diff options
66 files changed, 3256 insertions, 581 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-mmc b/Documentation/ABI/testing/sysfs-bus-mmc new file mode 100644 index 000000000000..519f028d19cc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-mmc @@ -0,0 +1,4 @@ +What: /sys/bus/mmc/devices/.../rev +Date: October 2017 +Contact: Jin Qian <jinqian@android.com> +Description: Extended CSD revision number diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt new file mode 100644 index 000000000000..8765c605e6bc --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt @@ -0,0 +1,54 @@ +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +The hardware provides an internal "mux" which allows up to three slots +to be controlled. Only one slot can be accessed at a time. + +Required properties: + - compatible : must be one of + - "amlogic,meson8-sdio" + - "amlogic,meson8b-sdio" + along with the generic "amlogic,meson-mx-sdio" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - #address-cells : must be 1 + - size-cells : must be 0 + - clocks : phandle to clock providers + - clock-names : must contain "core" and "clkin" + +Required child nodes: +A node for each slot provided by the MMC controller is required. +NOTE: due to a driver limitation currently only one slot (= child node) + is supported! + +Required properties on each child node (= slot): + - compatible : must be "mmc-slot" (see mmc.txt within this directory) + - reg : the slot (or "port") ID + +Optional properties on each child node (= slot): + - bus-width : must be 1 or 4 (8-bit bus is not supported) + - for cd and all other additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + + bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index b32ade645ad9..94a90b49a692 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -53,6 +53,9 @@ Optional properties: - no-sdio: controller is limited to send sdio cmd during initialization - no-sd: controller is limited to send sd cmd during initialization - no-mmc: controller is limited to send mmc cmd during initialization +- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. + The value <n> is the driver type as specified in the eMMC specification + (table 206 in spec version 5.1). *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea36ca5b..72d2a734ab85 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: Should contain phandle for the clock feeding the MMC controller +- clock-names: Should contain the following: + "source" - source clock (required) + "hclk" - HCLK which used for host (required) + "source_cg" - independent source clock gate (required for MT2712) - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +38,10 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) + Valid range = [0:0x7]. if not present, default value is 0. + applied to compatible "mediatek,mt2701-mmc". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt index de2c53cff4f1..3ee9263adf73 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt @@ -15,6 +15,8 @@ Required properties: Optional properties: - vqmmc-supply: phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- fujitsu,cmd-dat-delay-select: boolean property indicating that this host + requires the CMD_DAT_DELAY control to be enabled. Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 0576264eab5e..bfdcdc4ccdff 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -18,6 +18,8 @@ Required properties: "core" - SDC MMC clock (MCLK) (required) "bus" - SDCC bus voter clock (optional) "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt new file mode 100644 index 000000000000..51775a372c06 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -0,0 +1,16 @@ +* TI OMAP SDHCI Controller + +Refer to mmc.txt for standard MMC bindings. + +Required properties: +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 + +Example: + mmc1: mmc@4809c000 { + compatible = "ti,dra7-sdhci"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + }; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 54ef642f23a0..3c6762430fd9 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -10,7 +10,7 @@ described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. Required properties: -- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit +- compatible: should contain one or more of the following: "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC @@ -26,6 +26,16 @@ Required properties: "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller + "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller + "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1 + SDHI controller + "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller + + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. - clocks: Most controllers only have 1 clock source per channel. However, on some variations of this controller, the internal card detection @@ -43,3 +53,61 @@ Optional properties: - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl + +Example: R8A7790 (R-Car H2) SDHI controller nodes + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 48d8f05bf92b..779fa6dde58b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12067,6 +12067,12 @@ L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-spear.c +SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) TI OMAP DRIVER +M: Kishon Vijay Abraham I <kishon@ti.com> +L: linux-mmc@vger.kernel.org +S: Maintained +F: drivers/mmc/host/sdhci-omap.c + SECURE ENCRYPTING DEVICE (SED) OPAL DRIVER M: Scott Bauer <scott.bauer@intel.com> M: Jonathan Derrick <jonathan.derrick@intel.com> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index b99a27372965..26396ef53bde 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -682,8 +682,7 @@ }; mmc0: mmc@11230000 { - compatible = "mediatek,mt8173-mmc", - "mediatek,mt8135-mmc"; + compatible = "mediatek,mt8173-mmc"; reg = <0 0x11230000 0 0x1000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_0>, @@ -693,8 +692,7 @@ }; mmc1: mmc@11240000 { - compatible = "mediatek,mt8173-mmc", - "mediatek,mt8135-mmc"; + compatible = "mediatek,mt8173-mmc"; reg = <0 0x11240000 0 0x1000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_1>, @@ -704,8 +702,7 @@ }; mmc2: mmc@11250000 { - compatible = "mediatek,mt8173-mmc", - "mediatek,mt8135-mmc"; + compatible = "mediatek,mt8173-mmc"; reg = <0 0x11250000 0 0x1000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_2>, @@ -715,8 +712,7 @@ }; mmc3: mmc@11260000 { - compatible = "mediatek,mt8173-mmc", - "mediatek,mt8135-mmc"; + compatible = "mediatek,mt8173-mmc"; reg = <0 0x11260000 0 0x1000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>; clocks = <&pericfg CLK_PERI_MSDC30_3>, diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 2ad7b5c69156..ea80ff4cd7f9 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -28,6 +28,7 @@ #include <linux/hdreg.h> #include <linux/kdev_t.h> #include <linux/blkdev.h> +#include <linux/cdev.h> #include <linux/mutex.h> #include <linux/scatterlist.h> #include <linux/string_helpers.h> @@ -86,6 +87,7 @@ static int max_devices; #define MAX_DEVICES 256 static DEFINE_IDA(mmc_blk_ida); +static DEFINE_IDA(mmc_rpmb_ida); /* * There is one mmc_blk_data per slot. @@ -96,6 +98,7 @@ struct mmc_blk_data { struct gendisk *disk; struct mmc_queue queue; struct list_head part; + struct list_head rpmbs; unsigned int flags; #define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */ @@ -121,6 +124,32 @@ struct mmc_blk_data { int area_type; }; +/* Device type for RPMB character devices */ +static dev_t mmc_rpmb_devt; + +/* Bus type for RPMB character devices */ +static struct bus_type mmc_rpmb_bus_type = { + .name = "mmc_rpmb", +}; + +/** + * struct mmc_rpmb_data - special RPMB device type for these areas + * @dev: the device for the RPMB area + * @chrdev: character device for the RPMB area + * @id: unique device ID number + * @part_index: partition index (0 on first) + * @md: parent MMC block device + * @node: list item, so we can put this device on a list + */ +struct mmc_rpmb_data { + struct device dev; + struct cdev chrdev; + int id; + unsigned int part_index; + struct mmc_blk_data *md; + struct list_head node; +}; + static DEFINE_MUTEX(open_lock); module_param(perdev_minors, int, 0444); @@ -299,6 +328,7 @@ struct mmc_blk_ioc_data { struct mmc_ioc_cmd ic; unsigned char *buf; u64 buf_bytes; + struct mmc_rpmb_data *rpmb; }; static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( @@ -437,14 +467,25 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, struct mmc_request mrq = {}; struct scatterlist sg; int err; - bool is_rpmb = false; + unsigned int target_part; u32 status = 0; if (!card || !md || !idata) return -EINVAL; - if (md->area_type & MMC_BLK_DATA_AREA_RPMB) - is_rpmb = true; + /* + * The RPMB accesses comes in from the character device, so we + * need to target these explicitly. Else we just target the + * partition type for the block device the ioctl() was issued + * on. + */ + if (idata->rpmb) { + /* Support multiple RPMB partitions */ + target_part = idata->rpmb->part_index; + target_part |= EXT_CSD_PART_CONFIG_ACC_RPMB; + } else { + target_part = md->part_type; + } cmd.opcode = idata->ic.opcode; cmd.arg = idata->ic.arg; @@ -488,7 +529,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, mrq.cmd = &cmd; - err = mmc_blk_part_switch(card, md->part_type); + err = mmc_blk_part_switch(card, target_part); if (err) return err; @@ -498,7 +539,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, return err; } - if (is_rpmb) { + if (idata->rpmb) { err = mmc_set_blockcount(card, data.blocks, idata->ic.write_flag & (1 << 31)); if (err) @@ -538,7 +579,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp)); - if (is_rpmb) { + if (idata->rpmb) { /* * Ensure RPMB command has completed by polling CMD13 * "Send Status". @@ -554,7 +595,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, } static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md, - struct mmc_ioc_cmd __user *ic_ptr) + struct mmc_ioc_cmd __user *ic_ptr, + struct mmc_rpmb_data *rpmb) { struct mmc_blk_ioc_data *idata; struct mmc_blk_ioc_data *idatas[1]; @@ -566,6 +608,8 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md, idata = mmc_blk_ioctl_copy_from_user(ic_ptr); if (IS_ERR(idata)) return PTR_ERR(idata); + /* This will be NULL on non-RPMB ioctl():s */ + idata->rpmb = rpmb; card = md->queue.card; if (IS_ERR(card)) { @@ -581,7 +625,8 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md, idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, __GFP_RECLAIM); idatas[0] = idata; - req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL; + req_to_mmc_queue_req(req)->drv_op = + rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; req_to_mmc_queue_req(req)->drv_op_data = idatas; req_to_mmc_queue_req(req)->ioc_count = 1; blk_execute_rq(mq->queue, NULL, req, 0); @@ -596,7 +641,8 @@ cmd_done: } static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md, - struct mmc_ioc_multi_cmd __user *user) + struct mmc_ioc_multi_cmd __user *user, + struct mmc_rpmb_data *rpmb) { struct mmc_blk_ioc_data **idata = NULL; struct mmc_ioc_cmd __user *cmds = user->cmds; @@ -627,6 +673,8 @@ static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md, num_of_cmds = i; goto cmd_err; } + /* This will be NULL on non-RPMB ioctl():s */ + idata[i]->rpmb = rpmb; } card = md->queue.card; @@ -643,7 +691,8 @@ static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md, req = blk_get_request(mq->queue, idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, __GFP_RECLAIM); - req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL; + req_to_mmc_queue_req(req)->drv_op = + rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; req_to_mmc_queue_req(req)->drv_op_data = idata; req_to_mmc_queue_req(req)->ioc_count = num_of_cmds; blk_execute_rq(mq->queue, NULL, req, 0); @@ -691,7 +740,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, if (!md) return -EINVAL; ret = mmc_blk_ioctl_cmd(md, - (struct mmc_ioc_cmd __user *)arg); + (struct mmc_ioc_cmd __user *)arg, + NULL); mmc_blk_put(md); return ret; case MMC_IOC_MULTI_CMD: @@ -702,7 +752,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, if (!md) return -EINVAL; ret = mmc_blk_ioctl_multi_cmd(md, - (struct mmc_ioc_multi_cmd __user *)arg); + (struct mmc_ioc_multi_cmd __user *)arg, + NULL); mmc_blk_put(md); return ret; default: @@ -1152,18 +1203,6 @@ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) md->reset_done &= ~type; } -int mmc_access_rpmb(struct mmc_queue *mq) -{ - struct mmc_blk_data *md = mq->blkdata; - /* - * If this is a RPMB partition access, return ture - */ - if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) - return true; - - return false; -} - /* * The non-block commands come back from the block layer after it queued it and |