix an udev problem * 2.3: corrected a bug in bulk timeouts which were far too short + * 2.4: fixed a bug which causes the driver to hang when it ran out of data. + * Thanks to Jan-Matthias Braun and Ian to spot the bug and fix it. * */ @@ -532,6 +534,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb) } } /* tell comedi that data is there */ + s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; comedi_event(this_usbduxsub->comedidev, s); } diff --git a/drivers/staging/dst/Kconfig b/drivers/staging/dst/Kconfig deleted file mode 100644 index 448d342ac2a2..000000000000 --- a/drivers/staging/dst/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -config DST - tristate "Distributed storage" - depends on NET && CRYPTO && SYSFS && BLK_DEV - select CONNECTOR - ---help--- - DST is a network block device storage, which can be used to organize - exported storage on the remote nodes into the local block device. - - DST works on top of any network media and protocol; it is just a matter - of configuration utility to understand the correct addresses. The most - common example is TCP over IP, which allows to pass through firewalls and - create remote backup storage in a different datacenter. DST requires - single port to be enabled on the exporting node and outgoing connections - on the local node. - - DST works with in-kernel client and server, which improves performance by - eliminating unneded data copies and by not depending on the version - of the external IO components. It requires userspace configuration utility - though. - - DST uses transaction model, when each store has to be explicitly acked - from the remote node to be considered as successfully written. There - may be lots of in-flight transactions. When remote host does not ack - the transaction it will be resent predefined number of times with specified - timeouts between them. All those parameters are configurable. Transactions - are marked as failed after all resends complete unsuccessfully; having - long enough resend timeout and/or large number of resends allows not to - return error to the higher (FS usually) layer in case of short network - problems or remote node outages. In case of network RAID setup this means - that storage will not degrade until transactions are marked as failed, and - thus will not force checksum recalculation and data rebuild. In case of - connection failure DST will try to reconnect to the remote node automatically. - DST sends ping commands at idle time to detect if remote node is alive. - - Because of transactional model it is possible to use zero-copy sending - without worry of data corruption (which in turn could be detected by the - strong checksums though). - - DST may fully encrypt the data channel in case of untrusted channel and implement - strong checksum of the transferred data. It is possible to configure algorithms - and crypto keys; they should match on both sides of the network channel. - Crypto processing does not introduce noticeble performance overhead, since DST - uses configurable pool of threads to perform crypto processing. - - DST utilizes memory pool model of all its transaction allocations (it is the - only additional allocation on the client) and server allocations (bio pools, - while pages are allocated from the slab). - - At startup DST performs a simple negotiation with the export node to determine - access permissions and size of the exported storage. It can be extended if - new parameters should be autonegotiated. - - DST carries block IO flags in the protocol, which allows to transparently implement - barriers and sync/flush operations. Those flags are used in the export node where - IO against the local storage is performed, which means that sync write will be sync - on the remote node too, which in turn improves data integrity and improved resistance - to errors and data corruption during power outages or storage damages. - - Homepage: http://www.ioremap.net/projects/dst - Userspace configuration utility and the latest releases: http://www.ioremap.net/archive/dst/ - -config DST_DEBUG - bool "DST debug" - depends on DST - ---help--- - This option will enable HEAVY debugging of the DST. - Turn it on ONLY if you have to debug some really obscure problem. diff --git a/drivers/staging/dst/Makefile b/drivers/staging/dst/Makefile deleted file mode 100644 index 3a8b0cf9643e..000000000000 --- a/drivers/staging/dst/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DST) += nst.o - -nst-y := dcore.o state.o export.o thread_pool.o crypto.o trans.o diff --git a/drivers/staging/dst/crypto.c b/drivers/staging/dst/crypto.c deleted file mode 100644 index 351295c97a4b..000000000000 --- a/drivers/staging/dst/crypto.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bio.h> -#include <linux/crypto.h> -#include <linux/dst.h> -#include <linux/kernel.h> -#include <linux/scatterlist.h> -#include <linux/slab.h> - -/* - * Tricky bastard, but IV can be more complex with time... - */ -static inline u64 dst_gen_iv(struct dst_trans *t) -{ - return t->gen; -} - -/* - * Crypto machinery: hash/cipher support for the given crypto controls. - */ -static struct crypto_hash *dst_init_hash(struct dst_crypto_ctl *ctl, u8 *key) -{ - int err; - struct crypto_hash *hash; - - hash = crypto_alloc_hash(ctl->hash_algo, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hash)) { - err = PTR_ERR(hash); - dprintk("%s: failed to allocate hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_exit; - } - - ctl->crypto_attached_size = crypto_hash_digestsize(hash); - - if (!ctl->hash_keysize) - return hash; - - err = crypto_hash_setkey(hash, key, ctl->hash_keysize); - if (err) { - dprintk("%s: failed to set key for hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_free; - } - - return hash; - -err_out_free: - crypto_free_hash(hash); -err_out_exit: - return ERR_PTR(err); -} - -static struct crypto_ablkcipher *dst_init_cipher(struct dst_crypto_ctl *ctl, - u8 *key) -{ - int err = -EINVAL; - struct crypto_ablkcipher *cipher; - - if (!ctl->cipher_keysize) - goto err_out_exit; - - cipher = crypto_alloc_ablkcipher(ctl->cipher_algo, 0, 0); - if (IS_ERR(cipher)) { - err = PTR_ERR(cipher); - dprintk("%s: failed to allocate cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_exit; - } - - crypto_ablkcipher_clear_flags(cipher, ~0); - - err = crypto_ablkcipher_setkey(cipher, key, ctl->cipher_keysize); - if (err) { - dprintk("%s: failed to set key for cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_free; - } - - return cipher; - -err_out_free: - crypto_free_ablkcipher(cipher); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Crypto engine has a pool of pages to encrypt data into before sending - * it over the network. This pool is freed/allocated here. - */ -static void dst_crypto_pages_free(struct dst_crypto_engine *e) -{ - unsigned int i; - - for (i = 0; i < e->page_num; ++i) - __free_page(e->pages[i]); - kfree(e->pages); -} - -static int dst_crypto_pages_alloc(struct dst_crypto_engine *e, int num) -{ - int i; - - e->pages = kmalloc(num * sizeof(struct page **), GFP_KERNEL); - if (!e->pages) - return -ENOMEM; - - for (i = 0; i < num; ++i) { - e->pages[i] = alloc_page(GFP_KERNEL); - if (!e->pages[i]) - goto err_out_free_pages; - } - - e->page_num = num; - return 0; - -err_out_free_pages: - while (--i >= 0) - __free_page(e->pages[i]); - - kfree(e->pages); - return -ENOMEM; -} - -/* - * Initialize crypto engine for given node. - * Setup cipher/hash, keys, pool of threads and private data. - */ -static int dst_crypto_engine_init(struct dst_crypto_engine *e, - struct dst_node *n) -{ - int err; - struct dst_crypto_ctl *ctl = &n->crypto; - - err = dst_crypto_pages_alloc(e, n->max_pages); - if (err) - goto err_out_exit; - - e->size = PAGE_SIZE; - e->data = kmalloc(e->size, GFP_KERNEL); - if (!e->data) { - err = -ENOMEM; - goto err_out_free_pages; - } - - if (ctl->hash_algo[0]) { - e->hash = dst_init_hash(ctl, n->hash_key); - if (IS_ERR(e->hash)) { - err = PTR_ERR(e->hash); - e->hash = NULL; - goto err_out_free; - } - } - - if (ctl->cipher_algo[0]) { - e->cipher = dst_init_cipher(ctl, n->cipher_key); - if (IS_ERR(e->cipher)) { - err = PTR_ERR(e->cipher); - e->cipher = NULL; - goto err_out_free_hash; - } - } - - return 0; - -err_out_free_hash: - crypto_free_hash(e->hash); -err_out_free: - kfree(e->data); -err_out_free_pages: - dst_crypto_pages_free(e); -err_out_exit: - return err; -} - -static void dst_crypto_engine_exit(struct dst_crypto_engine *e) -{ - if (e->hash) - crypto_free_hash(e->hash); - if (e->cipher) - crypto_free_ablkcipher(e->cipher); - dst_crypto_pages_free(e); - kfree(e->data); -} - -/* - * Waiting for cipher processing to be completed. - */ -struct dst_crypto_completion { - struct completion complete; - int error; -}; - -static void dst_crypto_complete(struct crypto_async_request *req, int err) -{ - struct dst_crypto_completion *c = req->data; - - if (err == -EINPROGRESS) - return; - - dprintk("%s: req: %p, err: %d.\n", __func__, req, err); - c->error = err; - complete(&c->complete); -} - -static int dst_crypto_process(struct ablkcipher_request *req, - struct scatterlist *sg_dst, struct scatterlist *sg_src, - void *iv, int enc, unsigned long timeout) -{ - struct dst_crypto_completion c; - int err; - - init_completion(&c.complete); - c.error = -EINPROGRESS; - - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - dst_crypto_complete, &c); - - ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv); - - if (enc) - err = crypto_ablkcipher_encrypt(req); - else - err = crypto_ablkcipher_decrypt(req); - - switch (err) { - case -EINPROGRESS: - case -EBUSY: - err = wait_for_completion_interruptible_timeout(&c.complete, - timeout); - if (!err) - err = -ETIMEDOUT; - else - err = c.error; - break; - default: - break; - } - - return err; -} - -/* - * DST uses generic iteration approach for data crypto processing. - * Single block IO request is switched into array of scatterlists, - * which are submitted to the crypto processing iterator. - * - * Input and output iterator initialization are different, since - * in output case we can not encrypt data in-place and need a - * temporary storage, which is then being sent to the remote peer. - */ -static int dst_trans_iter_out(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], e->pages[i], bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_trans_iter_in(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], bv->bv_page, bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_crypt_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - struct ablkcipher_request *req = e->data; - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - - memcpy(iv, &e->iv, sizeof(e->iv)); - - return dst_crypto_process(req, sg_dst, sg_src, iv, e->enc, e->timeout); -} - -static int dst_crypt(struct dst_crypto_engine *e, struct bio *bio) -{ - struct ablkcipher_request *req = e->data; - - memset(req, 0, sizeof(struct ablkcipher_request)); - ablkcipher_request_set_tfm(req, e->cipher); - - if (e->enc) - return dst_trans_iter_out(bio, e, dst_crypt_iterator); - else - return dst_trans_iter_in(bio, e, dst_crypt_iterator); -} - -static int dst_hash_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - return crypto_hash_update(e->data, sg_src, sg_src->length); -} - -static int dst_hash(struct dst_crypto_engine *e, struct bio *bio, void *dst) -{ - struct hash_desc *desc = e->data; - int err; - - desc->tfm = e->hash; - desc->flags = 0; - - err = crypto_hash_init(desc); - if (err) - return err; - - err = dst_trans_iter_in(bio, e, dst_hash_iterator); - if (err) - return err; - - err = crypto_hash_final(desc, dst); - if (err) - return err; - - return 0; -} - -/* - * Initialize/cleanup a crypto thread. The only thing it should - * do is to allocate a pool of pages as temporary storage. - * And to setup cipher and/or hash. - */ -static void *dst_crypto_thread_init(void *data) -{ - struct dst_node *n = data; - struct dst_crypto_engine *e; - int err = -ENOMEM; - - e = kzalloc(sizeof(struct dst_crypto_engine), GFP_KERNEL); - if (!e) - goto err_out_exit; - e->src = kcalloc(2 * n->max_pages, sizeof(struct scatterlist), - GFP_KERNEL); - if (!e->src) - goto err_out_free; - - e->dst = e->src + n->max_pages; - - err = dst_crypto_engine_init(e, n); - if (err) - goto err_out_free_all; - - return e; - -err_out_free_all: - kfree(e->src); -err_out_free: - kfree(e); -err_out_exit: - return ERR_PTR(err); -} - -static void dst_crypto_thread_cleanup(void *private) -{ - struct dst_crypto_engine *e = private; - - dst_crypto_engine_exit(e); - kfree(e->src); - kfree(e); -} - -/* - * Initialize crypto engine for given node: store keys, create pool - * of threads, initialize each one. - * - * Each thread has unique ID, but 0 and 1 are reserved for receiving and - * accepting threads (if export node), so IDs could start from 2, but starting - * them from 10 allows easily understand what this thread is for. - */ -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl) -{ - void *key = (ctl + 1); - int err = -ENOMEM, i; - char name[32]; - - if (ctl->hash_keysize) { - n->hash_key = kmalloc(ctl->hash_keysize, GFP_KERNEL); - if (!n->hash_key) - goto err_out_exit; - memcpy(n->hash_key, key, ctl->hash_keysize); - } - - if (ctl->cipher_keysize) { - n->cipher_key = kmalloc(ctl->cipher_keysize, GFP_KERNEL); - if (!n->cipher_key) - goto err_out_free_hash; - memcpy(n->cipher_key, key, ctl->cipher_keysize); - } - memcpy(&n->crypto, ctl, sizeof(struct dst_crypto_ctl)); - - for (i = 0; i < ctl->thread_num; ++i) { - snprintf(name, sizeof(name), "%s-crypto-%d", n->name, i); - /* Unique ids... */ - err = thread_pool_add_worker(n->pool, name, i + 10, - dst_crypto_thread_init, dst_crypto_thread_cleanup, n); - if (err) - goto err_out_free_threads; - } - - return 0; - -err_out_free_threads: - while (--i >= 0) - thread_pool_del_worker_id(n->pool, i+10); - - if (ctl->cipher_keysize) - kfree(n->cipher_key); - ctl->cipher_keysize = 0; -err_out_free_hash: - if (ctl->hash_keysize) - kfree(n->hash_key); - ctl->hash_keysize = 0; -err_out_exit: - return err; -} - -void dst_node_crypto_exit(struct dst_node *n) -{ - struct dst_crypto_ctl *ctl = &n->crypto; - - if (ctl->cipher_algo[0] || ctl->hash_algo[0]) { - kfree(n->hash_key); - kfree(n->cipher_key); - } -} - -/* - * Thrad pool setup callback. Just stores a transaction in private data. - */ -static int dst_trans_crypto_setup(void *crypto_engine, void *trans) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = trans; - return 0; -} - -#if 0 -static void dst_dump_bio(struct bio *bio) -{ - u8 *p; - struct bio_vec *bv; - int i; - - bio_for_each_segment(bv, bio, i) { - dprintk("%s: %llu/%u: size: %u, offset: %u, data: ", - __func__, bio->bi_sector, bio->bi_size, - bv->bv_len, bv->bv_offset); - - p = kmap(bv->bv_page) + bv->bv_offset; - for (i = 0; i < bv->bv_len; ++i) - printk(KERN_DEBUG "%02x ", p[i]); - kunmap(bv->bv_page); - printk("\n"); - } -} -#endif - -/* - * Encrypt/hash data and send it to the network. - */ -static int dst_crypto_process_sending(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash) -{ - int e |