diff options
| -rw-r--r-- | tools/arch/arm/include/uapi/asm/kvm.h | 224 | ||||
| -rw-r--r-- | tools/arch/arm64/include/uapi/asm/kvm.h | 258 | ||||
| -rw-r--r-- | tools/arch/mips/include/uapi/asm/kvm.h | 208 | ||||
| -rw-r--r-- | tools/arch/powerpc/include/uapi/asm/kvm.h | 612 | ||||
| -rw-r--r-- | tools/arch/s390/include/uapi/asm/kvm.h | 192 | ||||
| -rw-r--r-- | tools/arch/s390/include/uapi/asm/kvm_perf.h | 25 | ||||
| -rw-r--r-- | tools/arch/s390/include/uapi/asm/sie.h | 250 | ||||
| -rw-r--r-- | tools/arch/x86/include/uapi/asm/kvm.h | 360 | ||||
| -rw-r--r-- | tools/arch/x86/include/uapi/asm/kvm_perf.h | 16 | ||||
| -rw-r--r-- | tools/arch/x86/include/uapi/asm/svm.h | 178 | ||||
| -rw-r--r-- | tools/arch/x86/include/uapi/asm/vmx.h | 136 | ||||
| -rw-r--r-- | tools/perf/MANIFEST | 15 | ||||
| -rw-r--r-- | tools/perf/Makefile.perf | 30 |
13 files changed, 2495 insertions, 9 deletions
diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..a2b3eb313a25 --- /dev/null +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_H__ +#define __ARM_KVM_H__ + +#include <linux/types.h> +#include <linux/psci.h> +#include <asm/ptrace.h> + +#define __KVM_HAVE_GUEST_DEBUG +#define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +/* Valid for svc_regs, abt_regs, und_regs, irq_regs in struct kvm_regs */ +#define KVM_ARM_SVC_sp svc_regs[0] +#define KVM_ARM_SVC_lr svc_regs[1] +#define KVM_ARM_SVC_spsr svc_regs[2] +#define KVM_ARM_ABT_sp abt_regs[0] +#define KVM_ARM_ABT_lr abt_regs[1] +#define KVM_ARM_ABT_spsr abt_regs[2] +#define KVM_ARM_UND_sp und_regs[0] +#define KVM_ARM_UND_lr und_regs[1] +#define KVM_ARM_UND_spsr und_regs[2] +#define KVM_ARM_IRQ_sp irq_regs[0] +#define KVM_ARM_IRQ_lr irq_regs[1] +#define KVM_ARM_IRQ_spsr irq_regs[2] + +/* Valid only for fiq_regs in struct kvm_regs */ +#define KVM_ARM_FIQ_r8 fiq_regs[0] +#define KVM_ARM_FIQ_r9 fiq_regs[1] +#define KVM_ARM_FIQ_r10 fiq_regs[2] +#define KVM_ARM_FIQ_fp fiq_regs[3] +#define KVM_ARM_FIQ_ip fiq_regs[4] +#define KVM_ARM_FIQ_sp fiq_regs[5] +#define KVM_ARM_FIQ_lr fiq_regs[6] +#define KVM_ARM_FIQ_spsr fiq_regs[7] + +struct kvm_regs { + struct pt_regs usr_regs; /* R0_usr - R14_usr, PC, CPSR */ + unsigned long svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ + unsigned long abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ + unsigned long und_regs[3]; /* SP_und, LR_und, SPSR_und */ + unsigned long irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ + unsigned long fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ +}; + +/* Supported Processor Types */ +#define KVM_ARM_TARGET_CORTEX_A15 0 +#define KVM_ARM_TARGET_CORTEX_A7 1 +#define KVM_ARM_NUM_TARGETS 2 + +/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ +#define KVM_ARM_DEVICE_TYPE_SHIFT 0 +#define KVM_ARM_DEVICE_TYPE_MASK (0xffff << KVM_ARM_DEVICE_TYPE_SHIFT) +#define KVM_ARM_DEVICE_ID_SHIFT 16 +#define KVM_ARM_DEVICE_ID_MASK (0xffff << KVM_ARM_DEVICE_ID_SHIFT) + +/* Supported device IDs */ +#define KVM_ARM_DEVICE_VGIC_V2 0 + +/* Supported VGIC address types */ +#define KVM_VGIC_V2_ADDR_TYPE_DIST 0 +#define KVM_VGIC_V2_ADDR_TYPE_CPU 1 + +#define KVM_VGIC_V2_DIST_SIZE 0x1000 +#define KVM_VGIC_V2_CPU_SIZE 0x2000 + +#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ +#define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ + +struct kvm_vcpu_init { + __u32 target; + __u32 features[7]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { +}; + +struct kvm_guest_debug_arch { +}; + +struct kvm_debug_exit_arch { +}; + +struct kvm_sync_regs { +}; + +struct kvm_arch_memory_slot { +}; + +/* If you need to interpret the index values, here is the key: */ +#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000 +#define KVM_REG_ARM_COPROC_SHIFT 16 +#define KVM_REG_ARM_32_OPC2_MASK 0x0000000000000007 +#define KVM_REG_ARM_32_OPC2_SHIFT 0 +#define KVM_REG_ARM_OPC1_MASK 0x0000000000000078 +#define KVM_REG_ARM_OPC1_SHIFT 3 +#define KVM_REG_ARM_CRM_MASK 0x0000000000000780 +#define KVM_REG_ARM_CRM_SHIFT 7 +#define KVM_REG_ARM_32_CRN_MASK 0x0000000000007800 +#define KVM_REG_ARM_32_CRN_SHIFT 11 + +#define ARM_CP15_REG_SHIFT_MASK(x,n) \ + (((x) << KVM_REG_ARM_ ## n ## _SHIFT) & KVM_REG_ARM_ ## n ## _MASK) + +#define __ARM_CP15_REG(op1,crn,crm,op2) \ + (KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT) | \ + ARM_CP15_REG_SHIFT_MASK(op1, OPC1) | \ + ARM_CP15_REG_SHIFT_MASK(crn, 32_CRN) | \ + ARM_CP15_REG_SHIFT_MASK(crm, CRM) | \ + ARM_CP15_REG_SHIFT_MASK(op2, 32_OPC2)) + +#define ARM_CP15_REG32(...) (__ARM_CP15_REG(__VA_ARGS__) | KVM_REG_SIZE_U32) + +#define __ARM_CP15_REG64(op1,crm) \ + (__ARM_CP15_REG(op1, 0, crm, 0) | KVM_REG_SIZE_U64) +#define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__) + +#define KVM_REG_ARM_TIMER_CTL ARM_CP15_REG32(0, 14, 3, 1) +#define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) +#define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) + +/* Normal registers are mapped as coprocessor 16. */ +#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4) + +/* Some registers need more space to represent values. */ +#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00 +#define KVM_REG_ARM_DEMUX_ID_SHIFT 8 +#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT) +#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF +#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0 + +/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */ +#define KVM_REG_ARM_VFP (0x0012 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_VFP_MASK 0x000000000000FFFF +#define KVM_REG_ARM_VFP_BASE_REG 0x0 +#define KVM_REG_ARM_VFP_FPSID 0x1000 +#define KVM_REG_ARM_VFP_FPSCR 0x1001 +#define KVM_REG_ARM_VFP_MVFR1 0x1006 +#define KVM_REG_ARM_VFP_MVFR0 0x1007 +#define KVM_REG_ARM_VFP_FPEXC 0x1008 +#define KVM_REG_ARM_VFP_FPINST 0x1009 +#define KVM_REG_ARM_VFP_FPINST2 0x100A + +/* Device Control API: ARM VGIC */ +#define KVM_DEV_ARM_VGIC_GRP_ADDR 0 +#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 +#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 +#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 +#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 +#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 +#define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_CTRL_INIT 0 + +/* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_TYPE_SHIFT 24 +#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_VCPU_SHIFT 16 +#define KVM_ARM_IRQ_VCPU_MASK 0xff +#define KVM_ARM_IRQ_NUM_SHIFT 0 +#define KVM_ARM_IRQ_NUM_MASK 0xffff + +/* irq_type field */ +#define KVM_ARM_IRQ_TYPE_CPU 0 +#define KVM_ARM_IRQ_TYPE_SPI 1 +#define KVM_ARM_IRQ_TYPE_PPI 2 + +/* out-of-kernel GIC cpu interrupt injection irq_number field */ +#define KVM_ARM_IRQ_CPU_IRQ 0 +#define KVM_ARM_IRQ_CPU_FIQ 1 + +/* + * This used to hold the highest supported SPI, but it is now obsolete + * and only here to provide source code level compatibility with older + * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. + */ +#ifndef __KERNEL__ +#define KVM_ARM_IRQ_GIC_MAX 127 +#endif + +/* One single KVM irqchip, ie. the VGIC */ +#define KVM_NR_IRQCHIPS 1 + +/* PSCI interface */ +#define KVM_PSCI_FN_BASE 0x95c1ba5e +#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n)) + +#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0) +#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1) +#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) +#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) + +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED + +#endif /* __ARM_KVM_H__ */ diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..f209ea151dca --- /dev/null +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2012,2013 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * Derived from arch/arm/include/uapi/asm/kvm.h: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KVM_H__ +#define __ARM_KVM_H__ + +#define KVM_SPSR_EL1 0 +#define KVM_SPSR_SVC KVM_SPSR_EL1 +#define KVM_SPSR_ABT 1 +#define KVM_SPSR_UND 2 +#define KVM_SPSR_IRQ 3 +#define KVM_SPSR_FIQ 4 +#define KVM_NR_SPSR 5 + +#ifndef __ASSEMBLY__ +#include <linux/psci.h> +#include <linux/types.h> +#include <asm/ptrace.h> + +#define __KVM_HAVE_GUEST_DEBUG +#define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +struct kvm_regs { + struct user_pt_regs regs; /* sp = sp_el0 */ + + __u64 sp_el1; + __u64 elr_el1; + + __u64 spsr[KVM_NR_SPSR]; + + struct user_fpsimd_state fp_regs; +}; + +/* + * Supported CPU Targets - Adding a new target type is not recommended, + * unless there are some special registers not supported by the + * genericv8 syreg table. + */ +#define KVM_ARM_TARGET_AEM_V8 0 +#define KVM_ARM_TARGET_FOUNDATION_V8 1 +#define KVM_ARM_TARGET_CORTEX_A57 2 +#define KVM_ARM_TARGET_XGENE_POTENZA 3 +#define KVM_ARM_TARGET_CORTEX_A53 4 +/* Generic ARM v8 target */ +#define KVM_ARM_TARGET_GENERIC_V8 5 + +#define KVM_ARM_NUM_TARGETS 6 + +/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ +#define KVM_ARM_DEVICE_TYPE_SHIFT 0 +#define KVM_ARM_DEVICE_TYPE_MASK (0xffff << KVM_ARM_DEVICE_TYPE_SHIFT) +#define KVM_ARM_DEVICE_ID_SHIFT 16 +#define KVM_ARM_DEVICE_ID_MASK (0xffff << KVM_ARM_DEVICE_ID_SHIFT) + +/* Supported device IDs */ +#define KVM_ARM_DEVICE_VGIC_V2 0 + +/* Supported VGIC address types */ +#define KVM_VGIC_V2_ADDR_TYPE_DIST 0 +#define KVM_VGIC_V2_ADDR_TYPE_CPU 1 + +#define KVM_VGIC_V2_DIST_SIZE 0x1000 +#define KVM_VGIC_V2_CPU_SIZE 0x2000 + +/* Supported VGICv3 address types */ +#define KVM_VGIC_V3_ADDR_TYPE_DIST 2 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 + +#define KVM_VGIC_V3_DIST_SIZE SZ_64K +#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) + +#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ +#define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */ +#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */ +#define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */ + +struct kvm_vcpu_init { + __u32 target; + __u32 features[7]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { +}; + +/* + * See v8 ARM ARM D7.3: Debug Registers + * + * The architectural limit is 16 debug registers of each type although + * in practice there are usually less (see ID_AA64DFR0_EL1). + * + * Although the control registers are architecturally defined as 32 + * bits wide we use a 64 bit structure here to keep parity with + * KVM_GET/SET_ONE_REG behaviour which treats all system registers as + * 64 bit values. It also allows for the possibility of the + * architecture expanding the control registers without having to + * change the userspace ABI. + */ +#define KVM_ARM_MAX_DBG_REGS 16 +struct kvm_guest_debug_arch { + __u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS]; +}; + +struct kvm_debug_exit_arch { + __u32 hsr; + __u64 far; /* used for watchpoints */ +}; + +/* + * Architecture specific defines for kvm_guest_debug->control + */ + +#define KVM_GUESTDBG_USE_SW_BP (1 << 16) +#define KVM_GUESTDBG_USE_HW (1 << 17) + +struct kvm_sync_regs { +}; + +struct kvm_arch_memory_slot { +}; + +/* If you need to interpret the index values, here is the key: */ +#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000 +#define KVM_REG_ARM_COPROC_SHIFT 16 + +/* Normal registers are mapped as coprocessor 16. */ +#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / sizeof(__u32)) + +/* Some registers need more space to represent values. */ +#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00 +#define KVM_REG_ARM_DEMUX_ID_SHIFT 8 +#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT) +#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF +#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0 + +/* AArch64 system registers */ +#define KVM_REG_ARM64_SYSREG (0x0013 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM64_SYSREG_OP0_MASK 0x000000000000c000 +#define KVM_REG_ARM64_SYSREG_OP0_SHIFT 14 +#define KVM_REG_ARM64_SYSREG_OP1_MASK 0x0000000000003800 +#define KVM_REG_ARM64_SYSREG_OP1_SHIFT 11 +#define KVM_REG_ARM64_SYSREG_CRN_MASK 0x0000000000000780 +#define KVM_REG_ARM64_SYSREG_CRN_SHIFT 7 +#define KVM_REG_ARM64_SYSREG_CRM_MASK 0x0000000000000078 +#define KVM_REG_ARM64_SYSREG_CRM_SHIFT 3 +#define KVM_REG_ARM64_SYSREG_OP2_MASK 0x0000000000000007 +#define KVM_REG_ARM64_SYSREG_OP2_SHIFT 0 + +#define ARM64_SYS_REG_SHIFT_MASK(x,n) \ + (((x) << KVM_REG_ARM64_SYSREG_ ## n ## _SHIFT) & \ + KVM_REG_ARM64_SYSREG_ ## n ## _MASK) + +#define __ARM64_SYS_REG(op0,op1,crn,crm,op2) \ + (KVM_REG_ARM64 | KVM_REG_ARM64_SYSREG | \ + ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ARM64_SYS_REG(...) (__ARM64_SYS_REG(__VA_ARGS__) | KVM_REG_SIZE_U64) + +#define KVM_REG_ARM_TIMER_CTL ARM64_SYS_REG(3, 3, 14, 3, 1) +#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) +#define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2) + +/* Device Control API: ARM VGIC */ +#define KVM_DEV_ARM_VGIC_GRP_ADDR 0 +#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 +#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 +#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 +#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 +#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 +#define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_CTRL_INIT 0 + +/* Device Control API on vcpu fd */ +#define KVM_ARM_VCPU_PMU_V3_CTRL 0 +#define KVM_ARM_VCPU_PMU_V3_IRQ 0 +#define KVM_ARM_VCPU_PMU_V3_INIT 1 + +/* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_TYPE_SHIFT 24 +#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_VCPU_SHIFT 16 +#define KVM_ARM_IRQ_VCPU_MASK 0xff +#define KVM_ARM_IRQ_NUM_SHIFT 0 +#define KVM_ARM_IRQ_NUM_MASK 0xffff + +/* irq_type field */ +#define KVM_ARM_IRQ_TYPE_CPU 0 +#define KVM_ARM_IRQ_TYPE_SPI 1 +#define KVM_ARM_IRQ_TYPE_PPI 2 + +/* out-of-kernel GIC cpu interrupt injection irq_number field */ +#define KVM_ARM_IRQ_CPU_IRQ 0 +#define KVM_ARM_IRQ_CPU_FIQ 1 + +/* + * This used to hold the highest supported SPI, but it is now obsolete + * and only here to provide source code level compatibility with older + * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. + */ +#ifndef __KERNEL__ +#define KVM_ARM_IRQ_GIC_MAX 127 +#endif + +/* One single KVM irqchip, ie. the VGIC */ +#define KVM_NR_IRQCHIPS 1 + +/* PSCI interface */ +#define KVM_PSCI_FN_BASE 0x95c1ba5e +#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n)) + +#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0) +#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1) +#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) +#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) + +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED + +#endif + +#endif /* __ARM_KVM_H__ */ diff --git a/tools/arch/mips/include/uapi/asm/kvm.h b/tools/arch/mips/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..6985eb59b085 --- /dev/null +++ b/tools/arch/mips/include/uapi/asm/kvm.h @@ -0,0 +1,208 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal <sanjayl@kymasys.com> + */ + +#ifndef __LINUX_KVM_MIPS_H +#define __LINUX_KVM_MIPS_H + +#include <linux/types.h> + +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ + +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ +struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; + __u64 hi; + __u64 lo; + __u64 pc; +}; + +/* + * for KVM_GET_FPU and KVM_SET_FPU + */ +struct kvm_fpu { +}; + + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access various + * registers. The id field is broken down as follows: + * + * bits[63..52] - As per linux/kvm.h + * bits[51..32] - Must be zero. + * bits[31..16] - Register set. + * + * Register set = 0: GP registers from kvm_regs (see definitions below). + * + * Register set = 1: CP0 registers. + * bits[15..8] - Must be zero. + * bits[7..3] - Register 'rd' index. + * bits[2..0] - Register 'sel' index. + * + * Register set = 2: KVM specific registers (see definitions below). + * + * Register set = 3: FPU / MSA registers (see definitions below). + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[31..16]. + */ + +#define KVM_REG_MIPS_GP (KVM_REG_MIPS | 0x0000000000000000ULL) +#define KVM_REG_MIPS_CP0 (KVM_REG_MIPS | 0x0000000000010000ULL) +#define KVM_REG_MIPS_KVM (KVM_REG_MIPS | 0x0000000000020000ULL) +#define KVM_REG_MIPS_FPU (KVM_REG_MIPS | 0x0000000000030000ULL) + + +/* + * KVM_REG_MIPS_GP - General purpose registers from kvm_regs. + */ + +#define KVM_REG_MIPS_R0 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_R1 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 1) +#define KVM_REG_MIPS_R2 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 2) +#define KVM_REG_MIPS_R3 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 3) +#define KVM_REG_MIPS_R4 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 4) +#define KVM_REG_MIPS_R5 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 5) +#define KVM_REG_MIPS_R6 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 6) +#define KVM_REG_MIPS_R7 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 7) +#define KVM_REG_MIPS_R8 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 8) +#define KVM_REG_MIPS_R9 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 9) +#define KVM_REG_MIPS_R10 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 10) +#define KVM_REG_MIPS_R11 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 11) +#define KVM_REG_MIPS_R12 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 12) +#define KVM_REG_MIPS_R13 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 13) +#define KVM_REG_MIPS_R14 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 14) +#define KVM_REG_MIPS_R15 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 15) +#define KVM_REG_MIPS_R16 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 16) +#define KVM_REG_MIPS_R17 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 17) +#define KVM_REG_MIPS_R18 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 18) +#define KVM_REG_MIPS_R19 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 19) +#define KVM_REG_MIPS_R20 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 20) +#define KVM_REG_MIPS_R21 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 21) +#define KVM_REG_MIPS_R22 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 22) +#define KVM_REG_MIPS_R23 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 23) +#define KVM_REG_MIPS_R24 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 24) +#define KVM_REG_MIPS_R25 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 25) +#define KVM_REG_MIPS_R26 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 26) +#define KVM_REG_MIPS_R27 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 27) +#define KVM_REG_MIPS_R28 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 28) +#define KVM_REG_MIPS_R29 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 29) +#define KVM_REG_MIPS_R30 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 30) +#define KVM_REG_MIPS_R31 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 31) + +#define KVM_REG_MIPS_HI (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 32) +#define KVM_REG_MIPS_LO (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 33) +#define KVM_REG_MIPS_PC (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 34) + + +/* + * KVM_REG_MIPS_KVM - KVM specific control registers. + */ + +/* + * CP0_Count control + * DC: Set 0: Master disable CP0_Count and set COUNT_RESUME to now + * Set 1: Master re-enable CP0_Count with unchanged bias, handling timer + * interrupts since COUNT_RESUME + * This can be used to freeze the timer to get a consistent snapshot of + * the CP0_Count and timer interrupt pending state, while also resuming + * safely without losing time or guest timer interrupts. + * Other: Reserved, do not change. + */ +#define KVM_REG_MIPS_COUNT_CTL (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 0) +#define KVM_REG_MIPS_COUNT_CTL_DC 0x00000001 + +/* + * CP0_Count resume monotonic nanoseconds + * The monotonic nanosecond time of the last set of COUNT_CTL.DC (master + * disable). Any reads and writes of Count related registers while + * COUNT_CTL.DC=1 will appear to occur at this time. When COUNT_CTL.DC is + * cleared again (master enable) any timer interrupts since this time will be + * emulated. + * Modifications to times in the future are rejected. + */ +#define KVM_REG_MIPS_COUNT_RESUME (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 1) +/* + * CP0_Count rate in Hz + * Specifies the rate of the CP0_Count timer in Hz. Modifications occur without + * discontinuities in CP0_Count. + */ +#define KVM_REG_MIPS_COUNT_HZ (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 2) + + +/* + * KVM_REG_MIPS_FPU - Floating Point and MIPS SIMD Architecture (MSA) registers. + * + * bits[15..8] - Register subset (see definitions below). + * bits[7..5] - Must be zero. + * bits[4..0] - Register number within register subset. + */ + +#define KVM_REG_MIPS_FPR (KVM_REG_MIPS_FPU | 0x0000000000000000ULL) +#define KVM_REG_MIPS_FCR (KVM_REG_MIPS_FPU | 0x0000000000000100ULL) +#define KVM_REG_MIPS_MSACR (KVM_REG_MIPS_FPU | 0x0000000000000200ULL) + +/* + * KVM_REG_MIPS_FPR - Floating point / Vector registers. + */ +#define KVM_REG_MIPS_FPR_32(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U32 | (n)) +#define KVM_REG_MIPS_FPR_64(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U64 | (n)) +#define KVM_REG_MIPS_VEC_128(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U128 | (n)) + +/* + * KVM_REG_MIPS_FCR - Floating point control registers. + */ +#define KVM_REG_MIPS_FCR_IR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 0) +#define KVM_REG_MIPS_FCR_CSR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 31) + +/* + * KVM_REG_MIPS_MSACR - MIPS SIMD Architecture (MSA) control registers. + */ +#define KVM_REG_MIPS_MSA_IR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 0) +#define KVM_REG_MIPS_MSA_CSR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 1) + + +/* + * KVM MIPS specific structures and definitions + * + */ +struct kvm_debug_exit_arch { + __u64 epc; +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { +}; + +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + +struct kvm_mips_interrupt { + /* in */ + __u32 cpu; + __u32 irq; +}; + +#endif /* __LINUX_KVM_MIPS_H */ diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h new file mode 100644 index 000000000000..c93cf35ce379 --- /dev/null +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -0,0 +1,612 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __LINUX_KVM_POWERPC_H +#define __LINUX_KVM_POWERPC_H + +#include <linux/types.h> + +/* Select powerpc specific features in <linux/kvm.h> */ +#define __KVM_HAVE_SPAPR_TCE +#define __KVM_HAVE_PPC_SMT +#define __KVM_HAVE_IRQCHIP +#define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_GUEST_DEBUG + +struct kvm_regs { + __u64 pc; + __u64 cr; + __u64 ctr; + __u64 lr; + __u64 xer; + __u64 msr; + __u64 srr0; + __u64 srr1; + __u64 pid; + + __u64 sprg0; + __u64 sprg1; + __u64 sprg2; + __u64 sprg3; + __u64 sprg4; + __u64 sprg5; + __u64 sprg6; + __u64 sprg7; + + __u64 gpr[32]; +}; + +#define KVM_SREGS_E_IMPL_NONE 0 +#define KVM_SREGS_E_IMPL_FSL 1 + +#define KVM_SREGS_E_FSL_PIDn (1 << 0) /* PID1/PID2 */ + +/* + * Feature bits indicate which sections of the sregs struct are valid, + * both in KVM_GET_SREGS and KVM_SET_SREGS. On KVM_SET_SREGS, registers + * corresponding to unset feature bits will not be modified. This allows + * restoring a checkpoint made without that feature, while keeping the + * default values of the new registers. + * + * KVM_SREGS_E_BASE contains: + * CSRR0/1 (refers to SRR2/3 on 40x) + * ESR + * DEAR + * MCSR + * TSR + * TCR + * DEC + * TB + * VRSAVE (USPRG0) + */ +#define KVM_SREGS_E_BASE (1 << 0) + +/* + * KVM_SREGS_E_ARCH206 contains: + * + * PIR + * MCSRR0/1 + * DECAR + * IVPR + */ +#define KVM_SREGS_E_ARCH206 (1 << 1) + +/* + * Contains EPCR, plus the upper half of 64-bit registers + * that are 32-bit on 32-bit implementations. + */ +#define KVM_SREGS_E_64 (1 << 2) + +#define KVM_SREGS_E_SPRG8 (1 << 3) +#define KVM_SREGS_E_MCIVPR (1 << 4) + +/* + * IVORs are used -- contains IVOR0-15, plus additional IVORs + * in combination with an appropriate feature bit. + */ +#define KVM_SREGS_E_IVOR (1 << 5) + +/* + * Contains MAS0-4, MAS6-7, TLBnCFG, MMUCFG. + * Also TLBnPS if MMUCFG[MAVN] = 1. + */ +#define KVM_SREGS_E_ARCH206_MMU (1 << 6) + +/* DBSR, DBCR, IAC, DAC, DVC */ +#define KVM_SREGS_E_DEBUG (1 << 7) + +/* Enhanced debug -- DSRR0/1, SPRG9 */ +#define KVM_SREGS_E_ED (1 << 8) + +/* Embedded Floating Point (SPE) -- IVOR32-34 if KVM_SREGS_E_IVOR */ +#define KVM_SREGS_E_SPE (1 << 9) + +/* + * DEPRECATED! USE ONE_REG FOR THIS ONE! + * External Proxy (EXP) -- EPR + */ +#define KVM_SREGS_EXP (1 << 10) + +/* External PID (E.PD) -- EPSC/EPLC */ +#define KVM_SREGS_E_PD (1 << 11) + +/* Processor Control (E.PC) -- IVOR36-37 if KVM_SREGS_E_IVOR */ +#define KVM_SREGS_E_PC (1 << 12) + +/* Page table (E.PT) -- EPTCFG */ +#define KVM_SREGS_E_PT (1 << 13) + +/* Embedded Performance Monitor (E.PM) -- IVOR35 if KVM_SREGS_E_IVOR */ +#define KVM_SREGS_E_PM (1 << 14) + +/* + * Special updates: + * + * Some registers may change even while a vcpu is not running. + * To avoid losing these changes, by default these registers are + * not updated by KVM_SET_SREGS. To force an update, set the bit + * in u.e.update_special corresponding to the register to be updated. + * + * The update_special field is zero on return from KVM_GET_SREGS. + * + * When restoring a checkpoint, the caller can set update_special + * to 0xffffffff to ensure that everything is restored, even new features + * that the caller doesn't know about. + */ +#define KVM_SREGS_E_UPDATE_MCSR (1 << 0) +#define KVM_SREGS_E_UPDATE_TSR (1 << 1) +#define KVM_SREGS_E_UPDATE_DEC (1 << 2) +#define KVM_SREGS_E_UPDATE_DBSR (1 << 3) + +/* + * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a + * previous KVM_GET_REGS. + * + * Unless otherwise indicated, setting any register with KVM_SET_SREGS + * directly sets its value. It does not trigger any special semantics such + * as write-one-to-clear. Calling KVM_SET_SREGS on an unmodified struct + * just received from KVM_GET_SREGS is always a no-op. + */ +struct kvm_sregs { + __u32 pvr; + union { + struct { + __u64 sdr1; + struct { + struct { + __u64 slbe; + __u64 slbv; + } slb[64]; + } ppc64; + struct { + __u32 sr[16]; + __u64 ibat[8]; + __u64 dbat[8]; + } ppc32; + } s; + struct { + union { + struct { /* KVM_SREGS_E_IMPL_FSL */ + __u32 features; /* KVM_SREGS_E_FSL_ */ + __u32 svr; + __u64 mcar; + __u32 hid0; + + /* KVM_SREGS_E_FSL_PIDn */ + __u32 pid1, pid2; + } fsl; + __u8 pad[256]; + } impl; + + __u32 features; /* KVM_SREGS_E_ */ + __u32 impl_id; /* KVM_SREGS_E_IMPL_ */ + __u32 update_special; /* KVM_SREGS_E_UPDATE_ */ + __u32 pir; /* read-only */ + __u64 sprg8; + __u64 sprg9; /* E.ED */ + __u64 csrr0; + __u64 dsrr0; /* E.ED */ + __u64 mcsrr0; + __u32 csrr1; + __u32 dsrr1; /* E.ED */ + __u32 mcsrr1; + __u32 esr; + __u64 dear; + __u64 ivpr; + __u64 mcivpr; + __u64 mcsr; /* KVM_SREGS_E_UPDATE_MCSR */ + + __u32 tsr; /* KVM_SREGS_E_UPDATE_TSR */ + __u32 tcr; + __u32 decar; + __u32 dec; /* KVM_SREGS_E_UPDATE_DEC */ + + /* + * Userspace can read TB directly, but the + * value reported here is consistent with "dec". + * + * Read-only. + */ + __u64 tb; + + __u32 dbsr; /* KVM_SREGS_E_UPDATE_DBSR */ + __u32 dbcr[3]; + /* + * iac/dac registers are 64bit wide, while this API + * interface provides only lower 32 bits on 64 bit + * processors. ONE_REG interface is added for 64bit + * iac/dac registers. + */ + __u32 iac[4]; + __u32 dac[2]; + __u32 dvc[2]; + __u8 num_iac; /* read-only */ + __u8 num_dac; /* read-only */ + __u8 num_dvc; /* read-only */ + __u8 pad; + + __u32 epr; /* EXP */ + __u32 vrsave; /* a.k.a. USPRG0 */ + __u32 epcr; /* KVM_SREGS_E_64 */ + + __u32 mas0; + __u32 mas1; + __u64 mas2; + __u64 mas7_3; + __u32 mas4; + __u32 mas6; + + __u32 ivor_low[16]; /* IVOR0-15 */ + __u32 ivor_high[18]; /* IVOR32+, plus room to expand */ + + __u32 mmucfg; /* read-only */ + __u32 eptcfg; /* E.PT, read-only */ + __u32 tlbcfg[4];/* read-only */ + __u32 tlbps[4]; /* read-only */ + + __u32 eplc, epsc; /* E.PD */ + } e; + __u8 pad[1020]; + } u; +}; + +struct kvm_fpu { + __u64 fpr[32]; +}; + +/* + * Defines for h/w breakpoint, watchpoint (read, write or both) and + * software breakpoint. + * These are used as "type" in KVM_SET_GUEST_DEBUG ioctl and "status" + * for KVM_DEBUG_EXIT. + */ +#define KVMPPC_DEBUG_NONE 0x0 +#define KVMPPC_DEBUG_BREAKPOINT (1UL << 1) +#define KVMPPC_DEBUG_WATCH_WRITE (1UL << 2) +#define KVMPPC_DEBUG_WATCH_READ (1UL << 3) +struct kvm_debug_exit_arch { + __u64 address; + /* + * exiting to userspace because of h/w breakpoint, watchpoint + * (read, write or both) and software breakpoint. + */ + __u32 status; + __u32 reserved; +}; + +/* for KVM_SET_GUEST_DEBUG */ +struct kvm_guest_debug_arch { + struct { + /* H/W breakpoint/watchpoint address */ + __u64 addr; + /* + * Type denotes h/w breakpoint, read watchpoint, write + * watchpoint or watchpoint (both read and write). + */ + __u32 type; + __u32 reserved; + } bp[16]; +}; + +/* Debug related defines */ +/* + * kvm_guest_debug->control is a 32 bit field. The lower 16 bits are generic + * and upper 16 bits are architecture specific. Architecture specific defines + * that ioctl is for setting hardware breakpoint or software breakpoint. + */ +#define KVM_GUESTDBG_USE_SW_BP 0x00010000 +#define KVM_GUEST |