diff options
-rw-r--r-- | drivers/phy/rockchip/phy-rockchip-emmc.c | 33 |
1 files changed, 11 insertions, 22 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c index b0d10934413f..b237360f95f6 100644 --- a/drivers/phy/rockchip/phy-rockchip-emmc.c +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c @@ -79,6 +79,9 @@ #define PHYCTRL_IS_CALDONE(x) \ ((((x) >> PHYCTRL_CALDONE_SHIFT) & \ PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE) +#define PHYCTRL_IS_DLLRDY(x) \ + ((((x) >> PHYCTRL_DLLRDY_SHIFT) & \ + PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE) struct rockchip_emmc_phy { unsigned int reg_offset; @@ -93,7 +96,6 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) unsigned int dllrdy; unsigned int freqsel = PHYCTRL_FREQSEL_200M; unsigned long rate; - unsigned long timeout; int ret; /* @@ -217,28 +219,15 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) * NOTE: There appear to be corner cases where the DLL seems to take * extra long to lock for reasons that aren't understood. In some * extreme cases we've seen it take up to over 10ms (!). We'll be - * generous and give it 50ms. We still busy wait here because: - * - In most cases it should be super fast. - * - This is not called lots during normal operation so it shouldn't - * be a power or performance problem to busy wait. We expect it - * only at boot / resume. In both cases, eMMC is probably on the - * critical path so busy waiting a little extra time should be OK. + * generous and give it 50ms. */ - timeout = jiffies + msecs_to_jiffies(50); - do { - udelay(1); - - regmap_read(rk_phy->reg_base, - rk_phy->reg_offset + GRF_EMMCPHY_STATUS, - &dllrdy); - dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; - if (dllrdy == PHYCTRL_DLLRDY_DONE) - break; - } while (!time_after(jiffies, timeout)); - - if (dllrdy != PHYCTRL_DLLRDY_DONE) { - pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); - return -ETIMEDOUT; + ret = regmap_read_poll_timeout(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + dllrdy, PHYCTRL_IS_DLLRDY(dllrdy), + 0, 50 * USEC_PER_MSEC); + if (ret) { + pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret); + return ret; } return 0; |