diff options
34 files changed, 405 insertions, 283 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt deleted file mode 100644 index f1487a751b1a..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ /dev/null @@ -1,149 +0,0 @@ -Broadcom BCM53xx Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of: "brcm,bcm5325" - "brcm,bcm53115" - "brcm,bcm53125" - "brcm,bcm53128" - "brcm,bcm5365" - "brcm,bcm5395" - "brcm,bcm5389" - "brcm,bcm5397" - "brcm,bcm5398" - - For the BCM11360 SoC, must be: - "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string - - For the BCM5310x SoCs with an integrated switch, must be one of: - "brcm,bcm53010-srab" - "brcm,bcm53011-srab" - "brcm,bcm53012-srab" - "brcm,bcm53018-srab" - "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string - - For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of: - "brcm,bcm11404-srab" - "brcm,bcm11407-srab" - "brcm,bcm11409-srab" - "brcm,bcm58310-srab" - "brcm,bcm58311-srab" - "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string - - For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of: - "brcm,bcm58522-srab" - "brcm,bcm58523-srab" - "brcm,bcm58525-srab" - "brcm,bcm58622-srab" - "brcm,bcm58623-srab" - "brcm,bcm58625-srab" - "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string - - For the BCM63xx/33xx SoCs with an integrated switch, must be one of: - "brcm,bcm3384-switch" - "brcm,bcm6328-switch" - "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" - -Required properties for BCM585xx/586xx/88312 SoCs: - - - reg: a total of 3 register base addresses, the first one must be the - Switch Register Access block base, the second is the port 5/4 mux - configuration register and the third one is the SGMII configuration - and status register base address. - - - interrupts: a total of 13 interrupts must be specified, in the following - order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, - then the timestamping interrupt and the sleep timer interrupts for ports - 5,7,8. - -Optional properties for BCM585xx/586xx/88312 SoCs: - - - reg-names: a total of 3 names matching the 3 base register address, must - be in the following order: - "srab" - "mux_config" - "sgmii_config" - - - interrupt-names: a total of 13 names matching the 13 interrupts specified - must be in the following order: - "link_state_p0" - "link_state_p1" - "link_state_p2" - "link_state_p3" - "link_state_p4" - "link_state_p5" - "link_state_p7" - "link_state_p8" - "phy" - "ts" - "imp_sleep_timer_p5" - "imp_sleep_timer_p7" - "imp_sleep_timer_p8" - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via MDIO to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - compatible = "brcm,unimac"; - reg = <0x10001000 0x1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio0: mdio@10000000 { - compatible = "brcm,unimac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - switch0: ethernet-switch@1e { - compatible = "brcm,bcm53125"; - reg = <30>; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port0@0 { - reg = <0>; - label = "lan1"; - }; - - port1@1 { - reg = <1>; - label = "lan2"; - }; - - port5@5 { - reg = <5>; - label = "cable-modem"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - }; - - port8@8 { - reg = <8>; - label = "cpu"; - fixed-link { - speed = <1000>; - full-duplex; - }; - phy-mode = "rgmii-txid"; - ethernet = <ð0>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml new file mode 100644 index 000000000000..c3c938893ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53xx Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +description: + Broadcom BCM53xx Ethernet switches + +properties: + compatible: + oneOf: + - const: brcm,bcm5325 + - const: brcm,bcm53115 + - const: brcm,bcm53125 + - const: brcm,bcm53128 + - const: brcm,bcm5365 + - const: brcm,bcm5395 + - const: brcm,bcm5389 + - const: brcm,bcm5397 + - const: brcm,bcm5398 + - items: + - const: brcm,bcm11360-srab + - const: brcm,cygnus-srab + - items: + - enum: + - brcm,bcm53010-srab + - brcm,bcm53011-srab + - brcm,bcm53012-srab + - brcm,bcm53018-srab + - brcm,bcm53019-srab + - const: brcm,bcm5301x-srab + - items: + - enum: + - brcm,bcm11404-srab + - brcm,bcm11407-srab + - brcm,bcm11409-srab + - brcm,bcm58310-srab + - brcm,bcm58311-srab + - brcm,bcm58313-srab + - const: brcm,omega-srab + - items: + - enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + - const: brcm,nsp-srab + - items: + - enum: + - brcm,bcm3384-switch + - brcm,bcm6328-switch + - brcm,bcm6368-switch + - const: brcm,bcm63xx-switch + +required: + - compatible + - reg + +# BCM585xx/586xx/88312 SoCs +if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab +then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts +else: + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "cable-modem"; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + label = "cpu"; + phy-mode = "rgmii-txid"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + axi { + #address-cells = <1>; + #size-cells = <1>; + + switch@36000 { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index a765ceba28c6..8e044631bcf7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -20,7 +20,7 @@ select: false properties: $nodename: - pattern: "^switch(@.*)?$" + pattern: "^(ethernet-)?switch(@.*)?$" dsa,member: minItems: 2 @@ -78,6 +78,10 @@ patternProperties: mac-address: true + sfp: true + + managed: true + required: - reg diff --git a/MAINTAINERS b/MAINTAINERS index 3da6d8c154e4..ae78b54d4a4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3377,7 +3377,7 @@ M: Florian Fainelli <f.fainelli@gmail.com> L: netdev@vger.kernel.org L: openwrt-devel@lists.openwrt.org (subscribers-only) S: Supported -F: Documentation/devicetree/bindings/net/dsa/b53.txt +F: Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml F: drivers/net/dsa/b53/* F: include/linux/platform_data/b53.h diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index dacaef2c14ca..0025c88f660c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -591,7 +591,6 @@ adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; - io-channel-ranges; adc-syscon = <&ts_adc_syscon>; clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; clock-names = "tsc_clk"; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index e895f7cb8c9f..b4d2cc70afb1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -385,12 +385,12 @@ clock-names = "apb_pclk"; }; - srab: srab@36000 { + srab: ethernet-switch@36000 { compatible = "brcm,nsp-srab"; reg = <0x36000 0x1000>, <0x3f308 0x8>, <0x3f410 0xc>; - reg-names = "srab", "mux_config", "sgmii"; + reg-names = "srab", "mux_config", "sgmii_config"; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, @@ -420,6 +420,10 @@ status = "disabled"; /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; i2c0: i2c@38000 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 09a1182c2936..403bacf986eb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -181,12 +181,14 @@ &hdmi0 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; &hdmi1 { clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index e2fd9610e125..20322de2f8bf 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 0ff0e9e25327..1409d1b559c1 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <256>; + g-rx-fifo-size = <558>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 810fc32f1895..5b4a481be4f4 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 7604b4480bb1..8636600385fd 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,17 +64,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index abd35a518046..51c64f0b2560 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -122,9 +122,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 4dcec6865469..2f2d2b0a6893 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,7 +117,3 @@ }; }; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 1ec655809e57..68aaf0af3945 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,17 +57,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@4 { reg = <4>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 04bfd58127fc..432254383769 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,17 +105,10 @@ status = "okay"; }; -&usb3_phy { - status = "okay"; -}; - &srab { status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 01c390ed48ea..12e34a0439b4 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -126,7 +126,3 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; - -&usb3_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index e1bb8661955f..cba3d910bed8 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -9,3 +9,7 @@ clock-frequency = <125000000>; status = "okay"; }; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 0faae8950375..3725f2b0d60b 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -123,33 +123,13 @@ }; }; - mdio-bus-mux { - #address-cells = <1>; - #size-cells = <0>; + mdio-bus-mux@18003000 { /* BIT(9) = 1 => external mdio */ - mdio_ext: mdio@200 { + mdio@200 { reg = <0x200>; #address-cells = <1>; #size-cells = <0>; - }; - }; - - mdio-mii-mux { - compatible = "mdio-mux-mmioreg"; - mdio-parent-bus = <&mdio_ext>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1800c1c0 0x4>; - - /* BIT(6) = mdc, BIT(7) = mdio */ - mux-mask = <0xc0>; - - mdio-mii@0 { - /* Enable MII function */ - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; switch@0 { compatible = "brcm,bcm53125"; @@ -159,6 +139,8 @@ reset-names = "robo_reset"; reg = <0>; dsa,member = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_mdio>; ports { #address-cells = <1>; @@ -219,9 +201,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; label = "lan7"; @@ -242,6 +221,30 @@ label = "wan"; }; + port@5 { + reg = <5>; + ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@8 { reg = <8>; ethernet = <&gmac2>; @@ -268,3 +271,44 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x080000 0x0100000>; + }; + + partition@180000{ + label = "devinfo"; + reg = <0x0180000 0x080000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x0200000 0x01D00000>; + compatible = "brcm,trx"; + }; + + partition@1F00000 { + label = "failsafe"; + reg = <0x01F00000 0x01D00000>; + read-only; + }; + + partition@5200000 { + label = "system"; + reg = <0x05200000 0x02E00000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 068e384b8ab7..6fa101f0a90d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -59,9 +59,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "poe"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 9ae815ddbb4b..4f8d777ae18d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -57,9 +57,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index a21b2d185596..e17e9a17fb00 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -108,9 +108,6 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 4d5c5aa7dc42..60cc87ecc7ec 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -71,6 +71,10 @@ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; +&usb3_phy { + status = "okay"; +}; + &spi_nor { status = "okay"; }; @@ -79,9 +83,6 @@ |