diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_bcm2835aux.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 6 |
3 files changed, 10 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ce8d4ffcc425..b2bdc35f7495 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -81,6 +81,9 @@ struct serial8250_config { #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: + * STOP PARITY EPAR SPAR WLEN5 WLEN6 + */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index e10f1244409b..a23c7da42ea8 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ spin_lock_init(&data->uart.port.lock); - data->uart.capabilities = UART_CAP_FIFO; + data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI; data->uart.port.dev = &pdev->dev; data->uart.port.regshift = 2; data->uart.port.type = PORT_16550; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index d5b6cee87801..b4e71380a13c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2584,6 +2584,12 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot, frac = 0; + if (up->capabilities & UART_CAP_MINI) { + termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); + if ((termios->c_cflag & CSIZE) == CS5 || + (termios->c_cflag & CSIZE) == CS6) + termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7; + } cval = serial8250_compute_lcr(up, termios->c_cflag); baud = serial8250_get_baud_rate(port, termios, old); |