diff options
| -rw-r--r-- | include/sound/rt5651.h | 11 | ||||
| -rw-r--r-- | sound/soc/codecs/rt5651.c | 19 | ||||
| -rw-r--r-- | sound/soc/codecs/rt5651.h | 11 |
3 files changed, 41 insertions, 0 deletions
diff --git a/include/sound/rt5651.h b/include/sound/rt5651.h index 725b36c329d0..6403b862fb9a 100644 --- a/include/sound/rt5651.h +++ b/include/sound/rt5651.h @@ -22,4 +22,15 @@ enum rt5651_jd_src { RT5651_JD2, }; +/* + * Note these MUST match the values from the DT binding: + * Documentation/devicetree/bindings/sound/rt5651.txt + */ +enum rt5651_ovcd_sf { + RT5651_OVCD_SF_0P5, + RT5651_OVCD_SF_0P75, + RT5651_OVCD_SF_1P0, + RT5651_OVCD_SF_1P5, +}; + #endif diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 7ff1bc892cfd..486817809b7b 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1632,6 +1632,10 @@ static int rt5651_set_jack(struct snd_soc_component *component, snd_soc_component_update_bits(component, RT5651_PWR_ANLG2, RT5651_PWR_JD_M, RT5651_PWR_JD_M); + /* Set OVCD threshold current and scale-factor */ + snd_soc_component_write(component, RT5651_PR_BASE + RT5651_BIAS_CUR4, + 0xa800 | rt5651->ovcd_sf); + snd_soc_component_update_bits(component, RT5651_MICBIAS, RT5651_MIC1_OVCD_MASK | RT5651_MIC1_OVTH_MASK | @@ -1685,7 +1689,13 @@ static void rt5651_apply_properties(struct snd_soc_component *component) "realtek,jack-detect-source", &val) == 0) rt5651->jd_src = val; + /* + * Testing on various boards has shown that good defaults for the OVCD + * threshold and scale-factor are 2000µA and 0.75. For an effective + * limit of 1500µA, this seems to be more reliable then 1500µA and 1.0. + */ rt5651->ovcd_th = RT5651_MIC1_OVTH_2000UA; + rt5651->ovcd_sf = RT5651_MIC_OVCD_SF_0P75; if (device_property_read_u32(component->dev, "realtek,over-current-threshold-microamp", &val) == 0) { @@ -1704,6 +1714,15 @@ static void rt5651_apply_properties(struct snd_soc_component *component) val); } } + + if (device_property_read_u32(component->dev, + "realtek,over-current-scale-factor", &val) == 0) { + if (val <= RT5651_OVCD_SF_1P5) + rt5651->ovcd_sf = val << RT5651_MIC_OVCD_SF_SFT; + else + dev_warn(component->dev, "Warning: Invalid over-current-scale-factor value: %d, defaulting to 0.75\n", + val); + } } static int rt5651_probe(struct snd_soc_component *component) diff --git a/sound/soc/codecs/rt5651.h b/sound/soc/codecs/rt5651.h index 9cd5c279d0d6..71738ab93fb9 100644 --- a/sound/soc/codecs/rt5651.h +++ b/sound/soc/codecs/rt5651.h @@ -138,6 +138,7 @@ /* Index of Codec Private Register definition */ #define RT5651_BIAS_CUR1 0x12 #define RT5651_BIAS_CUR3 0x14 +#define RT5651_BIAS_CUR4 0x15 #define RT5651_CLSD_INT_REG1 0x1c #define RT5651_CHPUMP_INT_REG1 0x24 #define RT5651_MAMP_INT_REG2 0x37 @@ -1966,6 +1967,15 @@ #define RT5651_D_GATE_EN_SFT 0 /* Codec Private Register definition */ + +/* MIC Over current threshold scale factor (0x15) */ +#define RT5651_MIC_OVCD_SF_MASK (0x3 << 8) +#define RT5651_MIC_OVCD_SF_SFT 8 +#define RT5651_MIC_OVCD_SF_0P5 (0x0 << 8) +#define RT5651_MIC_OVCD_SF_0P75 (0x1 << 8) +#define RT5651_MIC_OVCD_SF_1P0 (0x2 << 8) +#define RT5651_MIC_OVCD_SF_1P5 (0x3 << 8) + /* 3D Speaker Control (0x63) */ #define RT5651_3D_SPK_MASK (0x1 << 15) #define RT5651_3D_SPK_SFT 15 @@ -2065,6 +2075,7 @@ struct rt5651_priv { struct delayed_work jack_detect_work; enum rt5651_jd_src jd_src; unsigned int ovcd_th; + unsigned int ovcd_sf; int irq; int sysclk; |