diff options
83 files changed, 1889 insertions, 1361 deletions
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index 0dbabe9a6b0a..2251dccb141e 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -67,6 +67,11 @@ Optional properties: disable if zero. - arm,prefetch-offset : Override prefetch offset value. Valid values are 0-7, 15, 23, and 31. +- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) +- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) Example: diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index e49e423268c0..04d34f6a58f3 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -856,6 +856,10 @@ address which can extend beyond that limit. name may clash with standard defined ones, you prefix them with your vendor name and a comma. + Additional properties for the root node: + + - serial-number : a string representing the device's serial number + b) The /cpus node This node is the parent of all individual CPU nodes. It doesn't diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf292d3ec27f..a750c1425c3a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -33,8 +33,8 @@ config ARM select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 - select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL - select HAVE_ARCH_KGDB + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 + select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT @@ -45,7 +45,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS if MMU - select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) @@ -59,10 +59,10 @@ config ARM select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ - select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_MEMBLOCK - select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND + select HAVE_MOD_ARCH_SPECIFIC select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_OPTPROBES if !THUMB2_KERNEL select HAVE_PERF_EVENTS @@ -173,7 +173,7 @@ config LOCKDEP_SUPPORT config TRACE_IRQFLAGS_SUPPORT bool - default y + default !CPU_V7M config RWSEM_XCHGADD_ALGORITHM bool @@ -1010,11 +1010,6 @@ config PLAT_PXA config PLAT_VERSATILE bool -config ARM_TIMER_SP804 - bool - select CLKSRC_MMIO - select CLKSRC_OF if OF - source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig @@ -1342,6 +1337,7 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU || ARM_MPU + select IRQ_WORK help This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more @@ -1717,6 +1713,21 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE config ARCH_WANT_GENERAL_HUGETLB def_bool y +config ARM_MODULE_PLTS + bool "Use PLTs to allow module memory to spill over into vmalloc area" + depends on MODULES + help + Allocate PLTs when loading modules so that jumps and calls whose + targets are too far away for their relative offsets to be encoded + in the instructions themselves can be bounced via veneers in the + module's PLT. This allows modules to be allocated in the generic + vmalloc area after the dedicated module memory area has been + exhausted. The modules will use slightly more memory, but after + rounding up to page size, the actual memory footprint is usually + the same. + + Say y if you are getting out of memory errors while loading modules + source "mm/Kconfig" config FORCE_MAX_ZONEORDER @@ -1987,6 +1998,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) + depends on !CPU_V7M help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a6b5d0e35968..f1b157971366 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -5,6 +5,7 @@ source "lib/Kconfig.debug" config ARM_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL + depends on MMU select DEBUG_FS ---help--- Say Y here if you want to show the kernel pagetable layout in a diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2a4fae7e9c44..07ab3d203916 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -19,6 +19,10 @@ LDFLAGS_vmlinux += --be8 LDFLAGS_MODULE += --be8 endif +ifeq ($(CONFIG_ARM_MODULE_PLTS),y) +LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds +endif + OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 6e1fb2b2ecc7..7a13aebacf81 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -103,6 +103,8 @@ extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ hyp-stub.S +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING + ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 2c45b5709fa4..06e983f59980 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -130,7 +130,7 @@ start: .endr ARM( mov r0, r0 ) ARM( b 1f ) - THUMB( adr r12, BSYM(1f) ) + THUMB( badr r12, 1f ) THUMB( bx r12 ) .word _magic_sig @ Magic numbers to help the loader @@ -447,7 +447,7 @@ dtb_check_done: bl cache_clean_flush - adr r0, BSYM(restart) + badr r0, restart add r0, r0, r6 mov pc, r0 diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 70b1eff477b3..6ee5959a813b 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 5f8a52ac7edf..a923524d1040 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -20,6 +20,126 @@ #include <asm/cputype.h> #include <asm/suspend.h> +/* + * The public API for this code is documented in arch/arm/include/asm/mcpm.h. + * For a comprehensive description of the main algorithm used here, please + * see Documentation/arm/cluster-pm-race-avoidance.txt. + */ + +struct sync_struct mcpm_sync; + +/* + * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. + * This must be called at the point of committing to teardown of a CPU. + * The CPU cache (SCTRL.C bit) is expected to still be active. + */ +static void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) +{ + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); +} + +/* + * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the + * cluster can be torn down without disrupting this CPU. + * To avoid deadlocks, this must be called before a CPU is powered down. + * The CPU cache (SCTRL.C bit) is expected to be off. + * However L2 cache might or might not be active. + */ +static void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) +{ + dmb(); + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); + sev(); +} + +/* + * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. + * @state: the final state of the cluster: + * CLUSTER_UP: no destructive teardown was done and the cluster has been + * restored to the previous state (CPU cache still active); or + * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off + * (CPU cache disabled, L2 cache either enabled or disabled). + */ +static void __mcpm_outbound_leave_critical(unsigned int cluster, int state) +{ + dmb(); + mcpm_sync.clusters[cluster].cluster = state; + sync_cache_w(&mcpm_sync.clusters[cluster].cluster); + sev(); +} + +/* + * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. + * This function should be called by the last man, after local CPU teardown + * is complete. CPU cache expected to be active. + * + * Returns: + * false: the critical section was not entered because an inbound CPU was + * observed, or the cluster is already being set up; + * true: the critical section was entered: it is now safe to tear down the + * cluster. + */ +static bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) +{ + unsigned int i; + struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; + + /* Warn inbound CPUs that the cluster is being torn down: */ + c->cluster = CLUSTER_GOING_DOWN; + sync_cache_w(&c->cluster); + + /* Back out if the inbound cluster is already in the critical region: */ + sync_cache_r(&c->inbound); + if (c->inbound == INBOUND_COMING_UP) + goto abort; + + /* + * Wait for all CPUs to get out of the GOING_DOWN state, so that local + * teardown is complete on each CPU before tearing down the cluster. + * + * If any CPU has been woken up again from the DOWN state, then we + * shouldn't be taking the cluster down at all: abort in that case. + */ + sync_cache_r(&c->cpus); + for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { + int cpustate; + + if (i == cpu) + continue; + + while (1) { + cpustate = c->cpus[i].cpu; + if (cpustate != CPU_GOING_DOWN) + break; + + wfe(); + sync_cache_r(&c->cpus[i].cpu); + } + + switch (cpustate) { + case CPU_DOWN: + continue; + + default: + goto abort; + } + } + + return true; + +abort: + __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); + return false; +} + +static int __mcpm_cluster_state(unsigned int cluster) +{ + sync_cache_r(&mcpm_sync.clusters[cluster].cluster); + return mcpm_sync.clusters[cluster].cluster; +} + extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr) @@ -78,16 +198,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) bool cpu_is_down, cluster_is_down; int ret = 0; + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (!platform_ops) return -EUNATCH; /* try not to shadow power_up errors */ might_sleep(); - /* backward compatibility callback */ - if (platform_ops->power_up) - return platform_ops->power_up(cpu, cluster); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - /* * Since this is called with IRQs enabled, and no arch_spin_lock_irq * variant exists, we need to disable IRQs manually here. @@ -128,29 +243,17 @@ void mcpm_cpu_power_down(void) bool cpu_going_down, last_man; phys_reset_t phys_reset; + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (WARN_ON_ONCE(!platform_ops)) return; BUG_ON(!irqs_disabled()); - /* - * Do this before calling into the power_down method, - * as it might not always be safe to do afterwards. - */ setup_mm_for_reboot(); - /* backward compatibility callback */ - if (platform_ops->power_down) { - platform_ops->power_down(); - goto not_dead; - } - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - __mcpm_cpu_going_down(cpu, cluster); - arch_spin_lock(&mcpm_lock); BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); @@ -187,7 +290,6 @@ void mcpm_cpu_power_down(void) if (cpu_going_down) wfi(); -not_dead: /* * It is possible for a power_up request to happen concurrently * with a power_down request for the same CPU. In this case the @@ -219,22 +321,11 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) return ret; } -void mcpm_cpu_suspend(u64 expected_residency) +void mcpm_cpu_suspend(void) { if (WARN_ON_ONCE(!platform_ops)) return; - /* backward compatibility callback */ - if (platform_ops->suspend) { - phys_reset_t phys_reset; - BUG_ON(!irqs_disabled()); - setup_mm_for_reboot(); - platform_ops->suspend(expected_residency); - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset(virt_to_phys(mcpm_entry_point)); - BUG(); - } - /* Some platforms might have to enable special resume modes, etc. */ if (platform_ops->cpu_suspend_prepare) { unsigned int mpidr = read_cpuid_mpidr(); @@ -256,12 +347,6 @@ int mcpm_cpu_powered_up(void) if (!platform_ops) return -EUNATCH; - /* backward compatibility callback */ - if (platform_ops->powered_up) { - platform_ops->powered_up(); - return 0; - } - mpidr = read_cpuid_mpidr(); cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); @@ -334,120 +419,6 @@ int __init mcpm_loopback(void (*cache_disable)(void)) #endif -struct sync_struct mcpm_sync; - -/* - * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. - * This must be called at the point of committing to teardown of a CPU. - * The CPU cache (SCTRL.C bit) is expected to still be active. - */ -void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) -{ - mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; - sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); -} - -/* - * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the - * cluster can be torn down without disrupting this CPU. - * To avoid deadlocks, this must be called before a CPU is powered down. - * The CPU cache (SCTRL.C bit) is expected to be off. - * However L2 cache might or might not be active. - */ -void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) -{ - dmb(); |