diff options
| -rw-r--r-- | sound/soc/Kconfig | 3 | ||||
| -rw-r--r-- | sound/soc/Makefile | 3 | ||||
| -rw-r--r-- | sound/soc/davinci/Kconfig | 106 | ||||
| -rw-r--r-- | sound/soc/davinci/Makefile | 16 | ||||
| -rw-r--r-- | sound/soc/omap/Kconfig | 120 | ||||
| -rw-r--r-- | sound/soc/omap/Makefile | 30 | ||||
| -rw-r--r-- | sound/soc/ti/Kconfig | 368 | ||||
| -rw-r--r-- | sound/soc/ti/Makefile | 44 | ||||
| -rw-r--r-- | sound/soc/ti/ams-delta.c (renamed from sound/soc/omap/ams-delta.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-evm.c (renamed from sound/soc/davinci/davinci-evm.c) | 4 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-i2s.c (renamed from sound/soc/davinci/davinci-i2s.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-i2s.h (renamed from sound/soc/davinci/davinci-i2s.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-mcasp.c (renamed from sound/soc/davinci/davinci-mcasp.c) | 14 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-mcasp.h (renamed from sound/soc/davinci/davinci-mcasp.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/davinci-vcif.c (renamed from sound/soc/davinci/davinci-vcif.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/edma-pcm.c (renamed from sound/soc/davinci/edma-pcm.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/edma-pcm.h (renamed from sound/soc/davinci/edma-pcm.h) | 4 | ||||
| -rw-r--r-- | sound/soc/ti/n810.c (renamed from sound/soc/omap/n810.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-abe-twl6040.c (renamed from sound/soc/omap/omap-abe-twl6040.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-dmic.c (renamed from sound/soc/omap/omap-dmic.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-dmic.h (renamed from sound/soc/omap/omap-dmic.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-hdmi.c (renamed from sound/soc/omap/omap-hdmi-audio.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcbsp-priv.h (renamed from sound/soc/omap/omap-mcbsp-priv.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcbsp-st.c (renamed from sound/soc/omap/omap-mcbsp-st.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcbsp.c (renamed from sound/soc/omap/omap-mcbsp.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcbsp.h (renamed from sound/soc/omap/omap-mcbsp.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcpdm.c (renamed from sound/soc/omap/omap-mcpdm.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-mcpdm.h (renamed from sound/soc/omap/omap-mcpdm.h) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap-twl4030.c (renamed from sound/soc/omap/omap-twl4030.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/omap3pandora.c (renamed from sound/soc/omap/omap3pandora.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/osk5912.c (renamed from sound/soc/omap/osk5912.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/rx51.c (renamed from sound/soc/omap/rx51.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/sdma-pcm.c (renamed from sound/soc/omap/sdma-pcm.c) | 0 | ||||
| -rw-r--r-- | sound/soc/ti/sdma-pcm.h (renamed from sound/soc/omap/sdma-pcm.h) | 4 |
34 files changed, 427 insertions, 289 deletions
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index d21659f5a7e2..6592a422a047 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -46,13 +46,11 @@ source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/bcm/Kconfig" source "sound/soc/cirrus/Kconfig" -source "sound/soc/davinci/Kconfig" source "sound/soc/dwc/Kconfig" source "sound/soc/fsl/Kconfig" source "sound/soc/hisilicon/Kconfig" source "sound/soc/jz4740/Kconfig" source "sound/soc/nuc900/Kconfig" -source "sound/soc/omap/Kconfig" source "sound/soc/kirkwood/Kconfig" source "sound/soc/img/Kconfig" source "sound/soc/intel/Kconfig" @@ -70,6 +68,7 @@ source "sound/soc/sti/Kconfig" source "sound/soc/stm/Kconfig" source "sound/soc/sunxi/Kconfig" source "sound/soc/tegra/Kconfig" +source "sound/soc/ti/Kconfig" source "sound/soc/txx9/Kconfig" source "sound/soc/uniphier/Kconfig" source "sound/soc/ux500/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index aff7b1989436..48c48c1c893c 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_SND_SOC) += atmel/ obj-$(CONFIG_SND_SOC) += au1x/ obj-$(CONFIG_SND_SOC) += bcm/ obj-$(CONFIG_SND_SOC) += cirrus/ -obj-$(CONFIG_SND_SOC) += davinci/ obj-$(CONFIG_SND_SOC) += dwc/ obj-$(CONFIG_SND_SOC) += fsl/ obj-$(CONFIG_SND_SOC) += hisilicon/ @@ -41,7 +40,6 @@ obj-$(CONFIG_SND_SOC) += mediatek/ obj-$(CONFIG_SND_SOC) += meson/ obj-$(CONFIG_SND_SOC) += mxs/ obj-$(CONFIG_SND_SOC) += nuc900/ -obj-$(CONFIG_SND_SOC) += omap/ obj-$(CONFIG_SND_SOC) += kirkwood/ obj-$(CONFIG_SND_SOC) += pxa/ obj-$(CONFIG_SND_SOC) += qcom/ @@ -54,6 +52,7 @@ obj-$(CONFIG_SND_SOC) += sti/ obj-$(CONFIG_SND_SOC) += stm/ obj-$(CONFIG_SND_SOC) += sunxi/ obj-$(CONFIG_SND_SOC) += tegra/ +obj-$(CONFIG_SND_SOC) += ti/ obj-$(CONFIG_SND_SOC) += txx9/ obj-$(CONFIG_SND_SOC) += uniphier/ obj-$(CONFIG_SND_SOC) += ux500/ diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig deleted file mode 100644 index 778faff28e0e..000000000000 --- a/sound/soc/davinci/Kconfig +++ /dev/null @@ -1,106 +0,0 @@ -config SND_DAVINCI_SOC - tristate - depends on ARCH_DAVINCI - select SND_EDMA_SOC - -config SND_EDMA_SOC - tristate "SoC Audio for Texas Instruments chips using eDMA" - depends on TI_EDMA - select SND_SOC_GENERIC_DMAENGINE_PCM - help - Say Y or M here if you want audio support for TI SoC which uses eDMA. - The following line of SoCs are supported by this platform driver: - - daVinci devices - - AM335x - - AM437x/AM438x - - DRA7xx family - -config SND_DAVINCI_SOC_I2S - tristate "DaVinci Multichannel Buffered Serial Port (McBSP) support" - depends on SND_EDMA_SOC - help - Say Y or M here if you want to have support for McBSP IP found in - Texas Instruments DaVinci DA850 SoCs. - -config SND_DAVINCI_SOC_MCASP - tristate "Multichannel Audio Serial Port (McASP) support" - depends on SND_SDMA_SOC || SND_EDMA_SOC - help - Say Y or M here if you want to have support for McASP IP found in - various Texas Instruments SoCs like: - - daVinci devices - - Sitara line of SoCs (AM335x, AM438x, etc) - - DRA7x devices - -config SND_DAVINCI_SOC_VCIF - tristate - -config SND_DAVINCI_SOC_GENERIC_EVM - tristate - select SND_SOC_TLV320AIC3X - select SND_DAVINCI_SOC_MCASP - -config SND_AM33XX_SOC_EVM - tristate "SoC Audio for the AM33XX chip based boards" - depends on SND_EDMA_SOC && SOC_AM33XX && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y or M if you want to add support for SoC audio on AM33XX - boards using McASP and TLV320AIC3X codec. For example AM335X-EVM, - AM335X-EVMSK, and BeagelBone with AudioCape boards have this - setup. - -config SND_DAVINCI_SOC_EVM - tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" - depends on SND_EDMA_SOC && I2C - depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y if you want to add support for SoC audio on TI - DaVinci DM6446, DM355 or DM365 EVM platforms. - -choice - prompt "DM365 codec select" - depends on SND_DAVINCI_SOC_EVM - depends on MACH_DAVINCI_DM365_EVM - -config SND_DM365_AIC3X_CODEC - tristate "Audio Codec - AIC3101" - help - Say Y if you want to add support for AIC3101 audio codec - -config SND_DM365_VOICE_CODEC - tristate "Voice Codec - CQ93VC" - select MFD_DAVINCI_VOICECODEC - select SND_DAVINCI_SOC_VCIF - select SND_SOC_CQ0093VC - help - Say Y if you want to add support for SoC On-chip voice codec -endchoice - -config SND_DM6467_SOC_EVM - tristate "SoC Audio support for DaVinci DM6467 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DM6467_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - select SND_SOC_SPDIF - - help - Say Y if you want to add support for SoC audio on TI - -config SND_DA830_SOC_EVM - tristate "SoC Audio support for DA830/OMAP-L137 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DA830_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - - help - Say Y if you want to add support for SoC audio on TI - DA830/OMAP-L137 EVM - -config SND_DA850_SOC_EVM - tristate "SoC Audio support for DA850/OMAP-L138 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DA850_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y if you want to add support for SoC audio on TI - DA850/OMAP-L138 EVM - diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile deleted file mode 100644 index 23c6592eb31a..000000000000 --- a/sound/soc/davinci/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# DAVINCI Platform Support -snd-soc-edma-objs := edma-pcm.o -snd-soc-davinci-i2s-objs := davinci-i2s.o -snd-soc-davinci-mcasp-objs:= davinci-mcasp.o -snd-soc-davinci-vcif-objs:= davinci-vcif.o - -obj-$(CONFIG_SND_EDMA_SOC) += snd-soc-edma.o -obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o -obj-$(CONFIG_SND_DAVINCI_SOC_MCASP) += snd-soc-davinci-mcasp.o -obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o - -# Generic DAVINCI/AM33xx Machine Support -snd-soc-evm-objs := davinci-evm.o - -obj-$(CONFIG_SND_DAVINCI_SOC_GENERIC_EVM) += snd-soc-evm.o diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig deleted file mode 100644 index 3d418482d242..000000000000 --- a/sound/soc/omap/Kconfig +++ /dev/null @@ -1,120 +0,0 @@ -config SND_OMAP_SOC - tristate "SoC Audio for Texas Instruments OMAP chips (deprecated)" - depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST) - select SND_SDMA_SOC - -config SND_SDMA_SOC - tristate "SoC Audio for Texas Instruments chips using sDMA" - depends on DMA_OMAP || COMPILE_TEST - select SND_SOC_GENERIC_DMAENGINE_PCM - -config SND_OMAP_SOC_DMIC - tristate - -config SND_OMAP_SOC_MCBSP - tristate - -config SND_OMAP_SOC_MCPDM - tristate - -config SND_OMAP_SOC_HDMI_AUDIO - tristate "HDMI audio support for OMAP4+ based SoCs" - depends on SND_SDMA_SOC - help - For HDMI audio to work OMAPDSS HDMI support should be - enabled. - The hdmi audio driver implements cpu-dai component using the - callbacks provided by OMAPDSS and registers the component - under DSS HDMI device. Omap-pcm is registered for platform - component also under DSS HDMI device. Dummy codec is used as - as codec component. The hdmi audio driver implements also - the card and registers it under its own platform device. - The device for the driver is registered by OMAPDSS hdmi - driver. - -config SND_OMAP_SOC_N810 - tristate "SoC Audio support for Nokia N810" - depends on SND_SDMA_SOC && MACH_NOKIA_N810 && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC3X - help - Say Y if you want to add support for SoC audio on Nokia N810. - -config SND_OMAP_SOC_RX51 - tristate "SoC Audio support for Nokia N900 (RX-51)" - depends on SND_SDMA_SOC && ARM && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC3X - select SND_SOC_TPA6130A2 - depends on GPIOLIB - help - Say Y if you want to add support for SoC audio on Nokia N900 - cellphone. - -config SND_OMAP_SOC_AMS_DELTA - tristate "SoC Audio support for Amstrad E3 (Delta) videophone" - depends on SND_SDMA_SOC && MACH_AMS_DELTA && TTY - select SND_OMAP_SOC_MCBSP - select SND_SOC_CX20442 - help - Say Y if you want to add support for SoC audio device connected to - a handset and a speakerphone found on Amstrad E3 (Delta) videophone. - - Note that in order to get those devices fully supported, you have to - build the kernel with standard serial port driver included and - configured for at least 4 ports. Then, from userspace, you must load - a line discipline #19 on the modem (ttyS3) serial line. The simplest - way to achieve this is to install util-linux-ng and use the included - ldattach utility. This can be started automatically from udev, - a simple rule like this one should do the trick (it does for me): - ACTION=="add", KERNEL=="controlC0", \ - RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" - -config SND_OMAP_SOC_OSK5912 - tristate "SoC Audio support for omap osk5912" - depends on SND_SDMA_SOC && MACH_OMAP_OSK && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC23_I2C - help - Say Y if you want to add support for SoC audio on osk5912. - -config SND_OMAP_SOC_OMAP_TWL4030 - tristate "SoC Audio support for TI SoC based boards with twl4030 codec" - depends on TWL4030_CORE && SND_SDMA_SOC - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on TI SoC based boards - using twl4030 as c codec. This driver currently supports: - - Beagleboard or Devkit8000 - - Gumstix Overo or CompuLab CM-T35/CM-T3730 - - IGEP v2 - - OMAP3EVM - - SDP3430 - - Zoom2 - -config SND_OMAP_SOC_OMAP_ABE_TWL6040 - tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" - depends on TWL6040_CORE && SND_SDMA_SOC && COMMON_CLK - depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST - select SND_OMAP_SOC_DMIC - select SND_OMAP_SOC_MCPDM - select SND_SOC_TWL6040 - select SND_SOC_DMIC - select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS) - select CLK_TWL6040 - help - Say Y if you want to add support for SoC audio on OMAP boards using - ABE and twl6040 codec. This driver currently supports: - - SDP4430/Blaze boards - - PandaBoard (4430) - - PandaBoardES (4460) - - omap5-uevm (5432) - -config SND_OMAP_SOC_OMAP3_PANDORA - tristate "SoC Audio support for OMAP3 Pandora" - depends on TWL4030_CORE && SND_SDMA_SOC && MACH_OMAP3_PANDORA - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the OMAP3 Pandora. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile deleted file mode 100644 index d005338dd13c..000000000000 --- a/sound/soc/omap/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# OMAP Platform Support -snd-soc-sdma-objs := sdma-pcm.o -snd-soc-omap-dmic-objs := omap-dmic.o -snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o -snd-soc-omap-mcpdm-objs := omap-mcpdm.o -snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o - -obj-$(CONFIG_SND_SDMA_SOC) += snd-soc-sdma.o -obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o -obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o -obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o -obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o - -# OMAP Machine Support -snd-soc-n810-objs := n810.o -snd-soc-rx51-objs := rx51.o -snd-soc-ams-delta-objs := ams-delta.o -snd-soc-osk5912-objs := osk5912.o -snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o -snd-soc-omap-twl4030-objs := omap-twl4030.o -snd-soc-omap3pandora-objs := omap3pandora.o - -obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o -obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o -obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o -obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig new file mode 100644 index 000000000000..698810c770f0 --- /dev/null +++ b/sound/soc/ti/Kconfig @@ -0,0 +1,368 @@ +menu "Audio support for Texas Instruments SoCs" +depends on DMA_OMAP || TI_EDMA || COMPILE_TEST + +config SND_SOC_TI_EDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_TI_SDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +comment "Texas Instruments DAI support for:" +config SND_SOC_DAVINCI_ASP + tristate "daVinci Audio Serial Port (ASP) or McBSP suport" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci ASP or McBSP. + The driver only implements the ASP support which is a subset of + daVinci McBSP (w/o the multichannel support). + +config SND_SOC_DAVINCI_MCASP + tristate "Multichannel Audio Serial Port (McASP) support" + select SND_SOC_TI_EDMA_PCM if TI_EDMA + select SND_SOC_TI_SDMA_PCM if DMA_OMAP + help + Say Y or M here if you want to have support for McASP IP found in + various Texas Instruments SoCs like: + - daVinci devices + - Sitara line of SoCs (AM335x, AM438x, etc) + - DRA7x devices + - Keystone devices + +config SND_SOC_DAVINCI_VCIF + tristate "daVinci Voice Interface (VCIF) suport" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci VCIF. + +config SND_SOC_OMAP_DMIC + tristate "Digital Microphone Module (DMIC) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for DMIC IP found in + OMAP4 and OMAP5. + +config SND_OMAP_SOC_MCBSP + tristate + +config SND_SOC_OMAP_MCBSP + tristate "Multichannel Buffered Serial Port (McBSP) support" + depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + select SND_OMAP_SOC_MCBSP + help + Say Y or M here if you want to have support for McBSP IP found in + Texas Instruments OMAP1/2/3/4/5 SoCs. + +config SND_SOC_OMAP_MCPDM + tristate "Multichannel PDM Controller (McPDM) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for McPDM IP found in + OMAP4 and OMAP5. + +comment "Audio support for boards with Texas Instruments SoCs" +config SND_SOC_NOKIA_N810 + tristate "SoC Audio support for Nokia N810" + depends on MACH_NOKIA_N810 && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y or M if you want to add support for SoC audio on Nokia N810. + +config SND_SOC_NOKIA_RX51 + tristate "SoC Audio support for Nokia RX-51" + depends on ARCH_OMAP3 && I2C && GPIOLIB + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for SoC audio on Nokia RX-51 + hardware. This is also known as Nokia N900 product. + +config SND_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on ARCH_OMAP3 + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. + +config SND_SOC_OMAP3_TWL4030 + tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" + depends on ARCH_OMAP3 || COMPILE_TEST + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on OMAP3 based + boards using twl4030 as codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && COMMON_CLK + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_SOC_OMAP_DMIC + select SND_SOC_OMAP_MCPDM + select SND_SOC_TWL6040 + help + Say Y or M if you want to add support for SoC audio on OMAP boards + using ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - OMAP5 uEVM + +config SND_SOC_OMAP_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on MACH_AMS_DELTA && TTY + select SND_SOC_OMAP_MCBSP + select SND_SOC_CX20442 + help + Say Y or M if you want to add support for SoC audio device + connected to a handset and a speakerphone found on Amstrad E3 (Delta) + videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_SOC_OMAP_HDMI + tristate "OMAP4/5 HDMI audio support" + depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the driver is registered by OMAPDSS hdmi + driver. + +config SND_SOC_OMAP_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on MACH_OMAP_OSK && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC23_I2C + help + Say Y or M if you want to add support for SoC audio on osk5912. + +config SND_SOC_DAVINCI_EVM + tristate "SoC Audio support for DaVinci EVMs" + depends on ARCH_DAVINCI && I2C + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM + select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC + select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM + select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on the following TI + DaVinci EVM platforms: + - DM355 + - DM365 + - DM6446 + - DM6447 + - DM830 + - DM850 + +choice + prompt "DM365 codec select" + depends on SND_SOC_DAVINCI_EVM + depends on MACH_DAVINCI_DM365_EVM + +config SND_SOC_DM365_AIC3X_CODEC + bool "Audio Codec - AIC3101" + help + Say Y if you want to add support for AIC3101 audio codec + +config SND_SOC_DM365_VOICE_CODEC + bool "Voice Codec - CQ93VC" + select MFD_DAVINCI_VOICECODEC + select SND_SOC_CQ0093VC + help + Say Y if you want to add support for SoC On-chip voice codec +endchoice + +menu "Deprecated kconfig options:" + +config SND_AM33XX_SOC_EVM + tristate "SoC Audio for the AM33XX chip based boards" + depends on SOC_AM33XX && I2C + select SND_SOC_TLV320AIC3X + select SND_SOC_DAVINCI_MCASP + help + Say Y or M if you want to add support for SoC audio on AM33XX + boards using McASP and TLV320AIC3X codec. For example AM335X-EVM, + AM335X-EVMSK, and BeagelBone with AudioCape boards have this + setup. + +config SND_DAVINCI_SOC_EVM + tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" + depends on ARCH_DAVINCI && I2C + depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM + select SND_SOC_DAVINCI_EVM + help + Say Y if you want to add support for SoC audio on TI + DaVinci DM6446, DM355 or DM365 EVM platforms. + +choice + prompt "DM365 codec select" + depends on SND_DAVINCI_SOC_EVM + depends on MACH_DAVINCI_DM365_EVM + +config SND_DM365_AIC3X_CODEC + tristate "Audio Codec - AIC3101" + select SND_SOC_DM365_AIC3X_CODEC + help + Say Y if you want to add support for AIC3101 audio codec + +config SND_DM365_VOICE_CODEC + tristate "Voice Codec - CQ93VC" + select SND_SOC_DM365_VOICE_CODEC + help + Say Y if you want to add support for SoC On-chip voice codec +endchoice + +config SND_DM6467_SOC_EVM + tristate "SoC Audio support for DaVinci DM6467 EVM" + depends on MACH_DAVINCI_DM6467_EVM && I2C + select SND_SOC_DAVINCI_EVM + + help + Say Y if you want to add support for SoC audio on TI + +config SND_DA830_SOC_EVM + tristate "SoC Audio support for DA830/OMAP-L137 EVM" + depends on MACH_DAVINCI_DA830_EVM && I2C + select SND_SOC_DAVINCI_EVM + + help + Say Y if you want to add support for SoC audio on TI + DA830/OMAP-L137 EVM + +config SND_DA850_SOC_EVM + tristate "SoC Audio support for DA850/OMAP-L138 EVM" + depends on MACH_DAVINCI_DA850_EVM && I2C + select SND_SOC_DAVINCI_EVM + help + Say Y if you want to add support for SoC audio on TI + DA850/OMAP-L138 EVM + +config SND_OMAP_SOC_HDMI_AUDIO + tristate "HDMI audio support for OMAP4+ based SoCs" + select SND_SOC_OMAP_HDMI + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the driver is registered by OMAPDSS hdmi + driver. + +config SND_OMAP_SOC_N810 + tristate "SoC Audio support for Nokia N810" + depends on MACH_NOKIA_N810 && I2C + select SND_SOC_NOKIA_N810 + help + Say Y if you want to add support for SoC audio on Nokia N810. + +config SND_OMAP_SOC_RX51 + tristate "SoC Audio support for Nokia N900 (RX-51)" + depends on ARM && I2C && GPIOLIB && ARCH_OMAP3 + select SND_SOC_NOKIA_RX51 + help + Say Y if you want to add support for SoC audio on Nokia N900 + cellphone. + +config SND_OMAP_SOC_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on MACH_AMS_DELTA && TTY + select SND_SOC_OMAP_AMS_DELTA + help + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on MACH_OMAP_OSK && I2C + select SND_SOC_OMAP_OSK5912 + help + Say Y if you want to add support for SoC audio on osk5912. + +config SND_OMAP_SOC_OMAP_TWL4030 + tristate "SoC Audio support for TI SoC based boards with twl4030 codec" + depends on TWL4030_CORE + select SND_SOC_OMAP3_TWL4030 + help + Say Y if you want to add support for SoC audio on TI SoC based boards + using twl4030 as c codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_OMAP_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && COMMON_CLK + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_SOC_OMAP_ABE_TWL6040 + help + Say Y if you want to add support for SoC audio on OMAP boards using + ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - omap5-uevm (5432) + +config SND_OMAP_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on TWL4030_CORE + select SND_SOC_OMAP3_PANDORA + help + Say Y if you want to add support for SoC audio on the OMAP3 Pandora. +endmenu + +endmenu + diff --git a/sound/soc/ti/Makefile b/sound/soc/ti/Makefile new file mode 100644 index 000000000000..08c44d56ef3e --- /dev/null +++ b/sound/soc/ti/Makefile @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Platform drivers +snd-soc-ti-edma-objs := edma-pcm.o +snd-soc-ti-sdma-objs := sdma-pcm.o + +obj-$(CONFIG_SND_SOC_TI_EDMA_PCM) += snd-soc-ti-edma.o +obj-$(CONFIG_SND_SOC_TI_SDMA_PCM) += snd-soc-ti-sdma.o + +# CPU DAI drivers +snd-soc-davinci-asp-objs := davinci-i2s.o +snd-soc-davinci-mcasp-objs := davinci-mcasp.o +snd-soc-davinci-vcif-objs := davinci-vcif.o +snd-soc-omap-dmic-objs := omap-dmic.o +snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o +snd-soc-omap-mcpdm-objs := omap-mcpdm.o + +obj-$(CONFIG_SND_SOC_DAVINCI_ASP) += snd-soc-davinci-asp.o +obj-$(CONFIG_SND_SOC_DAVINCI_MCASP) += snd-soc-davinci-mcasp.o +obj-$(CONFIG_SND_SOC_DAVINCI_VCIF) += snd-soc-davinci-vcif.o +obj-$(CONFIG_SND_SOC_OMAP_DMIC) += snd-soc-omap-dmic.o +obj-$(CONFIG_SND_SOC_OMAP_MCBSP) += snd-soc-omap-mcbsp.o +obj-$(CONFIG_SND_SOC_OMAP_MCPDM) += snd-soc-omap-mcpdm.o + +# Machine drivers +snd-soc-davinci-evm-objs := davinci-evm.o +snd-soc-n810-objs := n810.o +snd-soc-rx51-objs := rx51.o +snd-soc-omap3pandora-objs := omap3pandora.o +snd-soc-omap-twl4030-objs := omap-twl4030.o +snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o +snd-soc-ams-delta-objs := ams-delta.o +snd-soc-omap-hdmi-objs := omap-hdmi.o +snd-soc-osk5912-objs := osk5912.o + +obj-$(CONFIG_SND_SOC_DAVINCI_EVM) += snd-soc-davinci-evm.o +obj-$(CONFIG_SND_SOC_NOKIA_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_SOC_NOKIA_RX51) += snd-soc-rx51.o +obj-$(CONFIG_SND_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o +obj-$(CONFIG_SND_SOC_OMAP3_TWL4030) += snd-soc-omap-twl4030.o +obj-$(CONFIG_SND_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o +obj-$(CONFIG_SND_SOC_OMAP_AMS_DELTA) += snd-soc-ams-delta.o +obj-$(CONFIG_SND_SOC_OMAP_HDMI) += snd-soc-omap-hdmi.o +obj-$(CONFIG_SND_SOC_OMAP_OSK5912) += snd-soc-osk5912.o diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/ti/ams-delta.c index 4dce494dfbd3..4dce494dfbd3 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/ti/ams-delta.c diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/ti/davinci-evm.c index 7a369e0f2093..4869d6311510 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/ti/davinci-evm.c @@ -170,7 +170,7 @@ static struct snd_soc_dai_link dm355_evm_dai = { }; static struct snd_soc_dai_link dm365_evm_dai = { -#ifdef CONFIG_SND_DM365_AIC3X_CODEC +#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC .name = "TLV320AIC3X", .stream_name = "AIC3X", .cpu_dai_name = "davinci-mcbsp", @@ -181,7 +181,7 @@ static struct snd_soc_dai_link dm365_evm_dai = { .ops = &evm_ops, .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, -#elif defined(CONFIG_SND_DM365_VOICE_CODEC) |