diff options
94 files changed, 6663 insertions, 690 deletions
diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 1fee72f4d331..4ff84623d5e1 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -74,7 +74,7 @@ the operations defined in clk.h: long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, - struct clk **best_parent_clk); + struct clk_hw **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt new file mode 100644 index 000000000000..847d98bae8cf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt @@ -0,0 +1,38 @@ +* Samsung Exynos4415 Clock Controller + +The Exynos4415 clock controller generates and supplies clock to various +consumer devices within the Exynos4415 SoC. + +Required properties: + +- compatible: should be one of the following: + - "samsung,exynos4415-cmu" - for the main system clocks controller + (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains). + - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory + Controller (DMC) domain clock controller. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos4415.h header and can be used in device +tree sources. + +Example 1: An example of a clock controller node is listed below. + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos4415-cmu"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + cmu-dmc: clock-controller@105C0000 { + compatible = "samsung,exynos4415-cmu-dmc"; + reg = <0x105C0000 0x3000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt new file mode 100644 index 000000000000..6d3d5f80c1c3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt @@ -0,0 +1,93 @@ +* Samsung Exynos7 Clock Controller + +Exynos7 clock controller has various blocks which are instantiated +independently from the device-tree. These clock controllers +generate and supply clocks to various hardware blocks within +the SoC. + +Each clock is assigned an identifier and client nodes can use +this identifier to specify the clock which they consume. All +available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos7-clk.h header and can be used in +device tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It +is expected that they are defined using standard clock bindings +with following clock-output-names: + + - "fin_pll" - PLL input clock from XXTI + +Required Properties for Clock Controller: + + - compatible: clock controllers will use one of the following + compatible strings to indicate the clock controller + functionality. + + - "samsung,exynos7-clock-topc" + - "samsung,exynos7-clock-top0" + - "samsung,exynos7-clock-top1" + - "samsung,exynos7-clock-ccore" + - "samsung,exynos7-clock-peric0" + - "samsung,exynos7-clock-peric1" + - "samsung,exynos7-clock-peris" + - "samsung,exynos7-clock-fsys0" + - "samsung,exynos7-clock-fsys1" + + - reg: physical base address of the controller and the length of + memory mapped region. + + - #clock-cells: should be 1. + + - clocks: list of clock identifiers which are fed as the input to + the given clock controller. Please refer the next section to + find the input clocks for a given controller. + +- clock-names: list of names of clocks which are fed as the input + to the given clock controller. + +Input clocks for top0 clock controller: + - fin_pll + - dout_sclk_bus0_pll + - dout_sclk_bus1_pll + - dout_sclk_cc_pll + - dout_sclk_mfc_pll + +Input clocks for top1 clock controller: + - fin_pll + - dout_sclk_bus0_pll + - dout_sclk_bus1_pll + - dout_sclk_cc_pll + - dout_sclk_mfc_pll + +Input clocks for ccore clock controller: + - fin_pll + - dout_aclk_ccore_133 + +Input clocks for peric0 clock controller: + - fin_pll + - dout_aclk_peric0_66 + - sclk_uart0 + +Input clocks for peric1 clock controller: + - fin_pll + - dout_aclk_peric1_66 + - sclk_uart1 + - sclk_uart2 + - sclk_uart3 + +Input clocks for peris clock controller: + - fin_pll + - dout_aclk_peris_66 + +Input clocks for fsys0 clock controller: + - fin_pll + - dout_aclk_fsys0_200 + - dout_sclk_mmc2 + +Input clocks for fsys1 clock controller: + - fin_pll + - dout_aclk_fsys1_200 + - dout_sclk_mmc0 + - dout_sclk_mmc1 diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt new file mode 100644 index 000000000000..af376a01f2b7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt @@ -0,0 +1,21 @@ +* Marvell MMP2 Clock Controller + +The MMP2 clock subsystem generates and supplies clock to various +controllers within the MMP2 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,mmp2-clock" - controller compatible with MMP2 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 3 places in SOC has clock control logic: + "mpmu", "apmu", "apbc". So three reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>. diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt new file mode 100644 index 000000000000..c62eb1d173a6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt @@ -0,0 +1,21 @@ +* Marvell PXA168 Clock Controller + +The PXA168 clock subsystem generates and supplies clock to various +controllers within the PXA168 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa168-clock" - controller compatible with PXA168 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 3 places in SOC has clock control logic: + "mpmu", "apmu", "apbc". So three reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>. diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt new file mode 100644 index 000000000000..d9f41f3c03a0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt @@ -0,0 +1,21 @@ +* Marvell PXA910 Clock Controller + +The PXA910 clock subsystem generates and supplies clock to various +controllers within the PXA910 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa910-clock" - controller compatible with PXA910 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 4 places in SOC has clock control logic: + "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>. diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt index 952e373178d2..054f65f9319c 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -7,11 +7,16 @@ to 64. Required Properties: - compatible: Must be one of the following + - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks + - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks - "renesas,cpg-div6-clock" for generic DIV6 clocks - reg: Base address and length of the memory resource used by the DIV6 clock - - clocks: Reference to the parent clock + - clocks: Reference to the parent clock(s); either one, four, or eight + clocks must be specified. For clocks with multiple parents, invalid + settings must be specified as "<0>". - #clock-cells: Must be 0 - clock-output-names: The name of the clock as a free-form string @@ -19,10 +24,11 @@ Required Properties: Example ------- - sd2_clk: sd2_clk@e6150078 { - compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe6150078 0 4>; - clocks = <&pll1_div2_clk>; + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, + <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; + clock-output-names = "sdhi2ck"; }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index a5f52238c80d..2e18676bd4b5 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -26,11 +26,11 @@ Required Properties: must appear in the same order as the output clocks. - #clock-cells: Must be 1 - clock-output-names: The name of the clocks as free-form strings - - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31) + - clock-indices: Indices of the gate clocks into the group (0 to 31) -The clocks, clock-output-names and renesas,clock-indices properties contain one -entry per gate clock. The MSTP groups are sparsely populated. Unimplemented -gate clocks must not be declared. +The clocks, clock-output-names and clock-indices properties contain one entry +per gate clock. The MSTP groups are sparsely populated. Unimplemented gate +clocks must not be declared. Example diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index ed116df9c3e7..67b2b99f2b33 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -10,14 +10,17 @@ Required properties: "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4 "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23 + "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80 "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 + "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80 "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-a10-axi-clk" - for the AXI clock "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates "allwinner,sun4i-a10-ahb-clk" - for the AHB clock + "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s @@ -26,24 +29,29 @@ Required properties: "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31 "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23 + "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80 + "allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80 + "allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80 "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 "allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23 + "allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80 "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s "allwinner,sun6i-a |