diff options
78 files changed, 2494 insertions, 1475 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 3c6624881375..f155eff910f9 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1233,7 +1233,7 @@ KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Proximity measurement indicating that some - object is near the sensor, usually be observing + object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements @@ -1255,12 +1255,23 @@ Description: What: /sys/.../iio:deviceX/in_intensityY_raw What: /sys/.../iio:deviceX/in_intensityY_ir_raw What: /sys/.../iio:deviceX/in_intensityY_both_raw +What: /sys/.../iio:deviceX/in_intensityY_uv_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Unit-less light intensity. Modifiers both and ir indicate that measurements contains visible and infrared light - components or just infrared light, respectively. + components or just infrared light, respectively. Modifier uv indicates + that measurements contain ultraviolet light components. + +What: /sys/.../iio:deviceX/in_uvindex_input +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + UV light intensity index measuring the human skin's response to + different wavelength of sunlight weighted according to the + standardised CIE Erythemal Action Spectrum. UV index values range + from 0 (low) to >=11 (extreme). What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index 165937e1ac1c..45f5c5c5929c 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -1,4 +1,4 @@ -Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC +Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q triaxial accelerometer Required properties: @@ -9,6 +9,7 @@ Required properties: * "fsl,mma8453" * "fsl,mma8652" * "fsl,mma8653" + * "fsl,fxls8471" - reg: the I2C address of the chip diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt new file mode 100644 index 000000000000..0bcae5140bc5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt @@ -0,0 +1,21 @@ +NXP LPC1850 ADC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: + +adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index a9a5fe19ff2a..bf99e2f24788 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -1,7 +1,11 @@ Rockchip Successive Approximation Register (SAR) A/D Converter bindings Required properties: -- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc" +- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc" + - "rockchip,saradc": for rk3188, rk3288 + - "rockchip,rk3066-tsadc": for rk3036 + - "rockchip,rk3399-saradc": for rk3399 + - reg: physical base address of the controller and length of memory mapped region. - interrupts: The interrupt number to the cpu. The interrupt specifier format diff --git a/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt new file mode 100644 index 000000000000..7d6647d4af5e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/lpc1850-dac.txt @@ -0,0 +1,20 @@ +NXP LPC1850 DAC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-dac" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: +dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + vref-supply = <®_vdda>; + resets = <&rgu 42>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index 011679f1a425..34a3206eefdf 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -8,6 +8,7 @@ Required properties: Optional properties: - gpios : should be device tree identifier of the magnetometer DRDY pin + - vdd-supply: an optional regulator that needs to be on to provide VDD Example: @@ -15,4 +16,5 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; + vdd-supply = <&ldo_3v3_gnss>; }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt new file mode 100644 index 000000000000..3ccba16f7035 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp4131.txt @@ -0,0 +1,84 @@ +* Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer + driver + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp4131-502" + "microchip,mcp4131-103" + "microchip,mcp4131-503" + "microchip,mcp4131-104" + "microchip,mcp4132-502" + "microchip,mcp4132-103" + "microchip,mcp4132-503" + "microchip,mcp4132-104" + "microchip,mcp4141-502" + "microchip,mcp4141-103" + "microchip,mcp4141-503" + "microchip,mcp4141-104" + "microchip,mcp4142-502" + "microchip,mcp4142-103" + "microchip,mcp4142-503" + "microchip,mcp4142-104" + "microchip,mcp4151-502" + "microchip,mcp4151-103" + "microchip,mcp4151-503" + "microchip,mcp4151-104" + "microchip,mcp4152-502" + "microchip,mcp4152-103" + "microchip,mcp4152-503" + "microchip,mcp4152-104" + "microchip,mcp4161-502" + "microchip,mcp4161-103" + "microchip,mcp4161-503" + "microchip,mcp4161-104" + "microchip,mcp4162-502" + "microchip,mcp4162-103" + "microchip,mcp4162-503" + "microchip,mcp4162-104" + "microchip,mcp4231-502" + "microchip,mcp4231-103" + "microchip,mcp4231-503" + "microchip,mcp4231-104" + "microchip,mcp4232-502" + "microchip,mcp4232-103" + "microchip,mcp4232-503" + "microchip,mcp4232-104" + "microchip,mcp4241-502" + "microchip,mcp4241-103" + "microchip,mcp4241-503" + "microchip,mcp4241-104" + "microchip,mcp4242-502" + "microchip,mcp4242-103" + "microchip,mcp4242-503" + "microchip,mcp4242-104" + "microchip,mcp4251-502" + "microchip,mcp4251-103" + "microchip,mcp4251-503" + "microchip,mcp4251-104" + "microchip,mcp4252-502" + "microchip,mcp4252-103" + "microchip,mcp4252-503" + "microchip,mcp4252-104" + "microchip,mcp4261-502" + "microchip,mcp4261-103" + "microchip,mcp4261-503" + "microchip,mcp4261-104" + "microchip,mcp4262-502" + "microchip,mcp4262-103" + "microchip,mcp4262-503" + "microchip,mcp4262-104" + +Example: +mcp4131: mcp4131@0 { + compatible = "mcp4131-502"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file mode 100644 index 000000000000..17bca866c084 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt @@ -0,0 +1,19 @@ +MEAS ms5611 family pressure sensors + +Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +Required properties: +- compatible: "meas,ms5611" or "meas,ms5607" +- reg: the I2C address or SPI chip select the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. + +Example: + +ms5607@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index d4b87cc1e446..71b7bdff21cd 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -37,6 +37,7 @@ Accelerometers: - st,lsm330-accel - st,lsm303agr-accel - st,lis2dh12-accel +- st,h3lis331dl-accel Gyroscopes: - st,l3g4200d-gyro diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 86740d4a270d..e4e54868d456 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -141,6 +141,7 @@ lsi LSI Corp. (LSI Logic) lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +meas Measurement Specialties mediatek MediaTek Inc. melexis Melexis N.V. merrii Merrii Technology Co., Ltd. diff --git a/MAINTAINERS b/MAINTAINERS index 03e00c7c88eb..1ace393e963c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5538,7 +5538,7 @@ IIO SUBSYSTEM AND DRIVERS M: Jonathan Cameron <jic23@kernel.org> R: Hartmut Knaack <knaack.h@gmx.de> R: Lars-Peter Clausen <lars@metafoo.de> -R: Peter Meerwald <pmeerw@pmeerw.net> +R: Peter Meerwald-Stadler <pmeerw@pmeerw.net> L: linux-iio@vger.kernel.org S: Maintained F: drivers/iio/ diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index b0d3ecf3318b..e4a758cd7d35 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS help Say yes here to build support for STMicroelectronics accelerometers: LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, - LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12. + LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL. This driver can also be built as a module. If so, these modules will be created: @@ -143,7 +143,8 @@ config MMA8452 select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following Freescale 3-axis - accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, + FXLS8471Q. To compile this driver as a module, choose M here: the module will be called mma8452. diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index c73331f7782b..e631ee9a6a77 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/acpi.h> -#include <linux/gpio/consumer.h> #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/iio/iio.h> @@ -138,6 +137,7 @@ enum bmc150_accel_axis { AXIS_X, AXIS_Y, AXIS_Z, + AXIS_MAX, }; enum bmc150_power_modes { @@ -246,11 +246,12 @@ static const struct { {500000, BMC150_ACCEL_SLEEP_500_MS}, {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; -static const struct regmap_config bmc150_i2c_regmap_conf = { +const struct regmap_config bmc150_regmap_conf = { .reg_bits = 8, .val_bits = 8, .max_register = 0x3f, }; +EXPORT_SYMBOL_GPL(bmc150_regmap_conf); static int bmc150_accel_set_mode(struct bmc150_accel_data *data, enum bmc150_power_modes mode, @@ -988,6 +989,7 @@ static const struct iio_event_spec bmc150_accel_event = { .realbits = (bits), \ .storagebits = 16, \ .shift = 16 - (bits), \ + .endianness = IIO_LE, \ }, \ .event_spec = &bmc150_accel_event, \ .num_event_specs = 1 \ @@ -1104,27 +1106,23 @@ static const struct iio_info bmc150_accel_info_fifo = { .driver_module = THIS_MODULE, }; +static const unsigned long bmc150_accel_scan_masks[] = { + BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z), + 0}; + static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmc150_accel_data *data = iio_priv(indio_dev); - int bit, ret, i = 0; - unsigned int raw_val; + int ret; mutex_lock(&data->mutex); - for_each_set_bit(bit, indio_dev->active_scan_mask, - indio_dev->masklength) { - ret = regmap_bulk_read(data->regmap, - BMC150_ACCEL_AXIS_TO_REG(bit), &raw_val, - 2); - if (ret < 0) { - mutex_unlock(&data->mutex); - goto err_read; - } - data->buffer[i++] = raw_val; - } + ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_REG_XOUT_L, + data->buffer, AXIS_MAX * 2); mutex_unlock(&data->mutex); + if (ret < 0) + goto err_read; iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, pf->timestamp); @@ -1574,6 +1572,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, indio_dev->channels = data->chip_info->channels; indio_dev->num_channels = data->chip_info->num_channels; indio_dev->name = name ? name : data->chip_info->name; + indio_dev->available_scan_masks = bmc150_accel_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmc150_accel_info; diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index b41404ba32fc..8ca8041267ef 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -28,11 +28,6 @@ #include "bmc150-accel.h" -static const struct regmap_config bmc150_i2c_regmap_conf = { - .reg_bits = 8, - .val_bits = 8, -}; - static int bmc150_accel_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -43,7 +38,7 @@ static int bmc150_accel_probe(struct i2c_client *client, i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK); - regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf); + regmap = devm_regmap_init_i2c(client, &bmc150_regmap_conf); if (IS_ERR(regmap)) { dev_err(&client->dev, "Failed to initialize i2c regmap\n"); return PTR_ERR(regmap); diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c index 16b66f2a7204..006794a70a1f 100644 --- a/drivers/iio/accel/bmc150-accel-spi.c +++ b/drivers/iio/accel/bmc150-accel-spi.c @@ -25,18 +25,12 @@ #include "bmc150-accel.h" -static const struct regmap_config bmc150_spi_regmap_conf = { - .reg_bits = 8, - .val_bits = 8, - .max_register = 0x3f, -}; - static int bmc150_accel_pro |