diff options
38 files changed, 2414 insertions, 763 deletions
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index 6908d3aca598..edebfa0a985e 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -26,6 +26,10 @@ Required properties : of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values when referring to thermal sensors. +Note: +- the "critical" type trip points will be set to SOC_THERM hardware as the +shut down temperature. Once the temperature of this thermal zone is higher +than it, the system will be shutdown or reset by hardware. Example : @@ -51,5 +55,13 @@ Example: referring to thermal sensors : thermal-sensors = <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + + trips { + cpu_shutdown_trip: shutdown-trip { + temperature = <102500>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index e5ee3f159893..a8e52c8ccfcc 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -11,7 +11,6 @@ Required properties: - "renesas,thermal-r8a7791" (R-Car M2-W) - "renesas,thermal-r8a7792" (R-Car V2H) - "renesas,thermal-r8a7793" (R-Car M2-N) - - "renesas,thermal-r8a7794" (R-Car E2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt new file mode 100644 index 000000000000..212198d4b937 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/tango-thermal.txt @@ -0,0 +1,17 @@ +* Tango Thermal + +The SMP8758 SoC includes 3 instances of this temperature sensor +(in the CPU, video decoder, and PCIe controller). + +Required properties: +- #thermal-sensor-cells: Should be 0 (see thermal.txt) +- compatible: "sigma,smp8758-thermal" +- reg: Address range of the thermal registers + +Example: + + cpu_temp: thermal@920100 { + #thermal-sensor-cells = <0>; + compatible = "sigma,smp8758-thermal"; + reg = <0x920100 12>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt new file mode 100644 index 000000000000..d72355502b78 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt @@ -0,0 +1,89 @@ +General Purpose Analog To Digital Converter (ADC) based thermal sensor. + +On some of platforms, thermal sensor like thermistors are connected to +one of ADC channel and sensor resistance is read via voltage across the +sensor resistor. The voltage read across the sensor is mapped to +temperature using voltage-temperature lookup table. + +Required properties: +=================== +- compatible: Must be "generic-adc-thermal". +- temperature-lookup-table: Two dimensional array of Integer; lookup table + to map the relation between ADC value and + temperature. When ADC is read, the value is + looked up on the table to get the equivalent + temperature. + The first value of the each row of array is the + temperature in milliCelsius and second value of + the each row of array is the ADC read value. +- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description + of this property. + +Example : +#include <dt-bindings/thermal/thermal.h> + +i2c@7000c400 { + ads1015: ads1015@4a { + reg = <0x4a>; + compatible = "ads1015"; + sampling-frequency = <3300>; + #io-channel-cells = <1>; + }; +}; + +tboard_thermistor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&ads1015 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 2578 + (-39000) 2577 + (-38000) 2576 + (-37000) 2575 + (-36000) 2574 + (-35000) 2573 + (-34000) 2572 + (-33000) 2571 + (-32000) 2569 + (-31000) 2568 + (-30000) 2567 + :::::::::: + 118000 254 + 119000 247 + 120000 240 + 121000 233 + 122000 226 + 123000 220 + 124000 214 + 125000 208>; +}; + +dummy_cool_dev: dummy-cool-dev { + compatible = "dummy-cooling-dev"; + #cooling-cells = <2>; /* min followed by max */ +}; + +thermal-zones { + Tboard { + polling-delay = <15000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor>; + + trips { + therm_est_trip: therm_est_trip { + temperature = <40000>; + type = "active"; + hysteresis = <1000>; + }; + }; + + cooling-maps { + map0 { + trip = <&therm_est_trip>; + cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + + }; + }; +}; diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index ed419d6c8dec..efc3f3d293c4 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -69,8 +69,8 @@ temperature) and throttle appropriate devices. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and - unbind all the thermal cooling devices it uses. + It deletes the corresponding entry from /sys/class/thermal folder and + unbinds all the thermal cooling devices it uses. 1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register( struct device *dev, int sensor_id, void *data, @@ -146,32 +146,32 @@ temperature) and throttle appropriate devices. This interface function adds a new thermal cooling device (fan/processor/...) to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself - to all the thermal zone devices register at the same time. + to all the thermal zone devices registered at the same time. name: the cooling device name. devdata: device private data. ops: thermal cooling devices call-backs. .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. + .get_cur_state: get the Currently requested throttle state of the cooling device. .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and - unbind itself from all the thermal zone devices using it. + This interface function removes the thermal cooling device. + It deletes the corresponding entry from /sys/class/thermal folder and + unbinds itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, unsigned long upper, unsigned long lower, unsigned int weight); - This interface function bind a thermal cooling device to the certain trip + This interface function binds a thermal cooling device to a particular trip point of a thermal zone device. This function is usually called in the thermal zone device .bind callback. tz: the thermal zone device cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + trip: indicates which trip point in this thermal zone the cooling device + is associated with. upper:the Maximum cooling state for this trip point. THERMAL_NO_LIMIT means no upper limit, and the cooling device can be in max_state. @@ -184,13 +184,13 @@ temperature) and throttle appropriate devices. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain + This interface function unbinds a thermal cooling device from a particular trip point of a thermal zone device. This function is usually called in the thermal zone device .unbind callback. tz: the thermal zone device cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + trip: indicates which trip point in this thermal zone the cooling device + is associated with. 1.4 Thermal Zone Parameters 1.4.1 struct thermal_bind_params @@ -210,13 +210,13 @@ temperature) and throttle appropriate devices. this thermal zone and cdev, for a particular trip point. If nth bit is set, then the cdev and thermal zone are bound for trip point n. - .limits: This is an array of cooling state limits. Must have exactly - 2 * thermal_zone.number_of_trip_points. It is an array consisting - of tuples <lower-state upper-state> of state limits. Each trip - will be associated with one state limit tuple when binding. - A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> - on all trips. These limits are used when binding a cdev to a - trip point. + .binding_limits: This is an array of cooling state limits. Must have + exactly 2 * thermal_zone.number_of_trip_points. It is an + array consisting of tuples <lower-state upper-state> of + state limits. Each trip will be associated with one state + limit tuple when binding. A NULL pointer means + <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips. + These limits are used when binding a cdev to a trip point. .match: This call back returns success(0) if the 'tz and cdev' need to be bound, as per platform data. 1.4.2 struct thermal_zone_params @@ -351,8 +351,8 @@ cdev[0-*] RO, Optional cdev[0-*]_trip_point - The trip point with which cdev[0-*] is associated in this thermal - zone; -1 means the cooling device is not associated with any trip + The trip point in this thermal zone which cdev[0-*] is associated + with; -1 means the cooling device is not associated with any trip point. RO, Optional diff --git a/MAINTAINERS b/MAINTAINERS index ab7e05d328c1..81e9c984d2f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11296,6 +11296,7 @@ F: drivers/platform/x86/thinkpad_acpi.c TI BANDGAP AND THERMAL DRIVER M: Eduardo Valentin <edubezval@gmail.com> +M: Keerthy <j-keerthy@ti.com> L: linux-pm@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c index 6f602c7a71bd..643f43179df1 100644 --- a/drivers/cpufreq/mt8173-cpufreq.c +++ b/drivers/cpufreq/mt8173-cpufreq.c @@ -307,17 +307,24 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, return 0; } +#define DYNAMIC_POWER "dynamic-power-coefficient" + static void mtk_cpufreq_ready(struct cpufreq_policy *policy) { struct mtk_cpu_dvfs_info *info = policy->driver_data; struct device_node *np = of_node_get(info->cpu_dev->of_node); + u32 capacitance = 0; if (WARN_ON(!np)) return; if (of_find_property(np, "#cooling-cells", NULL)) { - info->cdev = of_cpufreq_cooling_register(np, - policy->related_cpus); + of_property_read_u32(np, DYNAMIC_POWER, &capacitance); + + info->cdev = of_cpufreq_power_cooling_register(np, + policy->related_cpus, + capacitance, + NULL); if (IS_ERR(info->cdev)) { dev_err(info->cpu_dev, diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 0addc84ba948..69166ab3151d 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -77,7 +77,6 @@ static const u8 LM75_REG_TEMP[3] = { struct lm75_data { struct i2c_client *client; struct device *hwmon_dev; - struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -306,11 +305,9 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) if (IS_ERR(data->hwmon_dev)) return PTR_ERR(data->hwmon_dev); - data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0, - data->hwmon_dev, - &lm75_of_thermal_ops); - if (IS_ERR(data->tz)) - data->tz = NULL; + devm_thermal_zone_of_sensor_register(data->hwmon_dev, 0, + data->hwmon_dev, + &lm75_of_thermal_ops); dev_info(dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name); @@ -322,7 +319,6 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); - thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz); hwmon_device_unregister(data->hwmon_dev); lm75_write_value(client, LM75_REG_CONF, data->orig_conf); return 0; diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index faa6e8dfbaaf..8ef7b713cb1a 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -259,7 +259,6 @@ struct ntc_data { struct device *dev; int n_comp; char name[PLATFORM_NAME_SIZE]; - struct thermal_zone_device *tz; }; #if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO) @@ -579,6 +578,7 @@ static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = { static int ntc_thermistor_probe(struct platform_device *pdev) { + struct thermal_zone_device *tz; const struct of_device_id *of_id = of_match_device(of_match_ptr(ntc_match), &pdev->dev); const struct platform_device_id *pdev_id; @@ -677,12 +677,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n", pdev_id->name); - data->tz = thermal_zone_of_sensor_register(data->dev, 0, data->dev, - &ntc_of_thermal_ops); - if (IS_ERR(data->tz)) { + tz = devm_thermal_zone_of_sensor_register(data->dev, 0, data->dev, + &ntc_of_thermal_ops); + if (IS_ERR(tz)) dev_dbg(&pdev->dev, "Failed to register to thermal fw.\n"); - data->tz = NULL; - } return 0; err_after_sysfs: @@ -700,8 +698,6 @@ static int ntc_thermistor_remove(struct platform_device *pdev) sysfs_remove_group(&data->dev->kobj, &ntc_attr_group); ntc_iio_channel_release(pdata); - thermal_zone_of_sensor_unregister(data->dev, data->tz); - return 0; } diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 912b449c8303..25b44e68926d 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -31,10 +31,8 @@ struct sensor_data { }; struct scpi_thermal_zone { - struct list_head list; int sensor_id; struct scpi_sensors *scpi_sensors; - struct thermal_zone_device *tzd; }; struct scpi_sensors { @@ -92,20 +90,6 @@ scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf) return sprintf(buf, "%s\n", sensor->info.name); } -static void -unregister_thermal_zones(struct platform_device *pdev, - struct scpi_sensors *scpi_sensors) -{ - struct list_head *pos; - - list_for_each(pos, &scpi_sensors->thermal_zones) { - struct scpi_thermal_zone *zone; - - zone = list_entry(pos, struct scpi_thermal_zone, list); - thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd); - } -} - static struct thermal_zone_of_device_ops scpi_sensor_ops = { .get_temp = scpi_read_temp, }; @@ -118,7 +102,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev) struct scpi_ops *scpi_ops; struct device *hwdev, *dev = &pdev->dev; struct scpi_sensors *scpi_sensors; - int ret, idx; + int idx, ret; scpi_ops = get_scpi_ops(); if (!scpi_ops) @@ -232,48 +216,35 @@ static int scpi_hwmon_probe(struct platform_device *pdev) INIT_LIST_HEAD(&scpi_sensors->thermal_zones); for (i = 0; i < nr_sensors; i++) { struct sensor_data *sensor = &scpi_sensors->data[i]; + struct thermal_zone_device *z; struct scpi_thermal_zone *zone; if (sensor->info.class != TEMPERATURE) continue; zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL); - if (!zone) { - ret = -ENOMEM; - goto unregister_tzd; - } + if (!zone) + return -ENOMEM; zone->sensor_id = i; zone->scpi_sensors = scpi_sensors; - zone->tzd = thermal_zone_of_sensor_register(dev, - sensor->info.sensor_id, zone, &scpi_sensor_ops); + z = devm_thermal_zone_of_sensor_register(dev, + sensor->info.sensor_id, + zone, + &scpi_sensor_ops); /* * The call to thermal_zone_of_sensor_register returns * an error for sensors that are not associated with * any thermal zones or if the thermal subsystem is * not configured. */ - if (IS_ERR(zone->tzd)) { + if (IS_ERR(z)) { devm_kfree(dev, zone); continue; } - list_add(&zone->list, &scpi_sensors->thermal_zones); } return 0; - -unregister_tzd: - unregister_thermal_zones(pdev, scpi_sensors); - return ret; -} - -static int scpi_hwmon_remove(struct platform_device *pdev) -{ - struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev); - - unregister_thermal_zones(pdev, scpi_sensors); - - return 0; } static const struct of_device_id scpi_of_match[] = { @@ -288,7 +259,6 @@ static struct platform_driver scpi_hwmon_platdrv = { .of_match_table = scpi_of_match, }, .probe = scpi_hwmon_probe, - .remove = scpi_hwmon_remove, }; module_platform_driver(scpi_hwmon_platdrv); diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 5289aa0980a8..f1e96fd7f445 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -53,7 +53,6 @@ struct tmp102 { struct i2c_client *client; struct device *hwmon_dev; - struct thermal_zone_device *tz; struct mutex lock; u16 config_orig; unsigned long last_update; @@ -232,10 +231,8 @@ static int tmp102_probe(struct i2c_client *client, goto fail_restore_config; } tmp102->hwmon_dev = hwmon_dev; - tmp102->tz = thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, - &tmp102_of_thermal_ops); - if (IS_ERR(tmp102->tz)) - tmp102->tz = NULL; + devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, + &tmp102_of_thermal_ops); dev_info(dev, "initialized\n"); @@ -251,7 +248,6 @@ static int tmp102_remove(struct i2c_client *client) { struct tmp102 *tmp102 = i2c_get_clientdata(client); - thermal_zone_of_sensor_unregister(tmp102->hwmon_dev, tmp102->tz); hwmon_device_unregister(tmp102->hwmon_dev); /* Stop monitoring if device was stopped originally */ diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c index 485794376ee5..d07dd29d4848 100644 --- a/drivers/input/touchscreen/sun4i-ts.c +++ b/drivers/input/touchscreen/sun4i-ts.c @@ -115,7 +115,6 @@ struct sun4i_ts_data { struct device *dev; struct input_dev *input; - struct thermal_zone_device *tz; void __iomem *base; unsigned int irq; bool ignore_fifo_data; @@ -366,10 +365,7 @@ static int sun4i_ts_probe(struct platform_device *pdev) if (IS_ERR(hwmon)) return PTR_ERR(hwmon); - ts->tz = thermal_zone_of_sensor_register(ts->dev, 0, ts, - &sun4i_ts_tz_ops); - if (IS_ERR(ts->tz)) - ts->tz = NULL; + devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops); writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC); @@ -377,7 +373,6 @@ static int sun4i_ts_probe(struct platform_device *pdev) error = input_register_device(ts->input); if (error) { writel(0, ts->base + TP_INT_FIFOC); - thermal_zone_of_sensor_unregister(ts->dev, ts->tz); return error; } } @@ -394,8 +389,6 @@ static int sun4i_ts_remove(struct platform_device *pdev) if (ts->input) input_unregister_device(ts->input); - thermal_zone_of_sensor_unregister(ts->dev, ts->tz); - /* Deactivate all IRQs */ writel(0, ts->base + TP_INT_FIFOC); diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index d89d60c8b6cf..2d702ca6556f 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -260,16 +260,6 @@ config ARMADA_THERMAL Enable this option if you want to have support for thermal management controller present in Armada 370 and Armada XP SoC. -config TEGRA_SOCTHERM - tristate "Tegra SOCTHERM thermal management" - depends on ARCH_TEGRA - help - Enable this option for integrated thermal management support on NVIDIA - Tegra124 systems-on-chip. The driver supports four thermal zones - (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal - zones to manage temperatures. This option is also required for the - emergency thermal reset (thermtrip) feature to function. - config DB8500_CPUFREQ_COOLING tristate "DB8500 cpufreq cooling" depends on ARCH_U8500 || COMPILE_TEST @@ -377,6 +367,17 @@ depends on ARCH_STI && OF source "drivers/thermal/st/Kconfig" endmenu +config TANGO_THERMAL + tristate "Tango thermal management" + depends on ARCH_TANGO || COMPILE_TEST + help + Enable the Tango thermal driver, which supports the primitive + temperature sensor embedded in Tango chips since the SMP8758. + This sensor only generates a 1-bit signal to indicate whether + the die temperature exceeds a programmable threshold. + +source "drivers/thermal/tegra/Kconfig" + config QCOM_SPMI_TEMP_ALARM tristate "Qualcomm SPMI PMIC Temperature Alarm" depends on OF && SPMI && IIO @@ -388,4 +389,14 @@ config QCOM_SPMI_TEMP_ALARM real time die temperature if an ADC is present or an estimate of the temperature based upon the over temperature stage value. +config GENERIC_ADC_THERMAL + tristate "Generic ADC based thermal sensor" + depends on IIO + help + This enabled a thermal sysfs driver for the temperature sensor + which is connected to the General Purpose ADC. The ADC channel + is read via IIO framework and the channel information is provided + to this driver. This driver reports the temperature by reading ADC + channel and converts it to temperature based on lookup table. + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 8e9cbc3b5679..10b07c14f8a9 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -35,6 +35,7 @@ obj-y += samsung/ obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o +obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o @@ -46,6 +47,7 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_ST_THERMAL) += st/ -obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o +obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o +obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c index 70836c5b89bc..fc52016d4e85 100644 --- a/drivers/thermal/gov_bang_bang.c +++ b/drivers/thermal/gov_bang_bang.c @@ -29,7 +29,13 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) struct thermal_instance *instance; tz->ops->get_trip_temp(tz, trip, &trip_temp); - tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + + if (!tz->ops->get_trip_hyst) { + pr_warn_once("Undefined get_trip_hyst for thermal zone %s - " + "running with default hysteresis zero\n", tz->type); + trip_hyst = 0; + } else + tz->ops->get_trip_hyst(tz, trip, &trip_hyst); dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n", trip, trip_temp, tz->temperature, diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 5e820b541506..97fad8f51e1c 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -160,7 +160,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) struct hisi_thermal_sensor *sensor = _sensor; struct hisi_thermal_data *data = sensor->thermal; - int sensor_id = 0, i; + int sensor_id = -1, i; long max_temp = 0; *temp = hisi_thermal_get_sensor_temp(data, sensor); @@ -168,12 +168,19 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) sensor->sensor_temp = *temp; for (i = 0; i < HISI_MAX_SENSORS; i++) { + if (!data->sensors[i].tzd) + continue; + if (data->sensors[i].sensor_temp >= max_temp) { max_temp = data->sensors[i].sensor_temp; sensor_id = i; } } + /* If no sensor has been enabled, then skip to enable irq */ + if (sensor_id == -1) + return 0; + mutex_lock(&data->thermal_lock); data->irq_bind_sensor = sensor_id; mutex_unlock(&data->thermal_lock); @@ -226,8 +233,12 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) sensor->thres_temp / 1000); mutex_unlock(&data->thermal_lock); - for (i = 0; i < HISI_MAX_SENSORS; i++) + for (i = 0; i < HISI_MAX_SENSORS; i++) { + if (!data->sensors[i].tzd) + continue; + thermal_zone_device_update(data->sensors[i].tzd); + } return IRQ_HANDLED; } @@ -243,10 +254,11 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev, sensor->id = index; sensor->thermal = data; - sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, sensor->id, - sensor, &hisi_of_thermal_ops); + sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, + sensor->id, sensor, &hisi_of_thermal_ops); if (IS_ERR(sensor->tzd)) { |