diff options
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/80003es2lan.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/defines.h | 60 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/e1000.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 24 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/mac.c | 31 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/phy.c | 179 |
9 files changed, 138 insertions, 204 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 765211a289d8..a00457abce69 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -624,16 +624,16 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) e_dbg("GG82563 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); /* Reset the phy to commit changes. */ - phy_data |= MII_CR_RESET; + phy_data |= BMCR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index db364b69f87e..cf86090edd3b 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -447,13 +447,13 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) break; case e1000_82574: case e1000_82583: - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 1257f917af34..615b900c0152 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -563,66 +563,6 @@ E1000_GCR_TXDSCW_NO_SNOOP | \ E1000_GCR_TXDSCR_NO_SNOOP) -/* PHY Control Register */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ - -/* Autoneg Advertisement Register */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ - -/* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ - -/* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ - -/* 1000BASE-T Control Register */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ - -/* 1000BASE-T Status Register */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ - - -/* PHY 1000 MII Register/Bit Definitions */ -/* PHY Registers defined by IEEE */ -#define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Register */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ - /* NVM Control */ #define E1000_EECD_SK 0x00000001 /* NVM Clock */ #define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index c7d5c5b92ee5..4b0bd9c225cc 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -45,6 +45,7 @@ #include <linux/net_tstamp.h> #include <linux/ptp_clock_kernel.h> #include <linux/ptp_classify.h> +#include <linux/mii.h> #include "hw.h" struct e1000_info; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index b1447783ff29..c6c3e921686d 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -472,10 +472,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = 0; /* was idle_errors */ - e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); - regs_buff[24] = (u32)phy_data; /* phy local receiver status */ - regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ + regs_buff[21] = 0; /* was idle_errors */ + e1e_rphy(hw, MII_STAT1000, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -1284,7 +1284,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.type == e1000_phy_ife) { /* force 100, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x6100); + e1e_wphy(hw, MII_BMCR, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ ctrl_reg = er32(CTRL); @@ -1307,9 +1307,9 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Auto-MDI/MDIX Off */ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); /* reset to update Auto-MDI/MDIX */ - e1e_wphy(hw, PHY_CONTROL, 0x9140); + e1e_wphy(hw, MII_BMCR, 0x9140); /* autoneg off */ - e1e_wphy(hw, PHY_CONTROL, 0x8140); + e1e_wphy(hw, MII_BMCR, 0x8140); break; case e1000_phy_gg82563: e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); @@ -1363,7 +1363,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) } /* force 1000, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x4140); + e1e_wphy(hw, MII_BMCR, 0x4140); mdelay(250); /* Now set up the MAC to the same speed/duplex as the PHY. */ @@ -1538,10 +1538,10 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->mac.autoneg = 1; if (hw->phy.type == e1000_phy_gg82563) e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); - e1e_rphy(hw, PHY_CONTROL, &phy_reg); - if (phy_reg & MII_CR_LOOPBACK) { - phy_reg &= ~MII_CR_LOOPBACK; - e1e_wphy(hw, PHY_CONTROL, phy_reg); + e1e_rphy(hw, MII_BMCR, &phy_reg); + if (phy_reg & BMCR_LOOPBACK) { + phy_reg &= ~BMCR_LOOPBACK; + e1e_wphy(hw, MII_BMCR, phy_reg); if (hw->phy.ops.commit) hw->phy.ops.commit(hw); } diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 5ca21f9b3334..a019b46f30e2 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -312,12 +312,12 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) u16 retry_count; for (retry_count = 0; retry_count < 2; retry_count++) { - ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID1, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) continue; phy_id = (u32)(phy_reg << 16); - ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg); + ret_val = e1e_rphy_locked(hw, MII_PHYSID2, &phy_reg); if (ret_val || (phy_reg == 0xFFFF)) { phy_id = 0; continue; @@ -882,8 +882,8 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) { - e1e_rphy_locked(hw, PHY_LP_ABILITY, &data); - if (data & NWAY_LPAR_100TX_FD_CAPS) + e1e_rphy_locked(hw, MII_LPA, &data); + if (data & LPA_100FULL) lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; else /* EEE is not supported in 100Half, so ignore @@ -1792,7 +1792,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) */ if (hw->phy.revision < 2) { e1000e_phy_sw_reset(hw); - ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140); + ret_val = e1e_wphy(hw, MII_BMCR, 0x3140); } } diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 7365288f20f7..b78e02174601 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1053,14 +1053,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); + ret_val = e1e_rphy(hw, MII_BMSR, &mii_status_reg); if (ret_val) return ret_val; - if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + if (!(mii_status_reg & BMSR_ANEGCOMPLETE)) { e_dbg("Copper PHY and Auto Neg has not completed.\n"); return ret_val; } @@ -1071,11 +1071,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * Page Ability Register (Address 5) to determine how * flow control was negotiated. */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_nway_adv_reg); if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); + ret_val = e1e_rphy(hw, MII_LPA, &mii_nway_lp_ability_reg); if (ret_val) return ret_val; @@ -1112,8 +1111,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * 1 | DC | 1 | DC | E1000_fc_full * */ - if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP)) { /* Now we need to check if the user selected Rx ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx @@ -1135,10 +1134,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause */ - else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if (!(mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + (mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_tx_pause; e_dbg("Flow Control = Tx PAUSE frames only.\n"); } @@ -1149,10 +1148,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) *-------|---------|-------|---------|-------------------- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause */ - else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + else if ((mii_nway_adv_reg & ADVERTISE_PAUSE_CAP) && + (mii_nway_adv_reg & ADVERTISE_PAUSE_ASYM) && + !(mii_nway_lp_ability_reg & LPA_PAUSE_CAP) && + (mii_nway_lp_ability_reg & LPA_PAUSE_ASYM)) { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = Rx PAUSE frames only.\n"); } else { diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index eb01a55f60a6..e0eb5dddf3ea 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -42,7 +42,6 @@ #include <linux/slab.h> #include <net/checksum.h> #include <net/ip6_checksum.h> -#include <linux/mii.h> #include <linux/ethtool.h> #include <linux/if_vlan.h> #include <linux/cpu.h> @@ -1117,9 +1116,9 @@ static void e1000_print_hw_hang(struct work_struct *work) adapter->tx_hang_recheck = false; netif_stop_queue(netdev); - e1e_rphy(hw, PHY_STATUS, &phy_status); - e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); - e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + e1e_rphy(hw, MII_BMSR, &phy_status); + e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); + e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); @@ -4677,14 +4676,14 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); - ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); - ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); - ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); - ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); - ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); - ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); + ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); + ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); + ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); + ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); + ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); + ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); } else { @@ -4856,9 +4855,9 @@ static void e1000_watchdog_task(struct work_struct *work) (adapter->link_duplex == HALF_DUPLEX)) { u16 autoneg_exp; - e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); + e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); - if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) + if (!(autoneg_exp & EXPANSION_NWAY)) e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); } diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 6f32811dbcf0..ae656f16c9fd 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -131,13 +131,13 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) return 0; while (retry_count < 2) { - ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); if (ret_val) return ret_val; phy->id = (u32)(phy_id << 16); udelay(20); - ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); + ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); if (ret_val) return ret_val; @@ -641,31 +641,31 @@ static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) u16 phy_data; /* Resolve Master/Slave mode */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &phy_data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data); if (ret_val) return ret_val; /* load defaults for future use */ - hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? + hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ? + ((phy_data & CTL1000_AS_MASTER) ? e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto; switch (hw->phy.ms_type) { case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); break; case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); + phy_data |= CTL1000_ENABLE_MASTER; + phy_data &= ~(CTL1000_AS_MASTER); break; case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; + phy_data &= ~CTL1000_ENABLE_MASTER; /* fall-through */ default: break; } - return e1e_wphy(hw, PHY_1000T_CTRL, phy_data); + return e1e_wphy(hw, MII_CTRL1000, phy_data); } /** @@ -943,12 +943,12 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) return ret_val; /* Set auto Master/Slave resolution process */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data); + ret_val = e1e_rphy(hw, MII_CTRL1000, &data); if (ret_val) return ret_val; - data &= ~CR_1000T_MS_ENABLE; - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data); + data &= ~CTL1000_ENABLE_MASTER; + ret_val = e1e_wphy(hw, MII_CTRL1000, data); if (ret_val) return ret_val; } @@ -978,13 +978,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) phy->autoneg_advertised &= phy->autoneg_mask; /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg); if (ret_val) return ret_val; if (phy->autoneg_mask & ADVERTISE_1000_FULL) { /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg); if (ret_val) return ret_val; } @@ -1000,36 +1000,35 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ - mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); - mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL | + ADVERTISE_100HALF | + ADVERTISE_10FULL | ADVERTISE_10HALF); + mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { e_dbg("Advertise 10mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10HALF; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { e_dbg("Advertise 10mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10FULL; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { e_dbg("Advertise 100mb Half duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100HALF; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { e_dbg("Advertise 100mb Full duplex\n"); - mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100FULL; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ @@ -1039,14 +1038,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { e_dbg("Advertise 1000mb Full duplex\n"); - mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + mii_1000t_ctrl_reg |= ADVERTISE_1000FULL; } /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation - * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * Advertisement Register (MII_ADVERTISE) and re-start auto- * negotiation. * * The possible values of the "fc" parameter are: @@ -1064,7 +1063,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Flow control (Rx & Tx) is completely disabled by a * software over-ride. */ - mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg &= + ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_rx_pause: /* Rx Flow control is enabled, and Tx Flow control is @@ -1076,34 +1076,36 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * (in e1000e_config_fc_after_link_up) we will disable the * hw's ability to send PAUSE frames. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; case e1000_fc_tx_pause: /* Tx Flow control is enabled, and Rx Flow control is * disabled, by a software over-ride. */ - mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; - mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM; + mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP; break; case e1000_fc_full: /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ - mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + mii_autoneg_adv_reg |= + (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); break; default: e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } - ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg); if (ret_val) return ret_val; e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) - ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg); return ret_val; } @@ -1145,12 +1147,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) /* Restart auto-negotiation by setting the Auto Neg Enable bit and * the Auto Neg Restart bit in the PHY control register. */ - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART); + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -1237,13 +1239,13 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -1315,13 +1317,13 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) e_dbg("M88E1000 PSCR: %X\n", phy_data); - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -1408,13 +1410,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) u16 data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &data); + ret_val = e1e_rphy(hw, MII_BMCR, &data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &data); - ret_val = e1e_wphy(hw, PHY_CONTROL, data); + ret_val = e1e_wphy(hw, MII_BMCR, data); if (ret_val) return ret_val; @@ -1458,13 +1460,13 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) /** * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure - * @phy_ctrl: pointer to current value of PHY_CONTROL + * @phy_ctrl: pointer to current value of MII_BMCR * * Forces speed and duplex on the PHY by doing the following: disable flow * control, force speed/duplex on the MAC, disable auto speed detection, * disable auto-negotiation, configure duplex, configure speed, configure * the collision distance, write configuration to CTRL register. The - * caller must write to the PHY_CONTROL register for these settings to + * caller must write to the MII_BMCR register for these settings to * take affect. **/ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) @@ -1484,29 +1486,28 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl &= ~E1000_CTRL_ASDE; /* Disable autoneg on the phy */ - *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + *phy_ctrl &= ~BMCR_ANENABLE; /* Forcing Full or Half Duplex? */ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; - *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + *phy_ctrl &= ~BMCR_FULLDPLX; e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; - *phy_ctrl |= MII_CR_FULL_DUPLEX; + *phy_ctrl |= BMCR_FULLDPLX; e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { ctrl |= E1000_CTRL_SPD_100; - *phy_ctrl |= MII_CR_SPEED_100; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + *phy_ctrl |= BMCR_SPEED100; + *phy_ctrl &= ~BMCR_SPEED1000; e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - *phy_ctrl |= MII_CR_SPEED_10; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100); e_dbg("Forcing 10mb\n"); } @@ -1747,13 +1748,13 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) + if (phy_status & BMSR_ANEGCOMPLETE) break; msleep(100); } @@ -1780,21 +1781,21 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u16 i, phy_status; for (i = 0; i < iterations; i++) { - /* Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the MII_BMSR register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ udelay(usec_interval); - ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); + ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & MII_SR_LINK_STATUS) + if (phy_status & BMSR_LSTATUS) break; if (usec_interval >= 1000) mdelay(usec_interval/1000); @@ -1968,17 +1969,15 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); + ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data); if (ret_val) return ret_val; - phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (phy_data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (phy_data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { /* Set values to "undefined" */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2032,17 +2031,15 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -2116,12 +2113,12 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) s32 ret_val; u16 phy_ctrl; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl); if (ret_val) return ret_val; - phy_ctrl |= MII_CR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); + phy_ctrl |= BMCR_RESET; + ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl); if (ret_val) return ret_val; @@ -2751,9 +2748,9 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg &= ~BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); } /** @@ -2769,9 +2766,9 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) u16 mii_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); + e1e_rphy(hw, MII_BMCR, &mii_reg); + mii_reg |= BMCR_PDOWN; + e1e_wphy(hw, MII_BMCR, mii_reg); usleep_range(1000, 2000); } @@ -3087,8 +3084,8 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) return 0; /* Do not apply workaround if in PHY loopback bit 14 set */ - e1e_rphy(hw, PHY_CONTROL, &data); - if (data & PHY_CONTROL_LB) + e1e_rphy(hw, MII_BMCR, &data); + if (data & BMCR_LOOPBACK) return 0; /* check if link is up and at 1Gbps */ @@ -3152,13 +3149,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, MII_BMCR, &phy_data); if (ret_val) return ret_val; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, MII_BMCR, phy_data); if (ret_val) return ret_val; @@ -3226,17 +3223,15 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, MII_STAT1000, &data); if (ret_val) return ret_val; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->local_rx = (data & LPA_1000LOCALRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + phy->remote_rx = (data & LPA_1000REMRXOK) + ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; |