diff options
45 files changed, 85 insertions, 85 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/H1940.txt b/Documentation/arm/Samsung-S3C24XX/H1940.txt index d6b1de92b111..f4a7b22c8664 100644 --- a/Documentation/arm/Samsung-S3C24XX/H1940.txt +++ b/Documentation/arm/Samsung-S3C24XX/H1940.txt @@ -23,7 +23,7 @@ Support http://handhelds.org/moin/moin.cgi/HpIpaqH1940 - Herbert Pötzl pages: + Herbert Pötzl pages: http://vserver.13thfloor.at/H1940/ @@ -32,7 +32,7 @@ Maintainers ----------- This project is being maintained and developed by a variety - of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl. + of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl. Thanks to the many others who have also provided support. diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b index 3572b98f45b8..b714183d4125 100644 --- a/Documentation/auxdisplay/cfag12864b +++ b/Documentation/auxdisplay/cfag12864b @@ -78,9 +78,9 @@ Select (17)------------------------------(16) Data / Instruction Ground (18)---[GND] [+5v]---(19) LED + Ground (19)---[GND] Ground (20)---[GND] E A Values: -Ground (21)---[GND] [GND]---[P1]---(18) Vee · R = Resistor = 22 ohm -Ground (22)---[GND] | · P1 = Preset = 10 Kohm -Ground (23)---[GND] ---- S ------( 3) V0 · P2 = Preset = 1 Kohm +Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm +Ground (22)---[GND] | - P1 = Preset = 10 Kohm +Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm Ground (24)---[GND] | | Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED - diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt index d097f09ee15a..f609ebf9c78f 100644 --- a/Documentation/binfmt_misc.txt +++ b/Documentation/binfmt_misc.txt @@ -113,4 +113,4 @@ cause unexpected behaviour and can be a security hazard. There is a web page about binfmt_misc at http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html -Richard Günther <rguenth@tat.physik.uni-tuebingen.de> +Richard Günther <rguenth@tat.physik.uni-tuebingen.de> diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.txt index 9b84b805ab75..a2ac6d294793 100644 --- a/Documentation/crypto/api-intro.txt +++ b/Documentation/crypto/api-intro.txt @@ -177,7 +177,7 @@ Portions of this API were derived from the following projects: and; Nettle (http://www.lysator.liu.se/~nisse/nettle/) - Niels Möller + Niels Möller Original developers of the crypto algorithms: @@ -200,8 +200,8 @@ SHA1 algorithm contributors: DES algorithm contributors: Raimar Falke - Gisle Sælensminde - Niels Möller + Gisle Sælensminde + Niels Möller Blowfish algorithm contributors: Herbert Valerio Riedel diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index 46b78b7331c2..bf2a9cdfe7bb 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -228,5 +228,5 @@ Patches, comments and suggestions are very very welcome. Ulf Hermenau for helping me out with traditional chinese. - André Smoktun and Christian Frömmel for supporting me with + André Smoktun and Christian Frömmel for supporting me with hardware and listening to my problems very patiently. diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index 4c33cced5f65..4865addebe1c 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -66,7 +66,7 @@ Michael Dreher <michael@5dot1.de> Andreas 'randy' Weinberger for the support of the Fujitsu-Siemens Activy budget DVB-S -Kenneth Aafløy <ke-aa@frisurf.no> +Kenneth Aafløy <ke-aa@frisurf.no> for adding support for Typhoon DVB-S budget card Ernst Peinlich <e.peinlich@inode.at> diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt index 610e7801207b..b3e3a0356839 100644 --- a/Documentation/fb/framebuffer.txt +++ b/Documentation/fb/framebuffer.txt @@ -215,11 +215,11 @@ vertical retrace time is the sum of the upper margin, the lower margin and the vsync length. +----------+---------------------------------------------+----------+-------+ - | | ^ | | | + | | ↑ | | | | | |upper_margin | | | - | | ¥ | | | + | | ↓ | | | +----------###############################################----------+-------+ - | # ^ # | | + | # ↑ # | | | # | # | | | # | # | | | # | # | | @@ -238,15 +238,15 @@ vsync length. | # | # | | | # | # | | | # | # | | - | # ¥ # | | + | # ↓ # | | +----------###############################################----------+-------+ - | | ^ | | | + | | ↑ | | | | | |lower_margin | | | - | | ¥ | | | + | | ↓ | | | +----------+---------------------------------------------+----------+-------+ - | | ^ | | | + | | ↑ | | | | | |vsync_len | | | - | | ¥ | | | + | | ↓ | | | +----------+---------------------------------------------+----------+-------+ The frame buffer device expects all horizontal timings in number of dotclocks diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt index df27f5bf15db..550ca775a4cb 100644 --- a/Documentation/fb/sstfb.txt +++ b/Documentation/fb/sstfb.txt @@ -2,9 +2,9 @@ Introduction This is a frame buffer device driver for 3dfx' Voodoo Graphics - (aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based + (aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based video boards. It's highly experimental code, but is guaranteed to work - on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards, + on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards, and with me "between chair and keyboard". Some people tested other combinations and it seems that it works. The main page is located at <http://sstfb.sourceforge.net>, and if diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026 index 473c689d7924..f4327db2307e 100644 --- a/Documentation/hwmon/adm1026 +++ b/Documentation/hwmon/adm1026 @@ -80,7 +80,7 @@ temperature sensor inputs. Both the PWM output and the DAC output can be used to control fan speed. Usually only one of these two outputs will be used. Write the minimum PWM or DAC value to the appropriate control register. Then set the low temperature limit in the tmin values for each -temperature sensor. The range of control is fixed at 20 °C, and the +temperature sensor. The range of control is fixed at 20 °C, and the largest difference between current and tmin of the temperature sensors sets the control output. See the datasheet for several example circuits for controlling fan speed with the PWM and DAC outputs. The fan speed sensors diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm index ce0881883bca..229f8b789185 100644 --- a/Documentation/hwmon/gl518sm +++ b/Documentation/hwmon/gl518sm @@ -13,7 +13,7 @@ Supported chips: Authors: Frodo Looijaard <frodol@dds.nl>, - Kyösti Mälkki <kmalkki@cc.hut.fi> + Kyösti Mälkki <kmalkki@cc.hut.fi> Hong-Gunn Chew <hglinux@gunnet.org> Jean Delvare <khali@linux-fr.org> diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83 index f7aad1489cb0..a04d1fe9269c 100644 --- a/Documentation/hwmon/lm83 +++ b/Documentation/hwmon/lm83 @@ -45,7 +45,7 @@ Unconfirmed motherboards: The LM82 is confirmed to have been found on most AMD Geode reference designs and test platforms. -The driver has been successfully tested by Magnus Forsström, who I'd +The driver has been successfully tested by Magnus Forsström, who I'd like to thank here. More testers will be of course welcome. The fact that the LM83 is only scarcely used can be easily explained. diff --git a/Documentation/hwmon/sis5595 b/Documentation/hwmon/sis5595 index b7ae36b8cdf5..4f8877a34f37 100644 --- a/Documentation/hwmon/sis5595 +++ b/Documentation/hwmon/sis5595 @@ -8,7 +8,7 @@ Supported chips: Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. Authors: - Kyösti Mälkki <kmalkki@cc.hut.fi>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com>, Aurelien Jarno <aurelien@aurel32.net> 2.6 port diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index a936fb3824b2..d651b25f7519 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -8,7 +8,7 @@ Supported chips: Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/) Authors: - Kyösti Mälkki <kmalkki@cc.hut.fi>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> Bob Dougherty <bobd@stanford.edu> (Some conversion-factor data were contributed by diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d index 8171c285bb55..14a668ed8aaa 100644 --- a/Documentation/hwmon/w83792d +++ b/Documentation/hwmon/w83792d @@ -107,7 +107,7 @@ Known problems: by CR[0x49h]. - The function of vid and vrm has not been finished, because I'm NOT very familiar with them. Adding support is welcome. - - The function of chassis open detection needs more tests. + - The function of chassis open detection needs more tests. - If you have ASUS server board and chip was not found: Then you will need to upgrade to latest (or beta) BIOS. If it does not help please contact us. diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 index 83c3b9743c3c..778210ee1583 100644 --- a/Documentation/i2c/busses/i2c-i810 +++ b/Documentation/i2c/busses/i2c-i810 @@ -7,7 +7,7 @@ Supported adapters: Authors: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, Ralph Metzler <rjkm@thp.uni-koeln.de>, Mark D. Studebaker <mdsxyz123@yahoo.com> diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x index 08d7b2dac69a..266481fd26e2 100644 --- a/Documentation/i2c/busses/i2c-sis96x +++ b/Documentation/i2c/busses/i2c-sis96x @@ -60,7 +60,7 @@ Mark D. Studebaker <mdsxyz123@yahoo.com> - design hints and bug fixes Alexander Maylsh <amalysh@web.de> - ditto, plus an important datasheet... almost the one I really wanted -Hans-Günter Lütke Uphues <hg_lu@t-online.de> +Hans-Günter Lütke Uphues <hg_lu@t-online.de> - patch for SiS735 Robert Zwerus <arzie@dds.nl> - testing for SiS645DX diff --git a/Documentation/i2c/busses/i2c-via b/Documentation/i2c/busses/i2c-via index 55edfe1a640b..343870661ac3 100644 --- a/Documentation/i2c/busses/i2c-via +++ b/Documentation/i2c/busses/i2c-via @@ -4,7 +4,7 @@ Supported adapters: * VIA Technologies, InC. VT82C586B Datasheet: Publicly available at the VIA website -Author: Kyösti Mälkki <kmalkki@cc.hut.fi> +Author: Kyösti Mälkki <kmalkki@cc.hut.fi> Description ----------- diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 775f489e86f6..06b4be3ef6d8 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -17,7 +17,7 @@ Supported adapters: Datasheet: available on request and under NDA from VIA Authors: - Kyösti Mälkki <kmalkki@cc.hut.fi>, + Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <khali@linux-fr.org> diff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol index b4022c914210..579b92d5f3a3 100644 --- a/Documentation/i2c/i2c-protocol +++ b/Documentation/i2c/i2c-protocol @@ -68,7 +68,7 @@ We have found some I2C devices that needs the following modifications: Flags I2C_M_IGNORE_NAK Normally message is interrupted immediately if there is [NA] from the - client. Setting this flag treats any [NA] as [A], and all of + client. Setting this flag treats any [NA] as [A], and all of message is sent. These messages may still fail to SCL lo->hi timeout. diff --git a/Documentation/i2o/README b/Documentation/i2o/README index 9aa6ddb446eb..0ebf58c73f54 100644 --- a/Documentation/i2o/README +++ b/Documentation/i2o/README @@ -30,13 +30,13 @@ Juha Sievanen, University of Helsinki Finland Bug fixes Core code extensions -Auvo Häkkinen, University of Helsinki Finland +Auvo Häkkinen, University of Helsinki Finland LAN OSM code /Proc interface to LAN class Bug fixes Core code extensions -Taneli Vähäkangas, University of Helsinki Finland +Taneli Vähäkangas, University of Helsinki Finland Fixes to i2o_config CREDITS diff --git a/Documentation/isdn/CREDITS b/Documentation/isdn/CREDITS index e1b3023efaa8..7c17c837064f 100644 --- a/Documentation/isdn/CREDITS +++ b/Documentation/isdn/CREDITS @@ -2,7 +2,7 @@ I want to thank all who contributed to this project and especially to: (in alphabetical order) -Thomas Bogendörfer (tsbogend@bigbug.franken.de) +Thomas Bogendörfer (tsbogend@bigbug.franken.de) Tester, lots of bugfixes and hints. Alan Cox (alan@redhat.com) @@ -11,7 +11,7 @@ Alan Cox (alan@redhat.com) Henner Eisen (eis@baty.hanse.de) For X.25 implementation. -Volker Götz (volker@oops.franken.de) +Volker Götz (volker@oops.franken.de) For contribution of man-pages, the imontty-tool and a perfect maintaining of the mailing-list at hub-wue. diff --git a/Documentation/isdn/README b/Documentation/isdn/README index 761595243931..6783437f21c2 100644 --- a/Documentation/isdn/README +++ b/Documentation/isdn/README @@ -402,7 +402,7 @@ README for the ISDN-subsystem the script tools/tcltk/isdnmon. You can add actions for line-status changes. See the comments at the beginning of the script for how to do that. There are other tty-based tools in the tools-subdirectory - contributed by Michael Knigge (imon), Volker Götz (imontty) and + contributed by Michael Knigge (imon), Volker Götz (imontty) and Andreas Kool (isdnmon). l) For initial testing, you can set the verbose-level to 2 (default: 0). diff --git a/Documentation/isdn/README.icn b/Documentation/isdn/README.icn index a5f55eadb3ca..13f833d4e910 100644 --- a/Documentation/isdn/README.icn +++ b/Documentation/isdn/README.icn @@ -3,8 +3,8 @@ $Id: README.icn,v 1.7 2000/08/06 09:22:51 armin Exp $ You can get the ICN-ISDN-card from: Thinking Objects Software GmbH -Versbacher Röthe 159 -97078 Würzburg +Versbacher Röthe 159 +97078 Würzburg Tel: +49 931 2877950 Fax: +49 931 2877951 diff --git a/Documentation/java.txt b/Documentation/java.txt index c768dc63b34e..3cce3fbb6644 100644 --- a/Documentation/java.txt +++ b/Documentation/java.txt @@ -390,7 +390,7 @@ the execution bit, then just do originally by Brian A. Lantz, brian@lantz.com -heavily edited for binfmt_misc by Richard Günther +heavily edited for binfmt_misc by Richard Günther new scripts by Colin J. Watson <cjw44@cam.ac.uk> added executable Jar file support by Kurt Huwig <kurt@iku-netz.de> diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index c68dafeda7a7..d9e3b199929b 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -236,7 +236,7 @@ * Title: "Design and Implementation of the Second Extended Filesystem" - Author: Rémy Card, Theodore Ts'o, Stephen Tweedie. + Author: Rémy Card, Theodore Ts'o, Stephen Tweedie. URL: http://web.mit.edu/tytso/www/linux/ext2intro.html Keywords: ext2, linux fs history, inode, directory, link, devices, VFS, physical structure, performance, benchmarks, ext2fs library, diff --git a/Documentation/m68k/README.buddha b/Documentation/m68k/README.buddha index ef484a719bb9..3ea9827ba3c7 100644 --- a/Documentation/m68k/README.buddha +++ b/Documentation/m68k/README.buddha @@ -204,7 +204,7 @@ always shows a "no IRQ here" on the Buddha, and accesses to the third IDE port are going into data's Nirwana on the Buddha. - Jens Schönfeld february 19th, 1997 + Jens Schönfeld february 19th, 1997 updated may 27th, 1997 eMail: sysop@nostlgic.tng.oche.de diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt index 48ed2b711bd2..d0777a1200e1 100644 --- a/Documentation/networking/6pack.txt +++ b/Documentation/networking/6pack.txt @@ -1,6 +1,6 @@ This is the 6pack-mini-HOWTO, written by -Andreas Könsgen DG3KQ +Andreas Könsgen DG3KQ Internet: ajk@iehk.rwth-aachen.de AMPR-net: dg3kq@db0pra.ampr.org AX.25: dg3kq@db0ach.#nrw.deu.eu diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 5a232d946be3..db0cd5169581 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -13,7 +13,7 @@ You can find the latest version of this document at Please send me your comments to - Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es> + Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es> ------------------------------------------------------------------------------- + Why use PACKET_MMAP diff --git a/Documentation/networking/slicecom.hun b/Documentation/networking/slicecom.hun index 5acf1918694a..bed2f045e550 100644 --- a/Documentation/networking/slicecom.hun +++ b/Documentation/networking/slicecom.hun @@ -1,7 +1,7 @@ SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz -Bartók István <bartoki@itc.hu> +Bartók István <bartoki@itc.hu> Utolso modositas: Wed Aug 29 17:26:58 CEST 2001 ----------------------------------------------------------------- diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt index 32d3b916afad..c82c0cf981b4 100644 --- a/Documentation/networking/slicecom.txt +++ b/Documentation/networking/slicecom.txt @@ -1,9 +1,9 @@ SliceCOM adapter user's documentation - for the 0.51 driver version -Written by Bartók István <bartoki@itc.hu> +Written by Bartók István <bartoki@itc.hu> -English translation: Lakatos György <gyuri@itc.hu> +English translation: Lakatos György <gyuri@itc.hu> Mon Dec 11 15:28:42 CET 2000 Last modified: Wed Aug 29 17:25:37 CEST 2001 diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt index c169a57bc925..1f73e13058df 100644 --- a/Documentation/networking/tms380tr.txt +++ b/Documentation/networking/tms380tr.txt @@ -71,24 +71,24 @@ Below find attached the setting for the SK NET TR 4/16 ISA adapters CHAPTER 1 LOCATION OF DIP-SWITCH ============================================================== -UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ -þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ -þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ -þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿ -þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ -þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU -þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ -þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿ -þAÄÄÄÄÄÄU þ þ þ þ -þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ -þ þ þ -þ AÄU -þ þ -þ þ -þ þ -þ þ -AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU - AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU +UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ +þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ +þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ +þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿ +þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ +þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU +þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ +þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿ +þAÄÄÄÄÄÄU þ þ þ þ +þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ +þ þ þ +þ AÄU +þ þ +þ þ +þ þ +þ þ +AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU + AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU ============================================================== CHAPTER 2 DEFAULT SETTINGS @@ -108,9 +108,9 @@ AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU CHAPTER 3 DIP SWITCH W1 DESCRIPTION ============================================================== - UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON - þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ - AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF + UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON + þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ + AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF |AD | BootROM Addr. | I/O | +-+-+-------+-------+-----+-----+ | | | diff --git a/Documentation/pcieaer-howto.txt b/Documentation/pcieaer-howto.txt index 16c251230c82..d5da86170106 100644 --- a/Documentation/pcieaer-howto.txt +++ b/Documentation/pcieaer-howto.txt @@ -13,7 +13,7 @@ Reporting (AER) driver and provides information on how to use it, as well as how to enable the drivers of endpoint devices to conform with PCI Express AER driver. -1.2 Copyright © Intel Corporation 2006. +1.2 Copyright © Intel Corporation 2006. 1.3 What is the PCI Express AER Driver? diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index c55bd5079b90..5b8d6953f05e 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -48,7 +48,7 @@ before suspend (it is limited to 500 MB by default). Article about goals and implementation of Software Suspend for Linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Author: G‚ábor Kuti +Author: G‚ábor Kuti Last revised: 2003-10-20 by Pavel Machek Idea and goals to achieve |