diff options
94 files changed, 3543 insertions, 3109 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4cbc6d8de210..62b9677c39a1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -47,6 +47,8 @@ config MIPS_ALCHEMY select GENERIC_GPIO select ARCH_WANT_OPTIONAL_GPIOLIB select SYS_SUPPORTS_ZBOOT + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI config AR7 bool "Texas Instruments AR7" @@ -206,6 +208,7 @@ config MACH_JZ4740 select SYS_HAS_EARLY_PRINTK select HAVE_PWM select HAVE_CLK + select GENERIC_IRQ_CHIP config LANTIQ bool "Lantiq based platforms" @@ -2092,7 +2095,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32 + depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON) default y help Enable hardware performance counter support for perf events. If diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 53e3514ba10e..9b4cb00407d7 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -226,7 +226,7 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \ egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ - sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/") + sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/") ifdef CONFIG_64BIT CHECKFLAGS += -m64 endif @@ -295,7 +295,9 @@ endif install: $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) +ifdef CONFIG_SYS_SUPPORTS_ZBOOT $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) +endif $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 2ccfd4a135bc..2a68be6a1b97 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -18,20 +18,20 @@ config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_BOSPORUS bool "Alchemy Bosporus board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_DB1000 bool "Alchemy DB1000 board" - select SOC_AU1000 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN @@ -39,14 +39,14 @@ config MIPS_DB1000 config MIPS_DB1100 bool "Alchemy DB1100 board" - select SOC_AU1100 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 bool "Alchemy DB1200 board" - select SOC_AU1200 + select ALCHEMY_GPIOINT_AU1000 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -54,7 +54,7 @@ config MIPS_DB1200 config MIPS_DB1500 bool "Alchemy DB1500 board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE @@ -64,7 +64,7 @@ config MIPS_DB1500 config MIPS_DB1550 bool "Alchemy DB1550 board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE @@ -74,13 +74,13 @@ config MIPS_DB1550 config MIPS_MIRAGE bool "Alchemy Mirage board" select DMA_NONCOHERENT - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_PB1000 bool "Alchemy PB1000 board" - select SOC_AU1000 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE @@ -89,7 +89,7 @@ config MIPS_PB1000 config MIPS_PB1100 bool "Alchemy PB1100 board" - select SOC_AU1100 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE @@ -98,7 +98,7 @@ config MIPS_PB1100 config MIPS_PB1200 bool "Alchemy PB1200 board" - select SOC_AU1200 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -106,7 +106,7 @@ config MIPS_PB1200 config MIPS_PB1500 bool "Alchemy PB1500 board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN @@ -114,7 +114,7 @@ config MIPS_PB1500 config MIPS_PB1550 bool "Alchemy PB1550 board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE @@ -124,13 +124,13 @@ config MIPS_PB1550 config MIPS_XXS1500 bool "MyCable XXS1500 board" select DMA_NONCOHERENT - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_GPR bool "Trapeze ITS GPR board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE @@ -138,23 +138,3 @@ config MIPS_GPR select SYS_HAS_EARLY_PRINTK endchoice - -config SOC_AU1000 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1100 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1500 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1550 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1200 - bool - select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 27811fe341d6..811ece7b22e3 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -12,9 +12,5 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) - ifeq ($(CONFIG_GPIOLIB),y) - obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o - endif + obj-$(CONFIG_GPIOLIB) += gpiolib.o endif - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 3a5abb54d505..0e63ee487d6d 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -40,8 +40,6 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - /* * The Descriptor Based DMA supports up to 16 channels. * @@ -62,120 +60,96 @@ static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); static int dbdma_initialized; -static dbdev_tab_t dbdev_tab[] = { -#ifdef CONFIG_SOC_AU1550 +static dbdev_tab_t *dbdev_tab; + +static dbdev_tab_t au1550_dbdev_tab[] __initdata = { /* UARTS */ - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, - { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, + { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, /* EXT DMA */ - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, /* USB DEV */ - { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, - { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, - { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, - { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, - { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, - { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, - - /* PSC 0 */ - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, - - /* PSC 1 */ - { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, - - /* PSC 2 */ - { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, - { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, - - /* PSC 3 */ - { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, - { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, - - { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ - { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ + { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, + + /* PSCs */ + { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, + + { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ + { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ /* MAC 0 */ - { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, /* MAC 1 */ - { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - -#endif /* CONFIG_SOC_AU1550 */ + { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, -#ifdef CONFIG_SOC_AU1200 - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, - { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, - - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; - { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +static dbdev_tab_t au1200_dbdev_tab[] __initdata = { + { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, - { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, - { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, - { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, - { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, + { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, - { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0 |