diff options
37 files changed, 3084 insertions, 124 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index e7b5c49702bb..b799bcf67d7b 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1028,6 +1028,12 @@ specified address. The serial port must already be setup and configured. Options are not yet supported. + rda,<addr> + Start an early, polled-mode console on a serial port + of an RDA Micro SoC, such as RDA8810PL, at the + specified address. The serial port must already be + setup and configured. Options are not yet supported. + smh Use ARM semihosting calls for early console. s3c2410,<addr> diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt new file mode 100644 index 000000000000..43c80762c428 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.txt @@ -0,0 +1,17 @@ +RDA Micro platforms device tree bindings +---------------------------------------- + +RDA8810PL SoC +============= + +Required root node properties: + + - compatible : must contain "rda,8810pl" + + +Boards: + +Root node property compatible must contain, depending on board: + + - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" + - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt new file mode 100644 index 000000000000..d56615fd343a --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt @@ -0,0 +1,47 @@ +Device tree bindings for ARM PL353 static memory controller + +PL353 static memory controller supports two kinds of memory +interfaces.i.e NAND and SRAM/NOR interfaces. +The actual devices are instantiated from the child nodes of pl353 smc node. + +Required properties: +- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell". +- reg : Controller registers map and length. +- clock-names : List of input clock names - "memclk", "apb_pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). +- address-cells : Must be 2. +- size-cells : Must be 1. + +Child nodes: + For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are +supported as child nodes. + +for NAND partition information please refer the below file +Documentation/devicetree/bindings/mtd/partition.txt + +Example: + smcc: memory-controller@e000e000 + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + reg = <0xe000e000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region + 0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region + 0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region + nand_0: flash@e1000000 { + compatible = "arm,pl353-nand-r2p1" + reg = <0 0 0x1000000>; + (...) + }; + nor0: flash@e2000000 { + compatible = "cfi-flash"; + reg = <1 0 0x2000000>; + }; + nor1: flash@e4000000 { + compatible = "cfi-flash"; + reg = <2 0 0x2000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..a08df97a69e6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,17 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. +- clocks : Phandle to the input clock. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 3bbe3b87a1ff..389508584f48 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -325,6 +325,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International raspberrypi Raspberry Pi Foundation raydium Raydium Semiconductor Corp. +rda Unisoc Communications, Inc. realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation richtek Richtek Technology Corporation diff --git a/MAINTAINERS b/MAINTAINERS index 99113b9fcdd2..58551782e960 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1540,6 +1540,7 @@ F: arch/arm/mach-imx/ F: arch/arm/mach-mxs/ F: arch/arm/boot/dts/imx* F: arch/arm/configs/imx*_defconfig +F: arch/arm64/boot/dts/freescale/imx* F: drivers/clk/imx/ F: drivers/firmware/imx/ F: drivers/soc/imx/ @@ -1967,6 +1968,20 @@ M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/RDA MICRO ARCHITECTURE +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-unisoc@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/boot/dts/rda8810pl-* +F: drivers/clocksource/timer-rda.c +F: drivers/irqchip/irq-rda-intc.c +F: drivers/tty/serial/rda-uart.c +F: Documentation/devicetree/bindings/arm/rda.txt +F: Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt +F: Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt +F: Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt + ARM/REALTEK ARCHITECTURE M: Andreas Färber <afaerber@suse.de> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c1227757817b..664e918e2624 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -787,6 +787,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-qcom/Kconfig" +source "arch/arm/mach-rda/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0436002d5091..9db3c584b2cb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -202,6 +202,7 @@ machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom +machine-$(CONFIG_ARCH_RDA) += rda machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 78551c4375d5..bd40148a15b2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -822,6 +822,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb +dtb-$(CONFIG_ARCH_RDA) += \ + rda8810pl-orangepi-2g-iot.dtb \ + rda8810pl-orangepi-i96.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ arm-realview-pb11mp.dtb \ diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts new file mode 100644 index 000000000000..98e34248ae80 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "rda8810pl.dtsi" + +/ { + compatible = "xunlong,orangepi-2g-iot", "rda,8810pl"; + model = "Orange Pi 2G-IoT"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial2:921600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts new file mode 100644 index 000000000000..728f76931b99 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "rda8810pl.dtsi" + +/ { + compatible = "xunlong,orangepi-i96", "rda,8810pl"; + model = "Orange Pi i96"; + + aliases { + serial0 = &uart2; + serial1 = &uart1; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial2:921600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi new file mode 100644 index 000000000000..19cde895bf65 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * RDA8810PL SoC + * + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "rda,8810pl"; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0x0>; + }; + }; + + sram@100000 { + compatible = "mmio-sram"; + reg = <0x100000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + apb@20800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20800000 0x100000>; + + intc: interrupt-controller@0 { + compatible = "rda,8810pl-intc"; + reg = <0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + apb@20900000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20900000 0x100000>; + + timer@10000 { + compatible = "rda,8810pl-timer"; + reg = <0x10000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; + }; + + apb@20a00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20a00000 0x100000>; + + uart1: serial@0 { + compatible = "rda,8810pl-uart"; + reg = <0x0 0x1000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@10000 { + compatible = "rda,8810pl-uart"; + reg = <0x10000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@90000 { + compatible = "rda,8810pl-uart"; + reg = <0x90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + l2: cache-controller@21100000 { + compatible = "arm,pl310-cache"; + reg = <0x21100000 0x1000>; + cache-unified; + cache-level = <2>; + }; +}; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f29f49a9f36c..5bee34a7ff2e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -867,6 +867,7 @@ CONFIG_STM32_DMA=y CONFIG_STM32_DMAMUX=y CONFIG_STM32_MDMA=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_UNIPHIER_MDMAC=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_DW_DMAC=y diff --git a/arch/arm/mach-rda/Kconfig b/arch/arm/mach-rda/Kconfig new file mode 100644 index 000000000000..4df8b8ee1a9d --- /dev/null +++ b/arch/arm/mach-rda/Kconfig @@ -0,0 +1,7 @@ +menuconfig ARCH_RDA + bool "RDA Micro SoCs" + depends on ARCH_MULTI_V7 + select RDA_INTC + select RDA_TIMER + help + This enables support for the RDA Micro 8810PL SoC family. diff --git a/arch/arm/mach-rda/Makefile b/arch/arm/mach-rda/Makefile new file mode 100644 index 000000000000..6bea3d3a2dd7 --- /dev/null +++ b/arch/arm/mach-rda/Makefile @@ -0,0 +1 @@ +obj- += dummy.o diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile index acb330916333..f85ff059cfba 100644 --- a/arch/arm/mach-sti/Makefile +++ b/arch/arm/mach-sti/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S deleted file mode 100644 index e0ad451700d5..000000000000 --- a/arch/arm/mach-sti/headsmp.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-sti/headsmp.S - * - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * http://www.st.com - * - * Cloned from linux/arch/arm/mach-vexpress/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * ST specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(sti_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(sti_secondary_startup) - -1: .long . - .long pen_release diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index 231f19e17436..d0272a839ffb 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -28,82 +28,33 @@ #include "smp.h" -static void write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - sync_cache_w(&pen_release); -} - -static DEFINE_SPINLOCK(boot_lock); - -static void sti_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} +static u32 __iomem *cpu_strt_ptr; static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); + unsigned long entry_pa = __pa_symbol(secondary_startup); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. + * Secondary CPU is initialised and started by a U-BOOTROM firmware. + * Secondary CPU is spinning and waiting for a write at cpu_strt_ptr. + * Writing secondary_startup address at cpu_strt_ptr makes it to + * jump directly to secondary_startup(). */ - write_pen_release(cpu_logical_map(cpu)); + __raw_writel(entry_pa, cpu_strt_ptr); - /* - * Send the secondary CPU a soft interrupt, thereby causing - * it to jump to the secondary entrypoint. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); + /* wmb so that data is actually written before cache flush is done */ + smp_wmb(); + sync_cache_w(cpu_strt_ptr); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } static void __init sti_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *np; void __iomem *scu_base; - u32 __iomem *cpu_strt_ptr; u32 release_phys; int cpu; - unsigned long entry_pa = __pa_symbol(sti_secondary_startup); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); @@ -131,8 +82,8 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) } /* - * holding pen is usually configured in SBC DMEM but can also be - * in RAM. + * cpu-release-addr is usually configured in SBC DMEM but can + * also be in RAM. */ if (!memblock_is_memory(release_phys)) @@ -142,22 +93,11 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) cpu_strt_ptr = (u32 __iomem *)phys_to_virt(release_phys); - __raw_writel(entry_pa, cpu_strt_ptr); - - /* - * wmb so that data is actually written - * before cache flush is done - */ - smp_wmb(); - sync_cache_w(cpu_strt_ptr); - - if (!memblock_is_memory(release_phys)) - iounmap(cpu_strt_ptr); + set_cpu_possible(cpu, true); } } const struct smp_operations sti_smp_ops __initconst = { .smp_prepare_cpus = sti_smp_prepare_cpus, - .smp_secondary_init = sti_secondary_init, .smp_boot_secondary = sti_boot_secondary, }; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 28f052185eb6..251ecf34cb02 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -142,6 +142,14 @@ config ARCH_MVEBU - Armada 7K SoC Family - Armada 8K SoC Family +config ARCH_MXC + bool "ARMv8 based NXP i.MX SoC family" + select ARM64_ERRATUM_843419 + select ARM64_ERRATUM_845719 + help + This enables support for the ARMv8 based SoCs in the + NXP i.MX family. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index f3ed4c078ba5..d88e2f0e179a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1202,6 +1202,20 @@ status = "okay"; }; +&serial_3 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "extclk"; + }; +}; + &spi_1 { cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 84446f95b2eb..e7cd3b67d818 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -544,6 +544,21 @@ power-domains = <&pd_cam1>; }; + cmu_imem: clock-controller@11060000 { + compatible = "samsung,exynos5433-cmu-imem"; + reg = <0x11060000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_imem_sssx_266", + "aclk_imem_266", + "aclk_imem_200"; + clocks = <&xxti>, + <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_200>; + }; + pd_gscl: power-domain@105c4000 { compatible = "samsung,exynos5433-pd"; reg = <0x105c4000 0x20>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 7748e6dfc3c9..f9be2426f83c 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -18,3 +18,5 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb + +dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts new file mode 100644 index 000000000000..64acccc4bfcb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 NXP + * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "NXP i.MX8MQ EVK"; + compatible = "fsl,imx8mq-evk", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0xc0000000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; |