diff options
75 files changed, 436 insertions, 223 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 548892c08c59..7da578d72123 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -7,7 +7,7 @@ as "armctrl" in the SoC documentation, hence naming of this binding. Required properties: -- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- compatible : should be "brcm,bcm2835-armctrl-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt index 2de21c2acf55..844bd5fbd04c 100644 --- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -7,7 +7,7 @@ free running counter values, and generates an interrupt. Required properties: -- compatible : should be "brcm,bcm2835-system-timer.txt" +- compatible : should be "brcm,bcm2835-system-timer" - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupt sinks; one per timer channel. - clock-frequency : The frequency of the clock that drives the counter, in Hz. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e40eefb5d32d..767aae8277fa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -494,7 +494,6 @@ config ARCH_IOP32X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -508,7 +507,6 @@ config ARCH_IOP33X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -1772,6 +1770,7 @@ source "mm/Kconfig" config FORCE_MAX_ZONEORDER int "Maximum zone order" if ARCH_SHMOBILE range 11 64 if ARCH_SHMOBILE + default "12" if SOC_AM33XX default "9" if SA1111 default "11" help diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 29f541f0e653..c1ce813fcc4a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,14 +25,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb -dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ - imx53-ard.dtb \ - imx53-evk.dtb \ - imx53-qsb.dtb \ - imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ @@ -76,7 +68,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-pandaES.dtb \ omap4-var_som.dtb \ omap4-sdp.dtb \ - omap5-evm.dtb + omap5-evm.dtb \ + am335x-evm.dtb \ + am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ @@ -104,5 +98,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb \ xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ + wm8505-ref.dtb \ + wm8650-mid.dtb endif diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 20b966ee1bb3..e8f927cbb376 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -59,6 +59,41 @@ }; }; +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -137,3 +172,15 @@ cs1-used; device-handle = <&elpida_ECB240ABACN>; }; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 94a23b39033d..5b7e04fbff50 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -117,6 +117,15 @@ }; &omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ @@ -141,6 +150,50 @@ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ >; }; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */ + 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */ + 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */ + 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */ + 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ + >; + }; }; &i2c1 { @@ -349,3 +402,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 9c41a3f311aa..c663eba73168 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -27,6 +27,60 @@ }; +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */ + 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */ + 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */ + 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */ + 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */ + 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */ + 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */ + 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */ + 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */ + 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */ + 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ + >; + }; +}; + &mmc1 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; @@ -82,3 +136,7 @@ 0x020700d9>; /* SEARCH */ linux,input-no-autorepeat; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5db33f481a33..42c78beb4fdc 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,23 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + omap5_pmx_core: pinmux@4a002840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a002840 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap5_pmx_wkup: pinmux@4ae0c840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4ae0c840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e60dc7124e92..f0ba901676ac 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -539,7 +539,7 @@ nvidia,invert-interrupt; }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 67a6cd910b96..f3a09d0d45bc 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -170,7 +170,7 @@ reg = <0x7000e400 0x400>; }; - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -183,7 +183,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c4110d1b1f2d..001f4913799c 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -284,11 +284,17 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { - it8152_io.start = IT8152_IO_BASE + 0x12000; - it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000; + /* + * FIXME: use pci_ioremap_io to remap the IO space here and + * move over to the generic io.h implementation. + * This requires solving the same problem for PXA PCMCIA + * support. + */ + it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; + it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; sys->mem_offset = 0x10000000; - sys->io_offset = IT8152_IO_BASE; + sys->io_offset = (unsigned long)IT8152_IO_BASE; if (request_resource(&ioport_resource, &it8152_io)) { printk(KERN_ERR "PCI: unable to allocate IO region\n"); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2c2d86505a54..5315f05896e9 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void) } } -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS)) + return 1; + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ for (i = 0; i < 4; i++) { u32 css; @@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void) return 0; } } -#endif return 1; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e6f52de1062f..da9881b161e1 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -87,7 +87,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) iotable_init(desc, 1); } -static struct map_desc at91_io_desc __initdata = { +static struct map_desc at91_io_desc __initdata __maybe_unused = { .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6676dee7104e..e517e1036b09 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -939,7 +939,7 @@ static struct platform_device da850_cpufreq_device = { unsigned int da850_max_speed = 300000; -int __init da850_register_cpufreq(char *async_clk) +int da850_register_cpufreq(char *async_clk) { int i; diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h index 400551e43e4e..61c714c4920e 100644 --- a/arch/arm/mach-footbridge/include/mach/irqs.h +++ b/arch/arm/mach-footbridge/include/mach/irqs.h @@ -89,8 +89,6 @@ #define IRQ_NETWINDER_VGA _ISA_IRQ(11) #define IRQ_NETWINDER_SOUND _ISA_IRQ(12) -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM #define I8042_KBD_IRQ IRQ_ISA_KEYBOARD #define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) #define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1a78692e32a4..202e6a57f100 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -3,7 +3,7 @@ */ void cm_control(u32, u32); -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) +#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL) #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 4c0347526851..efeac5d0bc9e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,9 +324,9 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 +#define PCI_MEMORY_VADDR IOMEM(0xe8000000) +#define PCI_CONFIG_VADDR IOMEM(0xec000000) +#define PCI_V3_VADDR IOMEM(0xed000000) |