diff options
37 files changed, 483 insertions, 498 deletions
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt new file mode 100644 index 000000000000..af84cce5cd7b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mux.txt @@ -0,0 +1,60 @@ +Common i2c bus multiplexer/switch properties. + +An i2c bus multiplexer/switch will have several child busses that are +numbered uniquely in a device dependent manner. The nodes for an i2c bus +multiplexer/switch will have one child node for each child +bus. + +Required properties: +- #address-cells = <1>; +- #size-cells = <0>; + +Required properties for child nodes: +- #address-cells = <1>; +- #size-cells = <0>; +- reg : The sub-bus number. + +Optional properties for child nodes: +- Other properties specific to the multiplexer/switch hardware. +- Child nodes conforming to i2c bus binding + + +Example : + + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + + mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio1: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio2: gpio@38 { + compatible = "nxp,pca8574"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt index 38832c712919..b6cb5a12c672 100644 --- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt @@ -6,14 +6,18 @@ Required properties: - compatible: value should be either of the following. (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. + (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used + inside HDMIPHY block found on several samsung SoCs - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. - - gpios: The order of the gpios should be the following: <SDA, SCL>. - The gpio specifier depends on the gpio controller. Optional properties: + - gpios: The order of the gpios should be the following: <SDA, SCL>. + The gpio specifier depends on the gpio controller. Required in all + cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output + lines are permanently wired to the respective client - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt new file mode 100644 index 000000000000..ceabbe91ae44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xiic.txt @@ -0,0 +1,22 @@ +Xilinx IIC controller: + +Required properties: +- compatible : Must be "xlnx,xps-iic-2.00.a" +- reg : IIC register location and length +- interrupts : IIC controller unterrupt +- #address-cells = <1> +- #size-cells = <0> + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio index 811cd78d4cdc..bd9b2299b739 100644 --- a/Documentation/i2c/muxes/gpio-i2cmux +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -1,11 +1,11 @@ -Kernel driver gpio-i2cmux +Kernel driver i2c-gpio-mux Author: Peter Korsgaard <peter.korsgaard@barco.com> Description ----------- -gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments from a master I2C bus and a hardware MUX controlled through GPIO pins. E.G.: @@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N. Usage ----- -gpio-i2cmux uses the platform bus, so you need to provide a struct +i2c-gpio-mux uses the platform bus, so you need to provide a struct platform_device with the platform_data pointing to a struct gpio_i2cmux_platform_data with the I2C adapter number of the master bus, the number of bus segments to create and the GPIO pins used -to control it. See include/linux/gpio-i2cmux.h for details. +to control it. See include/linux/i2c-gpio-mux.h for details. E.G. something like this for a MUX providing 4 bus segments controlled through 3 GPIO pins: -#include <linux/gpio-i2cmux.h> +#include <linux/i2c-gpio-mux.h> #include <linux/platform_device.h> static const unsigned myboard_gpiomux_gpios[] = { @@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { }; static struct platform_device myboard_i2cmux = { - .name = "gpio-i2cmux", + .name = "i2c-gpio-mux", .id = 0, .dev = { .platform_data = &myboard_i2cmux_data, diff --git a/MAINTAINERS b/MAINTAINERS index daa31999b2a1..6f90c64a2539 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2988,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER M: Peter Korsgaard <peter.korsgaard@barco.com> L: linux-i2c@vger.kernel.org S: Supported -F: drivers/i2c/muxes/gpio-i2cmux.c -F: include/linux/gpio-i2cmux.h -F: Documentation/i2c/muxes/gpio-i2cmux +F: drivers/i2c/muxes/i2c-mux-gpio.c +F: include/linux/i2c-mux-gpio.h +F: Documentation/i2c/muxes/i2c-mux-gpio GENERIC HDLC (WAN) DRIVERS M: Krzysztof Halasa <khc@pm.waw.pl> @@ -5148,7 +5148,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER M: Guenter Roeck <guenter.roeck@ericsson.com> L: linux-i2c@vger.kernel.org S: Maintained -F: drivers/i2c/muxes/pca9541.c +F: drivers/i2c/muxes/i2c-mux-pca9541.c PCA9564/PCA9665 I2C BUS DRIVER M: Wolfram Sang <w.sang@pengutronix.de> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5f13c62e64b4..5a3bb3d738d8 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -49,7 +49,6 @@ config I2C_CHARDEV config I2C_MUX tristate "I2C bus multiplexing support" - depends on EXPERIMENTAL help Say Y here if you want the I2C core to support the ability to handle multiplexed I2C bus topologies, by presenting each diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index eec2cf57539a..7244c8be6063 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -445,20 +445,6 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. -config I2C_IXP2000 - tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" - depends on ARCH_IXP2000 - select I2C_ALGOBIT - help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based - system and are using GPIO lines for an I2C bus. - - This support is also available as a module. If so, the module - will be called i2c-ixp2000. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - instead. - config I2C_MPC tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" depends on PPC diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 569567b0d027..ce3c2be7fb40 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o -obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index a76d85fa3ad7..79b4bcb3b85c 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct platform_device *pdev) dev->clk = NULL; davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); - free_irq(IRQ_I2C, dev); + free_irq(dev->irq, dev); iounmap(dev->base); kfree(dev); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index df8799241009..1e48bec80edf 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -164,9 +164,15 @@ static char *abort_sources[] = { u32 dw_readl(struct dw_i2c_dev *dev, int offset) { - u32 value = readl(dev->base + offset); + u32 value; - if (dev->swab) + if (dev->accessor_flags & ACCESS_16BIT) + value = readw(dev->base + offset) | + (readw(dev->base + offset + 2) << 16); + else + value = readl(dev->base + offset); + + if (dev->accessor_flags & ACCESS_SWAP) return swab32(value); else return value; @@ -174,10 +180,15 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset) void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) { - if (dev->swab) + if (dev->accessor_flags & ACCESS_SWAP) b = swab32(b); - writel(b, dev->base + offset); + if (dev->accessor_flags & ACCESS_16BIT) { + writew((u16)b, dev->base + offset); + writew((u16)(b >> 16), dev->base + offset + 2); + } else { + writel(b, dev->base + offset); + } } static u32 @@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev) input_clock_khz = dev->get_clk_rate_khz(dev); - /* Configure register endianess access */ reg = dw_readl(dev, DW_IC_COMP_TYPE); if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) { - dev->swab = 1; - reg = DW_IC_COMP_TYPE_VALUE; - } - - if (reg != DW_IC_COMP_TYPE_VALUE) { + /* Configure register endianess access */ + dev->accessor_flags |= ACCESS_SWAP; + } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) { + /* Configure register access mode 16bit */ + dev->accessor_flags |= ACCESS_16BIT; + } else if (reg != DW_IC_COMP_TYPE_VALUE) { dev_err(dev->dev, "Unknown Synopsys component type: " "0x%08x\n", reg); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 02d1a2ddd853..9c1840ee09c7 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -82,7 +82,7 @@ struct dw_i2c_dev { unsigned int status; u32 abort_source; int irq; - int swab; + u32 accessor_flags; struct i2c_adapter adapter; u32 functionality; u32 master_cfg; @@ -90,6 +90,9 @@ struct dw_i2c_dev { unsigned int rx_fifo_depth; }; +#define ACCESS_SWAP 0x00000001 +#define ACCESS_16BIT 0x00000002 + extern u32 dw_readl(struct dw_i2c_dev *dev, int offset); extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); extern int i2c_dw_init(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4ba589ab8614..0506fef8dc00 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -36,6 +36,7 @@ #include <linux/interrupt.h> #include <linux/of_i2c.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/io.h> #include <linux/slab.h> #include "i2c-designware-core.h" @@ -95,7 +96,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) r = -ENODEV; goto err_free_mem; } - clk_enable(dev->clk); + clk_prepare_enable(dev->clk); dev->functionality = I2C_FUNC_I2C | @@ -155,7 +156,7 @@ err_free_irq: err_iounmap: iounmap(dev->base); err_unuse_clocks: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; err_free_mem: @@ -177,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); put_device(&pdev->dev); - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); clk_put(dev->clk); dev->clk = NULL; @@ -198,6 +199,31 @@ static const struct of_device_id dw_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #endif +#ifdef CONFIG_PM +static int dw_i2c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); + + clk_disable_unprepare(i_dev->clk); + + return 0; +} + +static int dw_i2c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); + + clk_prepare_enable(i_dev->clk); + i2c_dw_init(i_dev); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware"); @@ -207,6 +233,7 @@ static struct platform_driver dw_i2c_driver = { .name = "i2c_designware", .owner = THIS_MODULE, .of_match_table = of_match_ptr(dw_i2c_of_match), + .pm = &dw_i2c_dev_pm_ops, }, }; diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index c811289b61e2..2f74ae872e1e 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -263,11 +263,6 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap) init_waitqueue_head(&pch_event); } -static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) -{ - return cmp1.tv64 < cmp2.tv64; -} - /** * pch_i2c_wait_for_bus_idle() - check the status of bus. * @adap: Pointer to struct i2c_algo_pch_data. @@ -317,33 +312,6 @@ static void pch_i2c_start(struct i2c_algo_pch_data *adap) } /** - * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event - * @adap: Pointer to struct i2c_algo_pch_data. - */ -static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) -{ - long ret; - ret = wait_event_timeout(pch_event, - (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); - - if (ret == 0) { - pch_err(adap, "timeout: %x\n", adap->pch_event_flag); - adap->pch_event_flag = 0; - return -ETIMEDOUT; - } - - if (adap->pch_event_flag & I2C_ERROR_MASK) { - pch_err(adap, "error bits set: %x\n", adap->pch_event_flag); - adap->pch_event_flag = 0; - return -EIO; - } - - adap->pch_event_flag = 0; - - return 0; -} - -/** * pch_i2c_getack() - to confirm ACK/NACK * @adap: Pointer to struct i2c_algo_pch_data. */ @@ -373,6 +341,40 @@ static void pch_i2c_stop(struct i2c_algo_pch_data *adap) pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); } +static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap) +{ + long ret; + + ret = wait_event_timeout(pch_event, + (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); + if (!ret) { + pch_err(adap, "%s:wait-event timeout\n", __func__); + adap->pch_event_flag = 0; + pch_i2c_stop(adap); + pch_i2c_init(adap); + return -ETIMEDOUT; + } + + if (adap->pch_event_flag & I2C_ERROR_MASK) { + pch_err(adap, "Lost Arbitration\n"); + adap->pch_event_flag = 0; + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); + pch_i2c_init(adap); + return -EAGAIN; + } + + adap->pch_event_flag = 0; + + if (pch_i2c_getack(adap)) { + pch_dbg(adap, "Receive NACK for slave address" + "setting\n"); + return -EIO; + } + + return 0; +} + /** * pch_i2c_repstart() - generate repeated start condition in normal mode * @adap: Pointer to struct i2c_algo_pch_data. @@ -427,27 +429,12 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_8_lsb = (addr & I2C_ADDR_MSK); - iowrite32(addr_8_lsb, p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_8_lsb = (addr & I2C_ADDR_MSK); + iowrite32(addr_8_lsb, p + PCH_I2CDR); } else { /* set 7 bit slave address and R/W bit as 0 */ iowrite32(addr << 1, p + PCH_I2CDR); @@ -455,44 +442,21 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, pch_i2c_start(adap); } - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; for (wrcount = 0; wrcount < length; ++wrcount) { /* write buffer value to I2C data register */ iowrite32(buf[wrcount], p + PCH_I2CDR); pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMCF_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT); + pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); } /* check if this is the last message */ @@ -580,50 +544,21 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_8_lsb = (addr & I2C_ADDR_MSK); - iowrite32(addr_8_lsb, p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_8_lsb = (addr & I2C_ADDR_MSK); + iowrite32(addr_8_lsb, p + PCH_I2CDR); + pch_i2c_restart(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - addr_2_msb |= I2C_RD; - iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, - p + PCH_I2CDR); - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, - I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; + + addr_2_msb |= I2C_RD; + iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR); } else { /* 7 address bits + R/W bit */ addr = (((addr) << 1) | (I2C_RD)); @@ -634,23 +569,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (first) pch_i2c_start(adap); - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave address" - "setting\n"); - return -EIO; - } - } else if (rtn == -EIO) { /* Arbitration Lost */ - pch_err(adap, "Lost Arbitration\n"); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT); - pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT); - pch_i2c_init(adap); - return -EAGAIN; - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; if (length == 0) { pch_i2c_stop(adap); @@ -669,18 +590,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (loop != 1) read_index++; - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave" - "address setting\n"); - return -EIO; - } - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } - + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; } /* end for */ pch_i2c_sendnack(adap); @@ -690,17 +602,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, if (length != 1) read_index++; - rtn = pch_i2c_wait_for_xfer_complete(adap); - if (rtn == 0) { - if (pch_i2c_getack(adap)) { - pch_dbg(adap, "Receive NACK for slave" - "address setting\n"); - return -EIO; - } - } else { /* wait-event timeout */ - pch_i2c_stop(adap); - return -ETIME; - } + rtn = pch_i2c_wait_for_check_xfer(adap); + if (rtn) + return rtn; if (last) pch_i2c_stop(adap); @@ -790,7 +694,7 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, ret = mutex_lock_interruptible(&pch_mutex); if (ret) - return -ERESTARTSYS; + return ret; if (adap->p_adapter_info->pch_i2c_suspended) { mutex_unlock(&pch_mutex); @@ -909,7 +813,7 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, pch_adap->owner = THIS_MODULE; pch_adap->class = I2C_CLASS_HWMON; - strcpy(pch_adap->name, KBUILD_MODNAME); + strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name)); pch_adap->algo = &pch_algorithm; pch_adap->algo_data = &adap_info->pch_data[i]; @@ -963,7 +867,7 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev) pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address); for (i = 0; i < adap_info->ch_num; i++) - adap_info->pch_data[i].pch_base_address = 0; + adap_info->pch_data[i].pch_base_address = NULL; pci_set_drvdata(pdev, NULL); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index c0330a41db03..e62d2d938628 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -190,12 +190,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; - /* - * If "dev->id" is negative we consider it as zero. - * The reason to do so is to avoid sysfs names that only make - * sense when there are multiple adapters. - */ - adap->nr = (pdev->id != -1) ? pdev->id : 0; + adap->nr = pdev->id; ret = i2c_bit_add_numbered_bus(adap); if (ret) goto err_add_bus; diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 56bce9a8bcbb..8d6b504d65c4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -512,7 +512,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) } /* Setup i2c_imx driver structure */ - strcpy(i2c_imx->adapter.name, pdev->name); + strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name)); i2c_imx->adapter.owner = THIS_MODULE; i2c_imx->adapter.algo = &i2c_imx_algo; i2c_imx->adapter.dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c deleted file mode 100644 index 5d263f9014d6..000000000000 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * drivers/i2c/busses/i2c-ixp2000.c - * - * I2C adapter for IXP2000 systems using GPIOs for I2C bus - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com> - * Made generic by: Jeff Daly <jeffrey.daly@intel.com> - * - * Copyright (c) 2003-2004 MontaVista Software Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * From Jeff Daly: |