diff options
68 files changed, 15347 insertions, 364 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd new file mode 100644 index 000000000000..f4be46cc6cb6 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -0,0 +1,171 @@ +What: sys/bus/dsa/devices/dsa<m>/cdev_major +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The major number that the character device driver assigned to + this device. + +What: sys/bus/dsa/devices/dsa<m>/errors +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The error information for this device. + +What: sys/bus/dsa/devices/dsa<m>/max_batch_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The largest number of work descriptors in a batch. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue size supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_engines +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of engines supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_groups +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of groups can be created under this device. + +What: sys/bus/dsa/devices/dsa<m>/max_tokens +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The total number of bandwidth tokens supported by this device. + The bandwidth tokens represent resources within the DSA + implementation, and these resources are allocated by engines to + support operations. + +What: sys/bus/dsa/devices/dsa<m>/max_transfer_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of bytes to be read from the source address to + perform the operation. The maximum transfer size is dependent on + the workqueue the descriptor was submitted to. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue number that this device supports. + +What: sys/bus/dsa/devices/dsa<m>/numa_node +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The numa node number for this device. + +What: sys/bus/dsa/devices/dsa<m>/op_cap +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The operation capability bit mask specify the operation types + supported by the this device. + +What: sys/bus/dsa/devices/dsa<m>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The state information of this device. It can be either enabled + or disabled. + +What: sys/bus/dsa/devices/dsa<m>/group<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned group under this device. + +What: sys/bus/dsa/devices/dsa<m>/engine<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned engine under this device. + +What: sys/bus/dsa/devices/dsa<m>/wq<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned work queue under this device. + +What: sys/bus/dsa/devices/dsa<m>/configurable +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: To indicate if this device is configurable or not. + +What: sys/bus/dsa/devices/dsa<m>/token_limit +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of bandwidth tokens that may be in use at + one time by operations that access low bandwidth memory in the + device. + +What: sys/bus/dsa/devices/wq<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group id that this work queue belongs to. + +What: sys/bus/dsa/devices/wq<m>.<n>/size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue size for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/type +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The type of this work queue, it can be "kernel" type for work + queue usages in the kernel space or "user" type for work queue + usages by applications in user space. + +What: sys/bus/dsa/devices/wq<m>.<n>/cdev_minor +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The minor number assigned to this work queue by the character + device driver. + +What: sys/bus/dsa/devices/wq<m>.<n>/mode +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue mode type for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/priority +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The priority value of this work queue, it is a vlue relative to + other work queue in the same group to control quality of service + for dispatching work from multiple workqueues in the same group. + +What: sys/bus/dsa/devices/wq<m>.<n>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The current state of the work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/threshold +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of entries in this work queue that may be filled + via a limited portal. + +What: sys/bus/dsa/devices/engine<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group that this engine belongs to. diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index 29dd3ccb1235..e77b08ebcd06 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -10,6 +10,7 @@ Required properties: - compatible : - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC - "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp + - "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC - reg : Specifies base physical address(s) and size of the eDMA registers. The 1st region is eDMA control register's address and size. The 2nd and the 3rd regions are programmable channel multiplexing diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 9d8bbac27d8b..c9e97409e853 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -10,6 +10,9 @@ Required properties: "fsl,imx6q-sdma" "fsl,imx7d-sdma" "fsl,imx8mq-sdma" + "fsl,imx8mm-sdma" + "fsl,imx8mn-sdma" + "fsl,imx8mp-sdma" The -to variants should be preferred since they allow to determine the correct ROM script addresses needed for the driver to work without additional firmware. diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt index ec89782d9498..3459e77be294 100644 --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt @@ -1,4 +1,4 @@ -* Ingenic JZ4780 DMA Controller +* Ingenic XBurst DMA Controller Required properties: @@ -8,10 +8,12 @@ Required properties: * ingenic,jz4770-dma * ingenic,jz4780-dma * ingenic,x1000-dma + * ingenic,x1830-dma - reg: Should contain the DMA channel registers location and length, followed by the DMA controller registers location and length. - interrupts: Should contain the interrupt specifier of the DMA controller. -- clocks: Should contain a clock specifier for the JZ4780/X1000 PDMA clock. +- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA + clock. - #dma-cells: Must be <2>. Number of integer cells in the dmas property of DMA clients (see below). diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 5551e929fd99..b7f81c63be8b 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -30,6 +30,7 @@ Required Properties: - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) - "renesas,dmac-r8a7796" (R-Car M3-W) + - "renesas,dmac-r8a77961" (R-Car M3-W+) - "renesas,dmac-r8a77965" (R-Car M3-N) - "renesas,dmac-r8a77970" (R-Car V3M) - "renesas,dmac-r8a77980" (R-Car V3H) diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml new file mode 100644 index 000000000000..8b5c346f23f6 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@ti.com> + +description: | + The UDMA-P is intended to perform similar (but significantly upgraded) + functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P + module supports the transmission and reception of various packet types. + The UDMA-P architecture facilitates the segmentation and reassembly of SoC DMA + data structure compliant packets to/from smaller data blocks that are natively + compatible with the specific requirements of each connected peripheral. + Multiple Tx and Rx channels are provided within the DMA which allow multiple + segmentation or reassembly operations to be ongoing. The DMA controller + maintains state information for each of the channels which allows packet + segmentation and reassembly operations to be time division multiplexed between + channels in order to share the underlying DMA hardware. An external DMA + scheduler is used to control the ordering and rate at which this multiplexing + occurs for Transmit operations. The ordering and rate of Receive operations + is indirectly controlled by the order in which blocks are pushed into the DMA + on the Rx PSI-L interface. + + The UDMA-P also supports acting as both a UTC and UDMA-C for its internal + channels. Channels in the UDMA-P can be configured to be either Packet-Based + or Third-Party channels on a channel by channel basis. + + All transfers within NAVSS is done between PSI-L source and destination + threads. + The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or + legacy, non PSI-L native peripherals. In the later case a special, small PDMA + is tasked to act as a bridge between the PSI-L fabric and the legacy + peripheral. + + PDMAs can be configured via UDMAP peer registers to match with the + configuration of the legacy peripheral. + +allOf: + - $ref: "../dma-controller.yaml#" + +properties: + "#dma-cells": + const: 1 + description: | + The cell is the PSI-L thread ID of the remote (to UDMAP) end. + Valid ranges for thread ID depends on the data movement direction: + for source thread IDs (rx): 0 - 0x7fff + for destination thread IDs (tx): 0x8000 - 0xffff + + Please refer to the device documentation for the PSI-L thread map and also + the PSI-L peripheral chapter for the correct thread ID. + + compatible: + enum: + - ti,am654-navss-main-udmap + - ti,am654-navss-mcu-udmap + - ti,j721e-navss-main-udmap + - ti,j721e-navss-mcu-udmap + + reg: + maxItems: 3 + + reg-names: + items: + - const: gcfg + - const: rchanrt + - const: tchanrt + + msi-parent: true + + ti,sci: + description: phandle to TI-SCI compatible System controller node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + ti,sci-dev-id: + description: TI-SCI device id of UDMAP + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + ti,ringacc: + description: phandle to the ring accelerator node + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle + + ti,sci-rm-range-tchan: + description: | + Array of UDMA tchan resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + + ti,sci-rm-range-rchan: + description: | + Array of UDMA rchan resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + + ti,sci-rm-range-rflow: + description: | + Array of UDMA rflow resource subtypes for resource allocation for this + host + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + # Should be enough + maxItems: 255 + +required: + - compatible + - "#dma-cells" + - reg + - reg-names + - msi-parent + - ti,sci + - ti,sci-dev-id + - ti,ringacc + - ti,sci-rm-range-tchan + - ti,sci-rm-range-rchan + - ti,sci-rm-range-rflow + +examples: + - |+ + cbass_main { + #address-cells = <2>; + #size-cells = <2>; + + cbass_main_navss: navss@30800000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + dma-ranges; + ranges; + + ti,sci-dev-id = <118>; + + main_udmap: dma-controller@31150000 { + compatible = "ti,am654-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + #dma-cells = <1>; + + ti,ringacc = <&ringacc>; + + msi-parent = <&inta_main_udmass>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <188>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */ + <0x5>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ + }; + }; + + mcasp0: mcasp@02B00000 { + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + }; + + crypto: crypto@4E00000 { + compatible = "ti,sa2ul-crypto"; + + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt new file mode 100644 index 000000000000..59758ccce809 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt @@ -0,0 +1,59 @@ +* Texas Instruments K3 NavigatorSS Ring Accelerator + +The Ring Accelerator (RA) is a machine which converts read/write accesses +from/to a constant address into corresponding read/write accesses from/to a +circular data structure in memory. The RA eliminates the need for each DMA +controller which needs to access ring elements from having to know the current +state of the ring (base address, current offset). The DMA controller +performs a read or write access to a specific address range (which maps to the +source interface on the RA) and the RA replaces the address for the transaction +with a new address which corresponds to the head or tail element of the ring +(head for reads, tail for writes). + +The Ring Accelerator is a hardware module that is responsible for accelerating +management of the packet queues. The K3 SoCs can have more than one RA instances + +Required properties: +- compatible : Must be "ti,am654-navss-ringacc"; +- reg : Should contain register location and length of the following + named register regions. +- reg-names : should be + "rt" - The RA Ring Real-time Control/Status Registers + "fifos" - The RA Queues Registers + "proxy_gcfg" - The RA Proxy Global Config Registers + "proxy_target" - The RA Proxy Datapath Registers +- ti,num-rings : Number of rings supported by RA +- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range +- ti,sci : phandle on TI-SCI compatible System controller node +- ti,sci-dev-id : TI-SCI device id of the ring accelerator +- msi-parent : phandle for "ti,sci-inta" interrupt controller + +Optional properties: + -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability + issue software w/a + +Example: + +ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", + "proxy_gcfg", "proxy_target"; + ti,num-rings = <818>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <187>; + msi-parent = <&inta_main_udmass>; +}; + +client: + +dma_ipx: dma_ipx@<addr> { + ... + ti,ringacc = <&ringacc>; + ... +} diff --git a/Documentation/driver-api/dmaengine/client.rst b/Documentation/driver-api/dmaengine/client.rst index 45953f171500..a9a7a3c84c63 100644 --- a/Documentation/driver-api/dmaengine/client.rst +++ b/Documentation/driver-api/dmaengine/client.rst @@ -151,6 +151,93 @@ The details of these operations are: Note that callbacks will always be invoked from the DMA engines tasklet, never from interrupt context. + Optional: per descriptor metadata + --------------------------------- + DMAengine provides two ways for metadata support. + + DESC_METADATA_CLIENT + + The metadata buffer is allocated/provided by the client driver and it is + attached to the descriptor. + + .. code-block:: c + + int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc, + void *data, size_t len); + + DESC_METADATA_ENGINE + + The metadata buffer is allocated/managed by the DMA driver. The client + driver can ask for the pointer, maximum size and the currently used size of + the metadata and can directly update or read it. + + Becasue the DMA driver manages the memory area containing the metadata, + clients must make sure that they do not try to access or get the pointer + after |