diff options
74 files changed, 1921 insertions, 901 deletions
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file mode 100644 index 000000000000..a388005842ad --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -0,0 +1,47 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; + diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt index e8f1d627d288..69dc5d57b1ef 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt @@ -3,9 +3,8 @@ Required properties: - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", "fsl,imx7d-qspi", "fsl,imx6ul-qspi", - "fsl,ls1021a-qspi" + "fsl,ls1021a-qspi", "fsl,ls2080a-qspi" or - "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi", "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length @@ -34,7 +33,11 @@ qspi0: quadspi@40044000 { clock-names = "qspi_en", "qspi"; flash0: s25fl128s@0 { - .... + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index c0f6c8ecfa2e..3a8079eb18c8 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -5,6 +5,7 @@ Required properties: - mediatek,mt2701-spi: for mt2701 platforms - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt6765-spi: for mt6765 platforms - mediatek,mt7622-spi: for mt7622 platforms - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms - mediatek,mt8135-spi: for mt8135 platforms diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt index 8de589b376ce..2567c829e2dc 100644 --- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt +++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt @@ -25,18 +25,23 @@ data by ADI software channels at the same time, or two parallel routine of setti ADI registers will make ADI controller registers chaos to lead incorrect results. Then we need one hardware spinlock to synchronize between the multiple subsystems. +The new version ADI controller supplies multiple master channels for different +subsystem accessing, that means no need to add hardware spinlock to synchronize, +thus change the hardware spinlock support to be optional to keep backward +compatibility. + Required properties: - compatible: Should be "sprd,sc9860-adi". - reg: Offset and length of ADI-SPI controller register space. -- hwlocks: Reference to a phandle of a hwlock provider node. -- hwlock-names: Reference to hwlock name strings defined in the same order - as the hwlocks, should be "adi". - #address-cells: Number of cells required to define a chip select address on the ADI-SPI bus. Should be set to 1. - #size-cells: Size of cells required to define a chip select address size on the ADI-SPI bus. Should be set to 0. Optional properties: +- hwlocks: Reference to a phandle of a hwlock provider node. +- hwlock-names: Reference to hwlock name strings defined in the same order + as the hwlocks, should be "adi". - sprd,hw-channels: This is an array of channel values up to 49 channels. The first value specifies the hardware channel id which is used to transfer data triggered by hardware automatically, and the second diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 1f0da76a39de..7b7280c21ee0 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -103,7 +103,7 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { }; static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { - .dev_id = "ep93xx-spi.0", + .dev_id = "spi0", .table = { GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), { }, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index e2658e22bba1..8a53b74dc4b2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -73,7 +73,7 @@ static struct spi_board_info simone_spi_devices[] __initdata = { * v1.3 parts will still work, since the signal on SFRMOUT is automatic. */ static struct gpiod_lookup_table simone_spi_cs_gpio_table = { - .dev_id = "ep93xx-spi.0", + .dev_id = "spi0", .table = { GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW), { }, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 582e06e104fd..e0e1b11032f1 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -267,7 +267,7 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = { * goes through CPLD */ static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { - .dev_id = "ep93xx-spi.0", + .dev_id = "spi0", .table = { GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), { }, @@ -316,7 +316,7 @@ static struct spi_board_info ts72xx_spi_devices[] __initdata = { }; static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { - .dev_id = "ep93xx-spi.0", + .dev_id = "spi0", .table = { /* DIO_17 */ GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index a88a1d807b32..cbcba3136d74 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -242,7 +242,7 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }; static struct gpiod_lookup_table vision_spi_cs_gpio_table = { - .dev_id = "ep93xx-spi.0", + .dev_id = "spi0", .table = { GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c index 8101ff2f05c1..67100e4e1083 100644 --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -37,10 +37,19 @@ #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 #define BCM2835_DMA_CHAN_NAME_SIZE 8 +/** + * struct bcm2835_dmadev - BCM2835 DMA controller + * @ddev: DMA device + * @base: base address of register map + * @dma_parms: DMA parameters (to convey 1 GByte max segment size to clients) + * @zero_page: bus address of zero page (to detect transactions copying from + * zero page and avoid accessing memory if so) + */ struct bcm2835_dmadev { struct dma_device ddev; void __iomem *base; struct device_dma_parameters dma_parms; + dma_addr_t zero_page; }; struct bcm2835_dma_cb { @@ -687,11 +696,12 @@ static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( size_t period_len, enum dma_transfer_direction direction, unsigned long flags) { + struct bcm2835_dmadev *od = to_bcm2835_dma_dev(chan->device); struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); struct bcm2835_desc *d; dma_addr_t src, dst; u32 info = BCM2835_DMA_WAIT_RESP; - u32 extra = BCM2835_DMA_INT_EN; + u32 extra = 0; size_t max_len = bcm2835_dma_max_frame_length(c); size_t frames; @@ -707,6 +717,11 @@ static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( return NULL; } + if (flags & DMA_PREP_INTERRUPT) + extra |= BCM2835_DMA_INT_EN; + else + period_len = buf_len; + /* * warn if buf_len is not a multiple of period_len - this may leed * to unexpected latencies for interrupts and thus audiable clicks @@ -732,6 +747,10 @@ static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( dst = c->cfg.dst_addr; src = buf_addr; info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; + + /* non-lite channels can write zeroes w/o accessing memory */ + if (buf_addr == od->zero_page && !c->is_lite_channel) + info |= BCM2835_DMA_S_IGNORE; } /* calculate number of frames */ @@ -778,7 +797,10 @@ static int bcm2835_dma_terminate_all(struct dma_chan *chan) /* stop DMA activity */ if (c->desc) { - vchan_terminate_vdesc(&c->desc->vd); + if (c->desc->vd.tx.flags & DMA_PREP_INTERRUPT) + vchan_terminate_vdesc(&c->desc->vd); + else + vchan_vdesc_fini(&c->desc->vd); c->desc = NULL; bcm2835_dma_abort(c); } @@ -831,6 +853,9 @@ static void bcm2835_dma_free(struct bcm2835_dmadev *od) list_del(&c->vc.chan.device_node); tasklet_kill(&c->vc.task); } + + dma_unmap_page_attrs(od->ddev.dev, od->zero_page, PAGE_SIZE, + DMA_TO_DEVICE, DMA_ATTR_SKIP_CPU_SYNC); } static const struct of_device_id bcm2835_dma_of_match[] = { @@ -907,11 +932,20 @@ static int bcm2835_dma_probe(struct platform_device *pdev) od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | BIT(DMA_MEM_TO_MEM); od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; + od->ddev.descriptor_reuse = true; od->ddev.dev = &pdev->dev; INIT_LIST_HEAD(&od->ddev.channels); platform_set_drvdata(pdev, od); + od->zero_page = dma_map_page_attrs(od->ddev.dev, ZERO_PAGE(0), 0, + PAGE_SIZE, DMA_TO_DEVICE, + DMA_ATTR_SKIP_CPU_SYNC); + if (dma_mapping_error(od->ddev.dev, od->zero_page)) { + dev_err(&pdev->dev, "Failed to map zero page\n"); + return -ENOMEM; + } + /* Request DMA channel mask from device tree */ if (of_property_read_u32(pdev->dev.of_node, "brcm,dma-channel-mask", diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c index 006a8ff64057..714306bc3f79 100644 --- a/drivers/platform/chrome/cros_ec_spi.c +++ b/drivers/platform/chrome/cros_ec_spi.c @@ -706,7 +706,7 @@ static int cros_ec_spi_devm_high_pri_alloc(struct device *dev, struct cros_ec_spi *ec_spi) { struct sched_param sched_priority = { - .sched_priority = MAX_RT_PRIO - 1, + .sched_priority = MAX_RT_PRIO / 2, }; int err; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3a1d8f1170de..6ee514fd0920 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -433,6 +433,16 @@ config SPI_MT7621 help This selects a driver for the MediaTek MT7621 SPI Controller. +config SPI_NPCM_FIU + tristate "Nuvoton NPCM FLASH Interface Unit" + depends on ARCH_NPCM || COMPILE_TEST + depends on OF && HAS_IOMEM + help + This enables support for the Flash Interface Unit SPI controller + in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config SPI_NPCM_PSPI tristate "Nuvoton NPCM PSPI Controller" depends on ARCH_NPCM || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 63dcab552bcb..adbebee93a75 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o +obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 6a7d7b553d95..fd8007ebb145 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -526,7 +526,6 @@ static int atmel_qspi_probe(struct platform_device *pdev) /* Request the IRQ */ irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(&pdev->dev, "missing IRQ\n"); err = irq; goto disable_qspick; } diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index ea160f117f88..41d71ba7fd32 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -170,7 +170,6 @@ static int altera_spi_probe(struct platform_device *pdev) { struct altera_spi *hw; struct spi_master *master; - struct resource *res; int err = -ENODEV; master = spi_alloc_master(&pdev->dev, sizeof(struct altera_spi)); @@ -189,8 +188,7 @@ static int altera_spi_probe(struct platform_device *pdev) hw = spi_master_get_devdata(master); /* find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hw->base = devm_ioremap_resource(&pdev->dev, res); + hw->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hw->base)) { err = PTR_ERR(hw->base); goto exit; diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 032888344822..e450ee17787f 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -817,7 +817,6 @@ static int a3700_spi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *of_node = dev->of_node; - struct resource *res; struct spi_master *master; struct a3700_spi *spi; u32 num_cs = 0; @@ -855,8 +854,7 @@ static int a3700_spi_probe(struct platform_device *pdev) spi->master = master; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - spi->base = devm_ioremap_resource(dev, res); + spi->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(spi->base)) { ret = PTR_ERR(spi->base); goto error; @@ -864,7 +862,6 @@ static int a3700_spi_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "could not get irq: %d\n", irq); ret = -ENXIO; goto error; } diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 032a615e4ccd..eb9a243e9526 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -139,7 +139,6 @@ static int ath79_spi_probe(struct platform_device *pdev) struct spi_master *master; struct ath79_spi *sp; struct ath79_spi_platform_data *pdata; - struct resource *r; unsigned long rate; int ret; @@ -169,8 +168,7 @@ static int ath79_spi_probe(struct platform_device *pdev) sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; sp->bitbang.flags = SPI_CS_HIGH; - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sp->base = devm_ioremap_resource(&pdev->dev, r); + sp->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(sp->base)) { ret = PTR_ERR(sp->base); goto err_put_master; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index f00b367523cd..acf318e7330c 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -23,6 +23,7 @@ #include <linux/gpio/consumer.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> +#include <trace/events/spi.h> /* SPI register offsets */ #define SPI_CR 0x0000 @@ -1409,9 +1410,13 @@ static int atmel_spi_transfer_one_message(struct spi_master *master, msg->actual_length = 0; list_for_each_entry(xfer, &msg->transfers, transfer_list) { + trace_spi_transfer_start(msg, xfer); + ret = atmel_spi_one_transfer(master, msg, xfer); if (ret) goto msg_done; + + trace_spi_transfer_stop(msg, xfer); } if (as->use_pdc) diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 3b1833e6c7ad..74842f6019ed 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -460,7 +460,6 @@ static int spi_engine_probe(struct platform_device *pdev) struct spi_engine *spi_engine; struct spi_master *master; unsigned int version; - struct resource *res; int irq; int ret; @@ -480,8 +479,7 @@ static int spi_engine_probe(struct platform_device *pdev) spin_lock_init(&spi_engine->lock); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - spi_engine->base = devm_ioremap_resource(&pdev->dev, res); + spi_engine->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(spi_engine->base)) { ret = PTR_ERR(spi_engine->base); goto err_put_master; diff --git a/drivers/s |