diff options
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-common.c | 275 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 143 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-master.c (renamed from drivers/i2c/busses/i2c-designware-core.c) | 367 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-pcidrv.c | 9 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 6 |
6 files changed, 433 insertions, 368 deletions
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 30b60855fbcd..c89a4314c563 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o +i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c new file mode 100644 index 000000000000..0d0ccb73f0e6 --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -0,0 +1,275 @@ +/* + * Synopsys DesignWare I2C adapter driver. + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * ---------------------------------------------------------------------------- + * + */ +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> + +#include "i2c-designware-core.h" + +static char *abort_sources[] = { + [ABRT_7B_ADDR_NOACK] = + "slave address not acknowledged (7bit mode)", + [ABRT_10ADDR1_NOACK] = + "first address byte not acknowledged (10bit mode)", + [ABRT_10ADDR2_NOACK] = + "second address byte not acknowledged (10bit mode)", + [ABRT_TXDATA_NOACK] = + "data not acknowledged", + [ABRT_GCALL_NOACK] = + "no acknowledgement for a general call", + [ABRT_GCALL_READ] = + "read after general call", + [ABRT_SBYTE_ACKDET] = + "start byte acknowledged", + [ABRT_SBYTE_NORSTRT] = + "trying to send start byte when restart is disabled", + [ABRT_10B_RD_NORSTRT] = + "trying to read when restart is disabled (10bit mode)", + [ABRT_MASTER_DIS] = + "trying to use disabled adapter", + [ARB_LOST] = + "lost arbitration", +}; + +u32 dw_readl(struct dw_i2c_dev *dev, int offset) +{ + u32 value; + + if (dev->flags & ACCESS_16BIT) + value = readw_relaxed(dev->base + offset) | + (readw_relaxed(dev->base + offset + 2) << 16); + else + value = readl_relaxed(dev->base + offset); + + if (dev->flags & ACCESS_SWAP) + return swab32(value); + else + return value; +} + +void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +{ + if (dev->flags & ACCESS_SWAP) + b = swab32(b); + + if (dev->flags & ACCESS_16BIT) { + writew_relaxed((u16)b, dev->base + offset); + writew_relaxed((u16)(b >> 16), dev->base + offset + 2); + } else { + writel_relaxed(b, dev->base + offset); + } +} + +u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) +{ + /* + * DesignWare I2C core doesn't seem to have solid strategy to meet + * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec + * will result in violation of the tHD;STA spec. + */ + if (cond) + /* + * Conditional expression: + * + * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH + * + * This is based on the DW manuals, and represents an ideal + * configuration. The resulting I2C bus speed will be + * faster than any of the others. + * + * If your hardware is free from tHD;STA issue, try this one. + */ + return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset; + else + /* + * Conditional expression: + * + * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf) + * + * This is just experimental rule; the tHD;STA period turned + * out to be proportinal to (_HCNT + 3). With this setting, + * we could meet both tHIGH and tHD;STA timing specs. + * + * If unsure, you'd better to take this alternative. + * + * The reason why we need to take into account "tf" here, + * is the same as described in i2c_dw_scl_lcnt(). + */ + return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000 + - 3 + offset; +} + +u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) +{ + /* + * Conditional expression: + * + * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf) + * + * DW I2C core starts counting the SCL CNTs for the LOW period + * of the SCL clock (tLOW) as soon as it pulls the SCL line. + * In order to meet the tLOW timing spec, we need to take into + * account the fall time of SCL signal (tf). Default tf value + * should be 0.3 us, for safety. + */ + return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset; +} + +void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) +{ + dw_writel(dev, enable, DW_IC_ENABLE); +} + +void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable) +{ + int timeout = 100; + + do { + __i2c_dw_enable(dev, enable); + if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable) + return; + + /* + * Wait 10 times the signaling period of the highest I2C + * transfer supported by the driver (for 400KHz this is + * 25us) as described in the DesignWare I2C databook. + */ + usleep_range(25, 250); + } while (timeout--); + + dev_warn(dev->dev, "timeout in %sabling adapter\n", + enable ? "en" : "dis"); +} + +unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev) +{ + /* + * Clock is not necessary if we got LCNT/HCNT values directly from + * the platform code. + */ + if (WARN_ON_ONCE(!dev->get_clk_rate_khz)) + return 0; + return dev->get_clk_rate_khz(dev); +} + +int i2c_dw_acquire_lock(struct dw_i2c_dev *dev) +{ + int ret; + + if (!dev->acquire_lock) + return 0; + + ret = dev->acquire_lock(dev); + if (!ret) + return 0; + + dev_err(dev->dev, "couldn't acquire bus ownership\n"); + + return ret; +} + +void i2c_dw_release_lock(struct dw_i2c_dev *dev) +{ + if (dev->release_lock) + dev->release_lock(dev); +} + +/* + * Waiting for bus not busy + */ +int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) +{ + int timeout = TIMEOUT; + + while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { + if (timeout <= 0) { + dev_warn(dev->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + timeout--; + usleep_range(1000, 1100); + } + + return 0; +} + +int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) +{ + unsigned long abort_source = dev->abort_source; + int i; + + if (abort_source & DW_IC_TX_ABRT_NOACK) { + for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) + dev_dbg(dev->dev, + "%s: %s\n", __func__, abort_sources[i]); + return -EREMOTEIO; + } + + for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) + dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]); + + if (abort_source & DW_IC_TX_ARB_LOST) + return -EAGAIN; + else if (abort_source & DW_IC_TX_ABRT_GCALL_READ) + return -EINVAL; /* wrong msgs[] data */ + else + return -EIO; +} + +u32 i2c_dw_func(struct i2c_adapter *adap) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); + + return dev->functionality; +} + +void i2c_dw_disable(struct dw_i2c_dev *dev) +{ + /* Disable controller */ + __i2c_dw_enable_and_wait(dev, false); + + /* Disable all interupts */ + dw_writel(dev, 0, DW_IC_INTR_MASK); + dw_readl(dev, DW_IC_CLR_INTR); +} + +void i2c_dw_disable_int(struct dw_i2c_dev *dev) +{ + dw_writel(dev, 0, DW_IC_INTR_MASK); +} + +u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) +{ + return dw_readl(dev, DW_IC_COMP_PARAM_1); +} +EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); + +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index fe9b66898a72..661cfa869ff7 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -41,6 +41,124 @@ #define DW_IC_CON_RESTART_EN 0x20 #define DW_IC_CON_SLAVE_DISABLE 0x40 +/* + * Registers offset + */ +#define DW_IC_CON 0x0 +#define DW_IC_TAR 0x4 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_HS_SCL_HCNT 0x24 +#define DW_IC_HS_SCL_LCNT 0x28 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_SDA_HOLD 0x7c +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_ENABLE_STATUS 0x9c +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_VERSION 0xf8 +#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 + +#define DW_IC_INTR_RX_UNDER 0x001 +#define DW_IC_INTR_RX_OVER 0x002 +#define DW_IC_INTR_RX_FULL 0x004 +#define DW_IC_INTR_TX_OVER 0x008 +#define DW_IC_INTR_TX_EMPTY 0x010 +#define DW_IC_INTR_RD_REQ 0x020 +#define DW_IC_INTR_TX_ABRT 0x040 +#define DW_IC_INTR_RX_DONE 0x080 +#define DW_IC_INTR_ACTIVITY 0x100 +#define DW_IC_INTR_STOP_DET 0x200 +#define DW_IC_INTR_START_DET 0x400 +#define DW_IC_INTR_GEN_CALL 0x800 + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) +#define DW_IC_STATUS_ACTIVITY 0x1 +#define DW_IC_STATUS_TFE BIT(2) +#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) + +#define DW_IC_SDA_HOLD_RX_SHIFT 16 +#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) + +#define DW_IC_ERR_TX_ABRT 0x1 + +#define DW_IC_TAR_10BITADDR_MASTER BIT(12) + +#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) +#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) + +/* + * Status codes + */ +#define STATUS_IDLE 0x0 +#define STATUS_WRITE_IN_PROGRESS 0x1 +#define STATUS_READ_IN_PROGRESS 0x2 + +#define TIMEOUT 20 /* ms */ + +/* + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * + * Only expected abort codes are listed here + * refer to the datasheet for the full list + */ +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 + +#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) +#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) +#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) +#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) +#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) +#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) +#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) +#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) +#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) +#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) + +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) + /** * struct dw_i2c_dev - private i2c-designware data @@ -80,6 +198,9 @@ * @acquire_lock: function to acquire a hardware lock on the bus * @release_lock: function to release a hardware lock on the bus * @pm_disabled: true if power-management should be disabled for this i2c-bus + * @disable: function to disable the controller + * @disable_int: function to disable all interrupts + * @init: function to initialize the I2C hardware * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -129,6 +250,9 @@ struct dw_i2c_dev { int (*acquire_lock)(struct dw_i2c_dev *dev); void (*release_lock)(struct dw_i2c_dev *dev); bool pm_disabled; + void (*disable)(struct dw_i2c_dev *dev); + void (*disable_int)(struct dw_i2c_dev *dev); + int (*init)(struct dw_i2c_dev *dev); }; #define ACCESS_SWAP 0x00000001 @@ -137,9 +261,22 @@ struct dw_i2c_dev { #define MODEL_CHERRYTRAIL 0x00000100 -extern int i2c_dw_init(struct dw_i2c_dev *dev); -extern void i2c_dw_disable(struct dw_i2c_dev *dev); -extern void i2c_dw_disable_int(struct dw_i2c_dev *dev); +u32 dw_readl(struct dw_i2c_dev *dev, int offset); +void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); +u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); +u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable); +void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable); +unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev); +int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); +void i2c_dw_release_lock(struct dw_i2c_dev *dev); +int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); +int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); +u32 i2c_dw_func(struct i2c_adapter *adap); +void i2c_dw_disable(struct dw_i2c_dev *dev); +void i2c_dw_disable_int(struct dw_i2c_dev *dev); +int i2c_dw_init(struct dw_i2c_dev *dev); + extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); extern int i2c_dw_probe(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-master.c index e8a7621c187e..eefc4db1ee3e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -22,9 +22,9 @@ * */ #include <linux/delay.h> -#include <linux/export.h> -#include <linux/errno.h> #include <linux/err.h> +#include <linux/errno.h> +#include <linux/export.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -32,175 +32,6 @@ #include <linux/pm_runtime.h> #include "i2c-designware-core.h" -/* - * Registers offset - */ -#define DW_IC_CON 0x0 -#define DW_IC_TAR 0x4 -#define DW_IC_DATA_CMD 0x10 -#define DW_IC_SS_SCL_HCNT 0x14 -#define DW_IC_SS_SCL_LCNT 0x18 -#define DW_IC_FS_SCL_HCNT 0x1c -#define DW_IC_FS_SCL_LCNT 0x20 -#define DW_IC_HS_SCL_HCNT 0x24 -#define DW_IC_HS_SCL_LCNT 0x28 -#define DW_IC_INTR_STAT 0x2c -#define DW_IC_INTR_MASK 0x30 -#define DW_IC_RAW_INTR_STAT 0x34 -#define DW_IC_RX_TL 0x38 -#define DW_IC_TX_TL 0x3c -#define DW_IC_CLR_INTR 0x40 -#define DW_IC_CLR_RX_UNDER 0x44 -#define DW_IC_CLR_RX_OVER 0x48 -#define DW_IC_CLR_TX_OVER 0x4c -#define DW_IC_CLR_RD_REQ 0x50 -#define DW_IC_CLR_TX_ABRT 0x54 -#define DW_IC_CLR_RX_DONE 0x58 -#define DW_IC_CLR_ACTIVITY 0x5c -#define DW_IC_CLR_STOP_DET 0x60 -#define DW_IC_CLR_START_DET 0x64 -#define DW_IC_CLR_GEN_CALL 0x68 -#define DW_IC_ENABLE 0x6c -#define DW_IC_STATUS 0x70 -#define DW_IC_TXFLR 0x74 -#define DW_IC_RXFLR 0x78 -#define DW_IC_SDA_HOLD 0x7c -#define DW_IC_TX_ABRT_SOURCE 0x80 -#define DW_IC_ENABLE_STATUS 0x9c -#define DW_IC_COMP_PARAM_1 0xf4 -#define DW_IC_COMP_VERSION 0xf8 -#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A -#define DW_IC_COMP_TYPE 0xfc -#define DW_IC_COMP_TYPE_VALUE 0x44570140 - -#define DW_IC_INTR_RX_UNDER 0x001 -#define DW_IC_INTR_RX_OVER 0x002 -#define DW_IC_INTR_RX_FULL 0x004 -#define DW_IC_INTR_TX_OVER 0x008 -#define DW_IC_INTR_TX_EMPTY 0x010 -#define DW_IC_INTR_RD_REQ 0x020 -#define DW_IC_INTR_TX_ABRT 0x040 -#define DW_IC_INTR_RX_DONE 0x080 -#define DW_IC_INTR_ACTIVITY 0x100 -#define DW_IC_INTR_STOP_DET 0x200 -#define DW_IC_INTR_START_DET 0x400 -#define DW_IC_INTR_GEN_CALL 0x800 - -#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_ABRT | \ - DW_IC_INTR_STOP_DET) -#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ - DW_IC_INTR_TX_EMPTY) -#define DW_IC_STATUS_ACTIVITY 0x1 - -#define DW_IC_SDA_HOLD_RX_SHIFT 16 -#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) - -#define DW_IC_ERR_TX_ABRT 0x1 - -#define DW_IC_TAR_10BITADDR_MASTER BIT(12) - -#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) -#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) - -/* - * status codes - */ -#define STATUS_IDLE 0x0 -#define STATUS_WRITE_IN_PROGRESS 0x1 -#define STATUS_READ_IN_PROGRESS 0x2 - -#define TIMEOUT 20 /* ms */ - -/* - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register - * - * Only expected abort codes are listed here, - * refer to the datasheet for the full list. - */ -#define ABRT_7B_ADDR_NOACK 0 -#define ABRT_10ADDR1_NOACK 1 -#define ABRT_10ADDR2_NOACK 2 -#define ABRT_TXDATA_NOACK 3 -#define ABRT_GCALL_NOACK 4 -#define ABRT_GCALL_READ 5 -#define ABRT_SBYTE_ACKDET 7 -#define ABRT_SBYTE_NORSTRT 9 -#define ABRT_10B_RD_NORSTRT 10 -#define ABRT_MASTER_DIS 11 -#define ARB_LOST 12 - -#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) -#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) -#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) -#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) -#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) -#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) -#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) -#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) -#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) -#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) -#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) - -#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ - DW_IC_TX_ABRT_10ADDR1_NOACK | \ - DW_IC_TX_ABRT_10ADDR2_NOACK | \ - DW_IC_TX_ABRT_TXDATA_NOACK | \ - DW_IC_TX_ABRT_GCALL_NOACK) - -static char *abort_sources[] = { - [ABRT_7B_ADDR_NOACK] = - "slave address not acknowledged (7bit mode)", - [ABRT_10ADDR1_NOACK] = - "first address byte not acknowledged (10bit mode)", - [ABRT_10ADDR2_NOACK] = - "second address byte not acknowledged (10bit mode)", - [ABRT_TXDATA_NOACK] = - "data not acknowledged", - [ABRT_GCALL_NOACK] = - "no acknowledgement for a general call", - [ABRT_GCALL_READ] = - "read after general call", - [ABRT_SBYTE_ACKDET] = - "start byte acknowledged", - [ABRT_SBYTE_NORSTRT] = - "trying to send start byte when restart is disabled", - [ABRT_10B_RD_NORSTRT] = - "trying to read when restart is disabled (10bit mode)", - [ABRT_MASTER_DIS] = - "trying to use disabled adapter", - [ARB_LOST] = - "lost arbitration", -}; - -static u32 dw_readl(struct dw_i2c_dev *dev, int offset) -{ - u32 value; - - if (dev->flags & ACCESS_16BIT) - value = readw_relaxed(dev->base + offset) | - (readw_relaxed(dev->base + offset + 2) << 16); - else - value = readl_relaxed(dev->base + offset); - - if (dev->flags & ACCESS_SWAP) - return swab32(value); - else - return value; -} - -static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) -{ - if (dev->flags & ACCESS_SWAP) - b = swab32(b); - - if (dev->flags & ACCESS_16BIT) { - writew_relaxed((u16)b, dev->base + offset); - writew_relaxed((u16)(b >> 16), dev->base + offset + 2); - } else { - writel_relaxed(b, dev->base + offset); - } -} static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) { @@ -212,121 +43,6 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) dw_writel(dev, dev->master_cfg, DW_IC_CON); } -static u32 -i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) -{ - /* - * DesignWare I2C core doesn't seem to have solid strategy to meet - * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec - * will result in violation of the tHD;STA spec. - */ - if (cond) - /* - * Conditional expression: - * - * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH - * - * This is based on the DW manuals, and represents an ideal - * configuration. The resulting I2C bus speed will be - * faster than any of the others. - * - * If your hardware is free from tHD;STA issue, try this one. - */ - return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset; - else - /* - * Conditional expression: - * - * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf) - * - * This is just experimental rule; the tHD;STA period turned - * out to be proportinal to (_HCNT + 3). With this setting, - * we could meet both tHIGH and tHD;STA timing specs. - * - * If unsure, you'd better to take this alternative. - * - * The reason why we need to take into account "tf" here, - * is the same as described in i2c_dw_scl_lcnt(). - */ - return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000 - - 3 + offset; -} - -static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) -{ - /* - * Conditional expression: - * - * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf) - * - * DW I2C core starts counting the SCL CNTs for the LOW period - * of the SCL clock (tLOW) as soon as it pulls the SCL line. - * In order to meet the tLOW timing spec, we need to take into - * account the fall time of SCL signal (tf). Default tf value - * should be 0.3 us, for safety. - */ - return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset; -} - -static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) -{ - dw_writel(dev, enable, DW_IC_ENABLE); -} - -static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable) -{ - int timeout = 100; - - do { - __i2c_dw_enable(dev, enable); - if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable) - return; - - /* - * Wait 10 times the signaling period of the highest I2C - * transfer supported by the driver (for 400KHz this is - * 25us) as described in the DesignWare I2C databook. - */ - usleep_range(25, 250); - } while (timeout--); - - dev_warn(dev->dev, "timeout in %sabling adapter\n", - enable ? "en" : "dis"); -} - -static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev) -{ - /* - * Clock is not necessary if we got LCNT/HCNT values directly from - * the platform code. - */ - if (WARN_ON_ONCE(!dev->get_clk_rate_khz)) - return 0; - return dev->get_clk_rate_khz(dev); -} - -static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev) -{ - int ret; - - if (!dev->acquire_lock) - return 0; - - ret = dev->acquire_lock(dev); - if (!ret) - return 0; - - dev_err(dev->dev, "couldn't acquire bus ownership\n"); - - return ret; -} - -static void i2c_dw_release_lock(struct dw_i2c_dev *dev) -{ - if (dev->release_lock) - dev->release_lock(dev); -} - /** * i2c_dw_init() - Initialize the designware I2C master hardware * @dev: device private data @@ -457,25 +173,6 @@ int i2c_dw_init(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_init); -/* - * Waiting for bus not busy - */ -static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) -{ - int timeout = TIMEOUT; - - while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { - if (timeout <= 0) { - dev_warn(dev->dev, "timeout waiting for bus ready\n"); - return -ETIMEDOUT; - } - timeout--; - usleep_range(1000, 1100); - } - - return 0; -} - static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) { struct i2c_msg *msgs = dev->msgs; @@ -708,29 +405,6 @@ i2c_dw_read(struct dw_i2c_dev *dev) } } -static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) -{ - unsigned long abort_source = dev->abort_source; - int i; - - if (abort_source & DW_IC_TX_ABRT_NOACK) { - for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) - dev_dbg(dev->dev, - "%s: %s\n", __func__, abort_sources[i]); - return -EREMOTEIO; - } - - for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) - dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]); - - if (abort_source & DW_IC_TX_ARB_LOST) - return -EAGAIN; - else if (abort_source & DW_IC_TX_ABRT_GCALL_READ) - return -EINVAL; /* wrong msgs[] data */ - else - return -EIO; -} - /* * Prepare controller for a transaction and call i2c_dw_xfer_msg. */ @@ -818,12 +492,6 @@ done_nolock: return ret; } -static u32 i2c_dw_func(struct i2c_adapter *adap) -{ - struct dw_i2c_dev *dev = i2c_get_adapdata(adap); - return dev->functionality; -} - static const struct i2c_algorithm i2c_dw_algo = { .master_xfer = i2c_dw_xfer, .functionality = i2c_dw_func, @@ -946,29 +614,6 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) return IRQ_HANDLED; } -void i2c_dw_disable(struct dw_i2c_dev *dev) -{ - /* Disable controller */ - __i2c_dw_enable_and_wait(dev, false); - - /* Disable all interupts */ - dw_writel(dev, 0, DW_IC_INTR_MASK); - dw_readl(dev, DW_IC_CLR_INTR); -} -EXPORT_SYMBOL_GPL(i2c_dw_disable); - -void i2c_dw_disable_int(struct dw_i2c_dev *dev) -{ - dw_writel(dev, 0, DW_IC_INTR_MASK); -} -EXPORT_SYMBOL_GPL(i2c_dw_disable_int); - -u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) -{ - return dw_readl(dev, DW_IC_COMP_PARAM_1); -} -EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); - int i2c_dw_probe(struct dw_i2c_dev *dev) { struct i2c_adapter *adap = &dev->adapter; @@ -977,7 +622,11 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) init_completion(&dev->cmd_complete); - ret = i2c_dw_init(dev); + dev->init = i2c_dw_init; + dev->disable = i2c_dw_disable; + dev->disable_int = i2c_dw_disable_int; + + ret = dev->init(dev); if (ret) return ret; @@ -1020,5 +669,5 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_probe); -MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); +MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index ed485b69b449..86e1bd0b82e9 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -187,16 +187,19 @@ static struct dw_pci_controller dw_pci_controllers[] = { static int i2c_dw_pci_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + + i_dev->disable(i_dev); - i2c_dw_disable(pci_get_drvdata(pdev)); return 0; } static int i2c_dw_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); - return i2c_dw_init(pci_get_drvdata(pdev)); + return i_dev->init(i_dev); } #endif @@ -296,7 +299,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) { struct dw_i2c_dev *dev = pci_get_drvdata(pdev); - i2c_dw_disable(dev); + dev->disable(dev); pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index fd14b410369e..1f38c807be5f 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -356,7 +356,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); - i2c_dw_disable(dev); + dev->disable(dev); pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); @@ -400,7 +400,7 @@ static int dw_i2c_plat_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); - i2c_dw_disable(i_dev); + i_dev->disable(i_dev); i2c_dw_plat_prepare_clk(i_dev, false); return 0; @@ -412,7 +412,7 @@ static int dw_i2c_plat_resume(struct device *dev) struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); i2c_dw_plat_prepare_clk(i_dev, true); - i2c_dw_init(i_dev); + i_dev->init(i_dev); return 0; } |