diff options
61 files changed, 687 insertions, 184 deletions
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 24c5cdaba8d2..ca83dcc84fb8 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -20,6 +20,8 @@ Required properties: Optional properties: - phy-handle: See ethernet.txt file in the same directory. If absent, davinci_emac driver defaults to 100/FULL. +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - ti,davinci-rmii-en: 1 byte, 1 means use RMII - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM? diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index cfc376bc977a..a68621580584 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address; -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: - * "internal" + * "internal" (Internal means there is not a standard bus between the MAC and + the PHY, something proprietary is being used to embed the PHY in the MAC.) * "mii" * "gmii" * "sgmii" diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 174f292d8a3e..8b80515729d7 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -26,6 +26,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +Optional properties: +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used + Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt index e12a4900cf72..d192f8b9948b 100644 --- a/Documentation/networking/decnet.txt +++ b/Documentation/networking/decnet.txt @@ -22,8 +22,6 @@ you'll need the following options as well... CONFIG_DECNET_ROUTER (to be able to add/delete routes) CONFIG_NETFILTER (will be required for the DECnet routing daemon) - CONFIG_DECNET_ROUTE_FWMARK is optional - Don't turn on SIOCGIFCONF support for DECnet unless you are really sure that you need it, in general you won't and it can cause ifconfig to malfunction. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index acdfb5d2bcaa..e2142fe40cda 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -422,6 +422,7 @@ tcp_min_rtt_wlen - INTEGER minimum RTT when it is moved to a longer path (e.g., due to traffic engineering). A longer window makes the filter more resistant to RTT inflations such as transient congestion. The unit is seconds. + Possible values: 0 - 86400 (1 day) Default: 300 tcp_moderate_rcvbuf - BOOLEAN diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 11e1663bdc4d..b2c06da4f62e 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1646,7 +1646,7 @@ static irqreturn_t fs_irq (int irq, void *dev_id) } if (status & ISR_TBRQ_W) { - fs_dprintk (FS_DEBUG_IRQ, "Data tramsitted!\n"); + fs_dprintk (FS_DEBUG_IRQ, "Data transmitted!\n"); process_txdone_queue (dev, &dev->tx_relq); } diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 9e07b469066a..156fbc5601ca 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -1721,7 +1721,7 @@ static void atl1_inc_smb(struct atl1_adapter *adapter) adapter->soft_stats.scc += smb->tx_1_col; adapter->soft_stats.mcc += smb->tx_2_col; adapter->soft_stats.latecol += smb->tx_late_col; - adapter->soft_stats.tx_underun += smb->tx_underrun; + adapter->soft_stats.tx_underrun += smb->tx_underrun; adapter->soft_stats.tx_trunc += smb->tx_trunc; adapter->soft_stats.tx_pause += smb->tx_pause; @@ -3179,7 +3179,7 @@ static struct atl1_stats atl1_gstrings_stats[] = { {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, - {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, + {"tx_underrun", ATL1_STAT(soft_stats.tx_underrun)}, {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h index 34a58cd846a0..eacff19ea05b 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.h +++ b/drivers/net/ethernet/atheros/atlx/atl1.h @@ -681,7 +681,7 @@ struct atl1_sft_stats { u64 scc; /* packets TX after a single collision */ u64 mcc; /* packets TX after multiple collisions */ u64 latecol; /* TX packets w/ late collisions */ - u64 tx_underun; /* TX packets aborted due to TX FIFO underrun + u64 tx_underrun; /* TX packets aborted due to TX FIFO underrun * or TRD FIFO underrun */ u64 tx_trunc; /* TX packets truncated due to size > MTU */ u64 rx_pause; /* num Pause packets received. */ diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index d99317b3d891..98da0fa27192 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -553,7 +553,7 @@ static void atl2_intr_tx(struct atl2_adapter *adapter) netdev->stats.tx_aborted_errors++; if (txs->late_col) netdev->stats.tx_window_errors++; - if (txs->underun) + if (txs->underrun) netdev->stats.tx_fifo_errors++; } while (1); diff --git a/drivers/net/ethernet/atheros/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h index c64a6bdfa7ae..25ec84cb4853 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.h +++ b/drivers/net/ethernet/atheros/atlx/atl2.h @@ -260,7 +260,7 @@ struct tx_pkt_status { unsigned multi_col:1; unsigned late_col:1; unsigned abort_col:1; - unsigned underun:1; /* current packet is aborted + unsigned underrun:1; /* current packet is aborted * due to txram underrun */ unsigned:3; /* reserved */ unsigned update:1; /* always 1'b1 in tx_status_buf */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c index 03b2a9f9c589..cad34d6f5f45 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c @@ -33,6 +33,26 @@ #include <linux/bpf_trace.h> #include "en/xdp.h" +int mlx5e_xdp_max_mtu(struct mlx5e_params *params) +{ + int hr = NET_IP_ALIGN + XDP_PACKET_HEADROOM; + + /* Let S := SKB_DATA_ALIGN(sizeof(struct skb_shared_info)). + * The condition checked in mlx5e_rx_is_linear_skb is: + * SKB_DATA_ALIGN(sw_mtu + hard_mtu + hr) + S <= PAGE_SIZE (1) + * (Note that hw_mtu == sw_mtu + hard_mtu.) + * What is returned from this function is: + * max_mtu = PAGE_SIZE - S - hr - hard_mtu (2) + * After assigning sw_mtu := max_mtu, the left side of (1) turns to + * SKB_DATA_ALIGN(PAGE_SIZE - S) + S, which is equal to PAGE_SIZE, + * because both PAGE_SIZE and S are already aligned. Any number greater + * than max_mtu would make the left side of (1) greater than PAGE_SIZE, + * so max_mtu is the maximum MTU allowed. + */ + + return MLX5E_HW2SW_MTU(params, SKB_MAX_HEAD(hr)); +} + static inline bool mlx5e_xmit_xdp_buff(struct mlx5e_xdpsq *sq, struct mlx5e_dma_info *di, struct xdp_buff *xdp) @@ -304,9 +324,9 @@ bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq) mlx5e_xdpi_fifo_pop(xdpi_fifo); if (is_redirect) { - xdp_return_frame(xdpi.xdpf); dma_unmap_single(sq->pdev, xdpi.dma_addr, xdpi.xdpf->len, DMA_TO_DEVICE); + xdp_return_frame(xdpi.xdpf); } else { /* Recycle RX page */ mlx5e_page_release(rq, &xdpi.di, true); @@ -345,9 +365,9 @@ void mlx5e_free_xdpsq_descs(struct mlx5e_xdpsq *sq, struct mlx5e_rq *rq) mlx5e_xdpi_fifo_pop(xdpi_fifo); if (is_redirect) { - xdp_return_frame(xdpi.xdpf); dma_unmap_single(sq->pdev, xdpi.dma_addr, xdpi.xdpf->len, DMA_TO_DEVICE); + xdp_return_frame(xdpi.xdpf); } else { /* Recycle RX page */ mlx5e_page_release(rq, &xdpi.di, false); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h index ee27a7c8cd87..553956cadc8a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h @@ -34,13 +34,12 @@ #include "en.h" -#define MLX5E_XDP_MAX_MTU ((int)(PAGE_SIZE - \ - MLX5_SKB_FRAG_SZ(XDP_PACKET_HEADROOM))) #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) #define MLX5E_XDP_TX_EMPTY_DS_COUNT \ (sizeof(struct mlx5e_tx_wqe) / MLX5_SEND_WQE_DS) #define MLX5E_XDP_TX_DS_COUNT (MLX5E_XDP_TX_EMPTY_DS_COUNT + 1 /* SG DS */) +int mlx5e_xdp_max_mtu(struct mlx5e_params *params); bool mlx5e_xdp_handle(struct mlx5e_rq *rq, struct mlx5e_dma_info *di, void *va, u16 *rx_headroom, u32 *len); bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 76a3d01a489e..78dc8fe2a83c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1586,7 +1586,7 @@ static int mlx5e_get_module_info(struct net_device *netdev, break; case MLX5_MODULE_ID_SFP: modinfo->type = ETH_MODULE_SFF_8472; - modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + modinfo->eeprom_len = MLX5_EEPROM_PAGE_LENGTH; break; default: netdev_err(priv->netdev, "%s: cable type not recognized:0x%x\n", diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f7eb521db580..46157e2a1e5a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3777,7 +3777,7 @@ int mlx5e_change_mtu(struct net_device *netdev, int new_mtu, if (params->xdp_prog && !mlx5e_rx_is_linear_skb(priv->mdev, &new_channels.params)) { netdev_err(netdev, "MTU(%d) > %d is not allowed while XDP enabled\n", - new_mtu, MLX5E_XDP_MAX_MTU); + new_mtu, mlx5e_xdp_max_mtu(params)); err = -EINVAL; goto out; } @@ -4212,7 +4212,8 @@ static int mlx5e_xdp_allowed(struct mlx5e_priv *priv, struct bpf_prog *prog) if (!mlx5e_rx_is_linear_skb(priv->mdev, &new_channels.params)) { netdev_warn(netdev, "XDP is not allowed with MTU(%d) > %d\n", - new_channels.params.sw_mtu, MLX5E_XDP_MAX_MTU); + new_channels.params.sw_mtu, + mlx5e_xdp_max_mtu(&new_channels.params)); return -EINVAL; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 21b7f05b16a5..361468e0435d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -317,10 +317,6 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, size -= offset + size - MLX5_EEPROM_PAGE_LENGTH; i2c_addr = MLX5_I2C_ADDR_LOW; - if (offset >= MLX5_EEPROM_PAGE_LENGTH) { - i2c_addr = MLX5_I2C_ADDR_HIGH; - offset -= MLX5_EEPROM_PAGE_LENGTH; - } MLX5_SET(mcia_reg, in, l, 0); MLX5_SET(mcia_reg, in, module, module_num); diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h index ffee38e36ce8..8648ca171254 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h +++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h @@ -27,7 +27,7 @@ #define MLXSW_PCI_SW_RESET 0xF0010 #define MLXSW_PCI_SW_RESET_RST_BIT BIT(0) -#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 13000 +#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 20000 #define MLXSW_PCI_SW_RESET_WAIT_MSECS 100 #define MLXSW_PCI_FW_READY 0xA1844 #define MLXSW_PCI_FW_READY_MASK 0xFFFF diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 9eb63300c1d3..6b8aa3761899 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3126,11 +3126,11 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev, if (err) return err; + mlxsw_sp_port->link.autoneg = autoneg; + if (!netif_running(dev)) return 0; - mlxsw_sp_port->link.autoneg = autoneg; - mlxsw_sp_port_admin_status_set(mlxsw_sp_port, false); mlxsw_sp_port_admin_status_set(mlxsw_sp_port, true); @@ -3316,7 +3316,7 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port) err = mlxsw_sp_port_ets_set(mlxsw_sp_port, MLXSW_REG_QEEC_HIERARCY_TC, i + 8, i, - false, 0); + true, 100); if (err) return err; } diff --git a/drivers/net/ethernet/netronome/nfp/abm/cls.c b/drivers/net/ethernet/netronome/nfp/abm/cls.c index 9852080cf454..ff3913085665 100644 --- a/drivers/net/ethernet/netronome/nfp/abm/cls.c +++ b/drivers/net/ethernet/netronome/nfp/abm/cls.c @@ -39,7 +39,7 @@ nfp_abm_u32_check_knode(struct nfp_abm *abm, struct tc_cls_u32_knode *knode, } if (knode->sel->off || knode->sel->offshift || knode->sel->offmask || knode->sel->offoff || knode->fshift) { - NL_SET_ERR_MSG_MOD(extack, "variable offseting not supported"); + NL_SET_ERR_MSG_MOD(extack, "variable offsetting not supported"); return false; } if (knode->sel->hoff || knode->sel->hmask) { @@ -78,7 +78,7 @@ nfp_abm_u32_check_knode(struct nfp_abm *abm, struct tc_cls_u32_knode *knode, k = &knode->sel->keys[0]; if (k->offmask) { - NL_SET_ERR_MSG_MOD(extack, "offset mask - variable offseting not supported"); + NL_SET_ERR_MSG_MOD(extack, "offset mask - variable offsetting not supported"); return false; } if (k->off) { diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index a18149720aa2..cba5881b2746 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -673,7 +673,8 @@ static void netsec_process_tx(struct netsec_priv *priv) } static void *netsec_alloc_rx_data(struct netsec_priv *priv, - dma_addr_t *dma_handle, u16 *desc_len) + dma_addr_t *dma_handle, u16 *desc_len, + bool napi) { size_t total_len = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); size_t payload_len = NETSEC_RX_BUF_SZ; @@ -682,7 +683,7 @@ static void *netsec_alloc_rx_data(struct netsec_priv *priv, total_len += SKB_DATA_ALIGN(payload_len + NETSEC_SKB_PAD); - buf = napi_alloc_frag(total_len); + buf = napi ? napi_alloc_frag(total_len) : netdev_alloc_frag(total_len); if (!buf) return NULL; @@ -765,7 +766,8 @@ static int netsec_process_rx(struct netsec_priv *priv, int budget) /* allocate a fresh buffer and map it to the hardware. * This will eventually replace the old buffer in the hardware */ - buf_addr = netsec_alloc_rx_data(priv, &dma_handle, &desc_len); + buf_addr = netsec_alloc_rx_data(priv, &dma_handle, &desc_len, + true); if (unlikely(!buf_addr)) break; @@ -1069,7 +1071,8 @@ static int netsec_setup_rx_dring(struct netsec_priv *priv) void *buf; u16 len; - buf = netsec_alloc_rx_data(priv, &dma_handle, &len); + buf = netsec_alloc_rx_data(priv, &dma_handle, &len, + false); if (!buf) { netsec_uninit_pkt_dring(priv, NETSEC_RING_RX); goto err_out; diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c index b7dd4e3c760d..6d690678c20e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c @@ -140,7 +140,7 @@ static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, p->des0 |= cpu_to_le32(RDES0_OWN); bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1); - p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK); + p->des1 |= cpu_to_le32(bfsize1 & RDES1_BUFFER1_SIZE_MASK); if (mode == STMMAC_CHAIN_MODE) ndesc_rx_set_on_chain(p, end); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a26e36dbb5df..48712437d0da 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2616,8 +2616,6 @@ static int stmmac_open(struct net_device *dev) u32 chan; int ret; - stmmac_check_ether_addr(priv); - if (priv->hw->pcs != STMMAC_PCS_RGMII && priv->hw->pcs != STMMAC_PCS_TBI && priv->hw->pcs != STMMAC_PCS_RTBI) { @@ -4303,6 +4301,8 @@ int stmmac_dvr_probe(struct device *device, if (ret) goto error_hw_init; + stmmac_check_ether_addr(priv); + /* Configure real RX and TX queues */ netif_set_real_num_rx_queues(ndev, priv->plat->rx_queues_to_use); netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index d819e8eaba12..cc1e887e47b5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -159,6 +159,12 @@ static const struct dmi_system_id quark_pci_dmi[] = { }, .driver_data = (void *)&galileo_stmmac_dmi_data, }, + /* + * There are 2 types of SIMATIC IOT2000: IOT20202 and IOT2040. + * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which + * has only one pci network device while other asset tags are + * for IOT2040 which has two. + */ { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), @@ -170,8 +176,6 @@ static const struct dmi_system_id quark_pci_dmi[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, - "6ES7647-0AA00-1YA2"), }, .driver_data = (void *)&iot2040_stmmac_dmi_data, }, diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index 92b64e254b44..7475cef17cf7 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -159,6 +159,14 @@ static const struct spi_device_id ks8995_id[] = { }; MODULE_DEVICE_TABLE(spi, ks8995_id); +static const struct of_device_id ks8895_spi_of_match[] = { + { .compatible = "micrel,ks8995" }, + { .compatible = "micrel,ksz8864" }, + { .compatible = "micrel,ksz8795" }, + { }, + }; +MODULE_DEVICE_TABLE(of, ks8895_spi_of_match); + static inline u8 get_chip_id(u8 val) { return (val >> ID1_CHIPID_S) & ID1_CHIPID_M; @@ -526,6 +534,7 @@ static int ks8995_remove(struct spi_device *spi) static struct spi_driver ks8995_driver = { .driver = { .name = "spi-ks8995", + .of_match_table = of_match_ptr(ks8895_spi_of_match), }, .probe = ks8995_probe, .remove = ks8995_remove, diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 9ce61b019aad..16963f7a88f7 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1156,6 +1156,13 @@ static int team_port_add(struct team *team, struct net_device *port_dev, return -EINVAL; } + if (netdev_has_upper_dev(dev, port_dev)) { + NL_SET_ERR_MSG(extack, "Device is already an upper device of the team interface" |