diff options
-rw-r--r-- | drivers/net/dsa/microchip/Kconfig | 4 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/Makefile | 3 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 1316 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz9477_spi.c | 143 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 1170 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 214 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_priv.h | 226 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_spi.h | 69 |
8 files changed, 1903 insertions, 1242 deletions
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 4e25fe4d7979..a8caf9249d50 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -1,7 +1,11 @@ +config NET_DSA_MICROCHIP_KSZ_COMMON + tristate + menuconfig NET_DSA_MICROCHIP_KSZ9477 tristate "Microchip KSZ9477 series switch support" depends on NET_DSA select NET_DSA_TAG_KSZ + select NET_DSA_MICROCHIP_KSZ_COMMON help This driver adds support for Microchip KSZ9477 switch chips. diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 9393e73e8c97..3142c18b8f57 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -1,2 +1,3 @@ -obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz_common.o +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c new file mode 100644 index 000000000000..80df6c03b340 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -0,0 +1,1316 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ9477 switch driver main logic + * + * Copyright (C) 2017-2018 Microchip Technology Inc. + */ + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <net/dsa.h> +#include <net/switchdev.h> + +#include "ksz_priv.h" +#include "ksz_common.h" +#include "ksz_9477_reg.h" + +static const struct { + int index; + char string[ETH_GSTRING_LEN]; +} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = { + { 0x00, "rx_hi" }, + { 0x01, "rx_undersize" }, + { 0x02, "rx_fragments" }, + { 0x03, "rx_oversize" }, + { 0x04, "rx_jabbers" }, + { 0x05, "rx_symbol_err" }, + { 0x06, "rx_crc_err" }, + { 0x07, "rx_align_err" }, + { 0x08, "rx_mac_ctrl" }, + { 0x09, "rx_pause" }, + { 0x0A, "rx_bcast" }, + { 0x0B, "rx_mcast" }, + { 0x0C, "rx_ucast" }, + { 0x0D, "rx_64_or_less" }, + { 0x0E, "rx_65_127" }, + { 0x0F, "rx_128_255" }, + { 0x10, "rx_256_511" }, + { 0x11, "rx_512_1023" }, + { 0x12, "rx_1024_1522" }, + { 0x13, "rx_1523_2000" }, + { 0x14, "rx_2001" }, + { 0x15, "tx_hi" }, + { 0x16, "tx_late_col" }, + { 0x17, "tx_pause" }, + { 0x18, "tx_bcast" }, + { 0x19, "tx_mcast" }, + { 0x1A, "tx_ucast" }, + { 0x1B, "tx_deferred" }, + { 0x1C, "tx_total_col" }, + { 0x1D, "tx_exc_col" }, + { 0x1E, "tx_single_col" }, + { 0x1F, "tx_mult_col" }, + { 0x80, "rx_total" }, + { 0x81, "tx_total" }, + { 0x82, "rx_discards" }, + { 0x83, "tx_discards" }, +}; + +static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) +{ + u32 data; + + ksz_read32(dev, addr, &data); + if (set) + data |= bits; + else + data &= ~bits; + ksz_write32(dev, addr, data); +} + +static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, + u32 bits, bool set) +{ + u32 addr; + u32 data; + + addr = PORT_CTRL_ADDR(port, offset); + ksz_read32(dev, addr, &data); + + if (set) + data |= bits; + else + data &= ~bits; + + ksz_write32(dev, addr, data); +} + +static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, + int timeout) +{ + u8 data; + + do { + ksz_read8(dev, REG_SW_VLAN_CTRL, &data); + if (!(data & waiton)) + break; + usleep_range(1, 10); + } while (timeout-- > 0); + + if (timeout <= 0) + return -ETIMEDOUT; + + return 0; +} + +static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid, + u32 *vlan_table) +{ + int ret; + + mutex_lock(&dev->vlan_mutex); + + ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); + ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); + + /* wait to be cleared */ + ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000); + if (ret < 0) { + dev_dbg(dev->dev, "Failed to read vlan table\n"); + goto exit; + } + + ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); + ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); + ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); + + ksz_write8(dev, REG_SW_VLAN_CTRL, 0); + +exit: + mutex_unlock(&dev->vlan_mutex); + + return ret; +} + +static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid, + u32 *vlan_table) +{ + int ret; + + mutex_lock(&dev->vlan_mutex); + + ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); + ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); + ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); + + ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); + ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); + + /* wait to be cleared */ + ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000); + if (ret < 0) { + dev_dbg(dev->dev, "Failed to write vlan table\n"); + goto exit; + } + + ksz_write8(dev, REG_SW_VLAN_CTRL, 0); + + /* update vlan cache table */ + dev->vlan_cache[vid].table[0] = vlan_table[0]; + dev->vlan_cache[vid].table[1] = vlan_table[1]; + dev->vlan_cache[vid].table[2] = vlan_table[2]; + +exit: + mutex_unlock(&dev->vlan_mutex); + + return ret; +} + +static void ksz9477_read_table(struct ksz_device *dev, u32 *table) +{ + ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); + ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); + ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); + ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); +} + +static void ksz9477_write_table(struct ksz_device *dev, u32 *table) +{ + ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); + ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); + ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); + ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); +} + +static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton, + int timeout) +{ + u32 data; + + do { + ksz_read32(dev, REG_SW_ALU_CTRL__4, &data); + if (!(data & waiton)) + break; + usleep_range(1, 10); + } while (timeout-- > 0); + + if (timeout <= 0) + return -ETIMEDOUT; + + return 0; +} + +static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, + int timeout) +{ + u32 data; + + do { + ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data); + if (!(data & waiton)) + break; + usleep_range(1, 10); + } while (timeout-- > 0); + + if (timeout <= 0) + return -ETIMEDOUT; + + return 0; +} + +static int ksz9477_reset_switch(struct ksz_device *dev) +{ + u8 data8; + u16 data16; + u32 data32; + + /* reset switch */ + ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + + /* turn off SPI DO Edge select */ + ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); + data8 &= ~SPI_AUTO_EDGE_DETECTION; + ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); + + /* default configuration */ + ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); + data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | + SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; + ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + + /* disable interrupts */ + ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); + ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); + + /* set broadcast storm protection 10% rate */ + ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16); + data16 &= ~BROADCAST_STORM_RATE; + data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; + ksz_write16(dev, REG_SW_MAC_CTRL_2, data16); + + return 0; +} + +static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + return DSA_TAG_PROTO_KSZ; +} + +static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct ksz_device *dev = ds->priv; + u16 val = 0xffff; + + /* No real PHY after this. Simulate the PHY. + * A fixed PHY can be setup in the device tree, but this function is + * still called for that port during initialization. + * For RGMII PHY there is no way to access it so the fixed PHY should + * be used. For SGMII PHY the supporting code will be added later. + */ + if (addr >= dev->phy_port_cnt) { + struct ksz_port *p = &dev->ports[addr]; + + switch (reg) { + case MII_BMCR: + val = 0x1140; + break; + case MII_BMSR: + val = 0x796d; + break; + case MII_PHYSID1: + val = 0x0022; + break; + case MII_PHYSID2: + val = 0x1631; + break; + case MII_ADVERTISE: + val = 0x05e1; + break; + case MII_LPA: + val = 0xc5e1; + break; + case MII_CTRL1000: + val = 0x0700; + break; + case MII_STAT1000: + if (p->phydev.speed == SPEED_1000) + val = 0x3800; + else + val = 0; + break; + } + } else { + ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); + } + + return val; +} + +static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg, + u16 val) +{ + struct ksz_device *dev = ds->priv; + + /* No real PHY after this. */ + if (addr >= dev->phy_port_cnt) + return 0; + ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + + return 0; +} + +static void ksz9477_get_strings(struct dsa_switch *ds, int port, + u32 stringset, uint8_t *buf) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { + memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string, + ETH_GSTRING_LEN); + } +} + +static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *buf) +{ + struct ksz_device *dev = ds->priv; + int i; + u32 data; + int timeout; + + mutex_lock(&dev->stats_mutex); + + for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { + data = MIB_COUNTER_READ; + data |= ((ksz9477_mib_names[i].index & 0xFF) << + MIB_COUNTER_INDEX_S); + ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); + + timeout = 1000; + do { + ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4, + &data); + usleep_range(1, 10); + if (!(data & MIB_COUNTER_READ)) + break; + } while (timeout-- > 0); + + /* failed to read MIB. get out of loop */ + if (!timeout) { + dev_dbg(dev->dev, "Failed to get MIB\n"); + break; + } + + /* count resets upon read */ + ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); + + dev->mib_value[i] += (uint64_t)data; + buf[i] = dev->mib_value[i]; + } + + mutex_unlock(&dev->stats_mutex); +} + +static void ksz9477_cfg_port_member(struct ksz_device *dev, int port, + u8 member) +{ + ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); + dev->ports[port].member = member; +} + +static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p = &dev->ports[port]; + u8 data; + int member = -1; + + ksz_pread8(dev, port, P_STP_CTRL, &data); + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + + switch (state) { + case BR_STATE_DISABLED: + data |= PORT_LEARN_DISABLE; + if (port != dev->cpu_port) + member = 0; + break; + case BR_STATE_LISTENING: + data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); + if (port != dev->cpu_port && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + case BR_STATE_LEARNING: + data |= PORT_RX_ENABLE; + break; + case BR_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + + /* This function is also used internally. */ + if (port == dev->cpu_port) + break; + + member = dev->host_mask | p->vid_member; + + /* Port is a member of a bridge. */ + if (dev->br_member & (1 << port)) { + dev->member |= (1 << port); + member = dev->member; + } + break; + case BR_STATE_BLOCKING: + data |= PORT_LEARN_DISABLE; + if (port != dev->cpu_port && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + ksz_pwrite8(dev, port, P_STP_CTRL, data); + p->stp_state = state; + if (data & PORT_RX_ENABLE) + dev->rx_ports |= (1 << port); + else + dev->rx_ports &= ~(1 << port); + if (data & PORT_TX_ENABLE) + dev->tx_ports |= (1 << port); + else + dev->tx_ports &= ~(1 << port); + + /* Port membership may share register with STP state. */ + if (member >= 0 && member != p->member) + ksz9477_cfg_port_member(dev, port, (u8)member); + + /* Check if forwarding needs to be updated. */ + if (state != BR_STATE_FORWARDING) { + if (dev->br_member & (1 << port)) + dev->member &= ~(1 << port); + } + + /* When topology has changed the function ksz_update_port_member + * should be called to modify port forwarding behavior. However + * as the offload_fwd_mark indication cannot be reported here + * the switch forwarding function is not enabled. + */ +} + +static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + u8 data; + + ksz_read8(dev, REG_SW_LUE_CTRL_2, &data); + data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S); + data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); + ksz_write8(dev, REG_SW_LUE_CTRL_2, data); + if (port < dev->mib_port_cnt) { + /* flush individual port */ + ksz_pread8(dev, port, P_STP_CTRL, &data); + if (!(data & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, port, P_STP_CTRL, + data | PORT_LEARN_DISABLE); + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + ksz_pwrite8(dev, port, P_STP_CTRL, data); + } else { + /* flush all */ + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true); + } +} + +static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port, + bool flag) +{ + struct ksz_device *dev = ds->priv; + + if (flag) { + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, + PORT_VLAN_LOOKUP_VID_0, true); + ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, + true); + ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); + } else { + ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); + ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, + false); + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, + PORT_VLAN_LOOKUP_VID_0, false); + } + + return 0; +} + +static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct ksz_device *dev = ds->priv; + u32 vlan_table[3]; + u16 vid; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + if (ksz9477_get_vlan_table(dev, vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to get vlan table\n"); + return; + } + + vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M); + if (untagged) + vlan_table[1] |= BIT(port); + else + vlan_table[1] &= ~BIT(port); + vlan_table[1] &= ~(BIT(dev->cpu_port)); + + vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); + + if (ksz9477_set_vlan_table(dev, vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to set vlan table\n"); + return; + } + + /* change PVID */ + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid); + } +} + +static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct ksz_device *dev = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + u32 vlan_table[3]; + u16 vid; + u16 pvid; + + ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); + pvid = pvid & 0xFFF; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + if (ksz9477_get_vlan_table(dev, vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to get vlan table\n"); + return -ETIMEDOUT; + } + + vlan_table[2] &= ~BIT(port); + + if (pvid == vid) + pvid = 1; + + if (untagged) + vlan_table[1] &= ~BIT(port); + + if (ksz9477_set_vlan_table(dev, vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to set vlan table\n"); + return -ETIMEDOUT; + } + } + + ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); + + return 0; +} + +static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct ksz_device *dev = ds->priv; + u32 alu_table[4]; + u32 data; + int ret = 0; + + mutex_lock(&dev->alu_mutex); + + /* find any entry with mac & vid */ + data = vid << ALU_FID_INDEX_S; + data |= ((addr[0] << 8) | addr[1]); + ksz_write32(dev, REG_SW_ALU_INDEX_0, data); + + data = ((addr[2] << 24) | (addr[3] << 16)); + data |= ((addr[4] << 8) | addr[5]); + ksz_write32(dev, REG_SW_ALU_INDEX_1, data); + + /* start read operation */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000); + if (ret < 0) { + dev_dbg(dev->dev, "Failed to read ALU\n"); + goto exit; + } + + /* read ALU entry */ + ksz9477_read_table(dev, alu_table); + + /* update ALU entry */ + alu_table[0] = ALU_V_STATIC_VALID; + alu_table[1] |= BIT(port); + if (vid) + alu_table[1] |= ALU_V_USE_FID; + alu_table[2] = (vid << ALU_V_FID_S); + alu_table[2] |= ((addr[0] << 8) | addr[1]); + alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); + alu_table[3] |= ((addr[4] << 8) | addr[5]); + + ksz9477_write_table(dev, alu_table); + + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000); + if (ret < 0) + dev_dbg(dev->dev, "Failed to write ALU\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct ksz_device *dev = ds->priv; + u32 alu_table[4]; + u32 data; + int ret = 0; + + mutex_lock(&dev->alu_mutex); + + /* read any entry with mac & vid */ + data = vid << ALU_FID_INDEX_S; + data |= ((addr[0] << 8) | addr[1]); + ksz_write32(dev, REG_SW_ALU_INDEX_0, data); + + data = ((addr[2] << 24) | (addr[3] << 16)); + data |= ((addr[4] << 8) | addr[5]); + ksz_write32(dev, REG_SW_ALU_INDEX_1, data); + + /* start read operation */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000); + if (ret < 0) { + dev_dbg(dev->dev, "Failed to read ALU\n"); + goto exit; + } + + ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); + if (alu_table[0] & ALU_V_STATIC_VALID) { + ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); + ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); + ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); + + /* clear forwarding port */ + alu_table[2] &= ~BIT(port); + + /* if there is no port to forward, clear table */ + if ((alu_table[2] & ALU_V_PORT_MAP) == 0) { + alu_table[0] = 0; + alu_table[1] = 0; + alu_table[2] = 0; + alu_table[3] = 0; + } + } else { + alu_table[0] = 0; + alu_table[1] = 0; + alu_table[2] = 0; + alu_table[3] = 0; + } + + ksz9477_write_table(dev, alu_table); + + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000); + if (ret < 0) + dev_dbg(dev->dev, "Failed to write ALU\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table) +{ + alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); + alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); + alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); + alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & + ALU_V_PRIO_AGE_CNT_M; + alu->mstp = alu_table[0] & ALU_V_MSTP_M; + + alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); + alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); + alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; + + alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; + + alu->mac[0] = (alu_table[2] >> 8) & 0xFF; + alu->mac[1] = alu_table[2] & 0xFF; + alu->mac[2] = (alu_table[3] >> 24) & 0xFF; + alu->mac[3] = (alu_table[3] >> 16) & 0xFF; + alu->mac[4] = (alu_table[3] >> 8) & 0xFF; + alu->mac[5] = alu_table[3] & 0xFF; +} + +static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct ksz_device *dev = ds->priv; + int ret = 0; + u32 ksz_data; + u32 alu_table[4]; + struct alu_struct alu; + int timeout; + + mutex_lock(&dev->alu_mutex); + + /* start ALU search */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); + + do { + timeout = 1000; + do { + ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); + if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) + break; + usleep_range(1, 10); + } while (timeout-- > 0); + + if (!timeout) { + dev_dbg(dev->dev, "Failed to search ALU\n"); + ret = -ETIMEDOUT; + goto exit; + } + + /* read ALU table */ + ksz9477_read_table(dev, alu_table); + + ksz9477_convert_alu(&alu, alu_table); + + if (alu.port_forward & BIT(port)) { + ret = cb(alu.mac, alu.fid, alu.is_static, data); + if (ret) + goto exit; + } + } while (ksz_data & ALU_START); + +exit: + + /* stop ALU search */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + struct ksz_device *dev = ds->priv; + u32 static_table[4]; + u32 data; + int index; + u32 mac_hi, mac_lo; + + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); + mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); + mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); + + mutex_lock(&dev->alu_mutex); + + for (index = 0; index < dev->num_statics; index++) { + /* find empty slot first */ + data = (index << ALU_STAT_INDEX_S) | + ALU_STAT_READ | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) { + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + goto exit; + } + + /* read ALU static table */ + ksz9477_read_table(dev, static_table); + + if (static_table[0] & ALU_V_STATIC_VALID) { + /* check this has same vid & mac address */ + if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && + ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && + static_table[3] == mac_lo) { + /* found matching one */ + break; + } + } else { + /* found empty one */ + break; + } + } + + /* no available entry */ + if (index == dev->num_statics) + goto exit; + + /* add entry */ + static_table[0] = ALU_V_STATIC_VALID; + static_table[1] |= BIT(port); + if (mdb->vid) + static_table[1] |= ALU_V_USE_FID; + static_table[2] = (mdb->vid << ALU_V_FID_S); + static_table[2] |= mac_hi; + static_table[3] = mac_lo; + + ksz9477_write_table(dev, static_table); + + data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + +exit: + mutex_unlock(&dev->alu_mutex); +} + +static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + struct ksz_device *dev = ds->priv; + u32 static_table[4]; + u32 data; + int index; + int ret = 0; + u32 mac_hi, mac_lo; + + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); + mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); + mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); + + mutex_lock(&dev->alu_mutex); + + for (index = 0; index < dev->num_statics; index++) { + /* find empty slot first */ + data = (index << ALU_STAT_INDEX_S) | + ALU_STAT_READ | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000); + if (ret < 0) { + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + goto exit; + } + + /* read ALU static table */ + ksz9477_read_table(dev, static_table); + + if (static_table[0] & ALU_V_STATIC_VALID) { + /* check this has same vid & mac address */ + + if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && + ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && + static_table[3] == mac_lo) { + /* found matching one */ + break; + } + } + } + + /* no available entry */ + if (index == dev->num_statics) + goto exit; + + /* clear port */ + static_table[1] &= ~BIT(port); + + if ((static_table[1] & ALU_V_PORT_MAP) == 0) { + /* delete entry */ + static_table[0] = 0; + static_table[1] = 0; + static_table[2] = 0; + static_table[3] = 0; + } + + ksz9477_write_table(dev, static_table); + + data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000); + if (ret < 0) + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress) +{ + struct ksz_device *dev = ds->priv; + + if (ingress) + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + else + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + + /* configure mirror port */ + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, true); + + ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + + return 0; +} + +static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct ksz_device *dev = ds->priv; + u8 data; + + if (mirror->ingress) + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + else + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + + if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, false); +} + +static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + u8 data8; + u8 member; + u16 data16; + struct ksz_port *p = &dev->ports[port]; + + /* enable tag tail for host port */ + if (cpu_port) + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, + true); + + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); + + /* set back pressure */ + ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); + + /* enable broadcast storm limit */ + ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + /* disable DiffServ priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); + + /* replace priority */ + ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, + false); + ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, + MTI_PVID_REPLACE, false); + + /* enable 802.1p priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + if (port < dev->phy_port_cnt) { + /* do not force flow control */ + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + false); + + } else { + /* force flow control */ + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + true); + + /* configure MAC to 1G & RGMII mode */ + ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); + data8 &= ~PORT_MII_NOT_1GBIT; + data8 &= ~PORT_MII_SEL_M; + switch (dev->interface) { + case PHY_INTERFACE_MODE_MII: + data8 |= PORT_MII_NOT_1GBIT; + data8 |= PORT_MII_SEL; + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_RMII: + data8 |= PORT_MII_NOT_1GBIT; + data8 |= PORT_RMII_SEL; + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_GMII: + data8 |= PORT_GMII_SEL; + p->phydev.speed = SPEED_1000; + break; + default: + data8 &= ~PORT_RGMII_ID_IG_ENABLE; + data8 &= ~PORT_RGMII_ID_EG_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IG_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_EG_ENABLE; + data8 |= PORT_RGMII_SEL; + p->phydev.speed = SPEED_1000; + break; + } + ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); + p->phydev.duplex = 1; + } + if (cpu_port) { + member = dev->port_mask; + dev->on_ports = dev->host_mask; + dev->live_ports = dev->host_mask; + } else { + member = dev->host_mask | p->vid_member; + dev->on_ports |= (1 << port); + + /* Link was detected before port is enabled. */ + if (p->phydev.link) + dev->live_ports |= (1 << port); + } + ksz9477_cfg_port_member(dev, port, member); + + /* clear pending interrupts */ + if (port < dev->phy_port_cnt) + ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); +} + +static void ksz9477_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + int i; + + ds->num_ports = dev->port_cnt; + + for (i = 0; i < dev->port_cnt; i++) { + if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { + dev->cpu_port = i; + dev->host_mask = (1 << dev->cpu_port); + dev->port_mask |= dev->host_mask; + + /* enable cpu port */ + ksz9477_port_setup(dev, i, true); + p = &dev->ports[dev->cpu_port]; + p->vid_member = dev->port_mask; + p->on = 1; + } + } + + dev->member = dev->host_mask; + + for (i = 0; i < dev->mib_port_cnt; i++) { + if (i == dev->cpu_port) + continue; + p = &dev->ports[i]; + + /* Initialize to non-zero so that ksz_cfg_port_member() will + * be called. + */ + p->vid_member = (1 << i); + p->member = dev->port_mask; + ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED); + p->on = 1; + if (i < dev->phy_port_cnt) + p->phy = 1; + if (dev->chip_id == 0x00947700 && i == 6) { + p->sgmii = 1; + + /* SGMII PHY detection code is not implemented yet. */ + p->phy = 0; + } + } +} + +static int ksz9477_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret = 0; + + dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), + dev->num_vlans, GFP_KERNEL); + if (!dev->vlan_cache) + return -ENOMEM; + + ret = ksz9477_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + /* accept packet up to 2000bytes */ + ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); + + ksz9477_config_cpu_port(ds); + |