summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/nct67754
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/nct6775.c47
3 files changed, 43 insertions, 12 deletions
diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775
index 345d11a2b526..f0dd3d2fec96 100644
--- a/Documentation/hwmon/nct6775
+++ b/Documentation/hwmon/nct6775
@@ -28,6 +28,10 @@ Supported chips:
Prefix: 'nct6791'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6792D
+ Prefix: 'nct6792'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Guenter Roeck <linux@roeck-us.net>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f893e0ff0081..fcca19b53bd2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1117,8 +1117,8 @@ config SENSORS_NCT6775
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
- NCT6791D and compatible Super-I/O chips. This driver replaces the
- w83627ehf driver for NCT6775F and NCT6776F.
+ NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
+ replaces the w83627ehf driver for NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 504cbddbdd90..c0dd307001c9 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -38,6 +38,7 @@
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
* nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3
+ * nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3
*
* #temp lists the number of monitored temperature sources (first value) plus
* the number of directly connectable temperature sensors (second value).
@@ -61,7 +62,7 @@
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
@@ -70,6 +71,7 @@ static const char * const nct6775_device_names[] = {
"nct6776",
"nct6779",
"nct6791",
+ "nct6792",
};
static unsigned short force_id;
@@ -100,6 +102,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
#define SIO_NCT6791_ID 0xc800
+#define SIO_NCT6792_ID 0xc910
#define SIO_ID_MASK 0xFFF0
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -529,6 +532,12 @@ static const s8 NCT6791_ALARM_BITS[] = {
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
+/* NCT6792 specific data */
+
+static const u16 NCT6792_REG_TEMP_MON[] = {
+ 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
+static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
+ 0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
/* NCT6102D/NCT6106D specific data */
@@ -1043,13 +1052,14 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
reg == 0x73 || reg == 0x75 || reg == 0x77;
case nct6779:
case nct6791:
+ case nct6792:
return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
reg == 0x402 ||
reg == 0x63a || reg == 0x63c || reg == 0x63e ||
reg == 0x640 || reg == 0x642 ||
reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 ||
- reg == 0x7b;
+ reg == 0x7b || reg == 0x7d;
}
return false;
}
@@ -1391,6 +1401,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
reg = nct6775_read_value(data,
data->REG_CRITICAL_PWM_ENABLE[i]);
if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -2790,6 +2801,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
val);
reg = nct6775_read_value(data,
@@ -3202,7 +3214,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
pwm4pin = false;
pwm5pin = false;
pwm6pin = false;
- } else { /* NCT6779D or NCT6791D */
+ } else { /* NCT6779D, NCT6791D, or NCT6792D */
regval = superio_inb(sioreg, 0x1c);
fan3pin = !(regval & (1 << 5));
@@ -3215,7 +3227,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
fan4min = fan4pin;
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
regval = superio_inb(sioreg, 0x2d);
fan6pin = (regval & (1 << 1));
pwm6pin = (regval & (1 << 0));
@@ -3588,6 +3600,7 @@ static int nct6775_probe(struct platform_device *pdev)
break;
case nct6791:
+ case nct6792:
data->in_num = 15;
data->pwm_num = 6;
data->auto_pwm_num = 4;
@@ -3650,12 +3663,20 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL;
data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE;
data->REG_ALARM = NCT6791_REG_ALARM;
- data->REG_BEEP = NCT6776_REG_BEEP;
+ if (data->kind == nct6791)
+ data->REG_BEEP = NCT6776_REG_BEEP;
+ else
+ data->REG_BEEP = NCT6792_REG_BEEP;
reg_temp = NCT6779_REG_TEMP;
- reg_temp_mon = NCT6779_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP);
- num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ if (data->kind == nct6791) {
+ reg_temp_mon = NCT6779_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ } else {
+ reg_temp_mon = NCT6792_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6792_REG_TEMP_MON);
+ }
reg_temp_over = NCT6779_REG_TEMP_OVER;
reg_temp_hyst = NCT6779_REG_TEMP_HYST;
reg_temp_config = NCT6779_REG_TEMP_CONFIG;
@@ -3854,6 +3875,7 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
break;
}
@@ -3885,6 +3907,7 @@ static int nct6775_probe(struct platform_device *pdev)
tmp |= 0x3e;
break;
case nct6791:
+ case nct6792:
tmp |= 0x7e;
break;
}
@@ -3972,7 +3995,7 @@ static int nct6775_resume(struct device *dev)
mutex_lock(&data->update_lock);
data->bank = 0xff; /* Force initial bank selection */
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
err = superio_enter(data->sioreg);
if (err)
goto abort;
@@ -4052,6 +4075,7 @@ static const char * const nct6775_sio_names[] __initconst = {
"NCT6776D/F",
"NCT6779D",
"NCT6791D",
+ "NCT6792D",
};
/* nct6775_find() looks for a '627 in the Super-I/O config space */
@@ -4086,6 +4110,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
case SIO_NCT6791_ID:
sio_data->kind = nct6791;
break;
+ case SIO_NCT6792_ID:
+ sio_data->kind = nct6792;
+ break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -4111,7 +4138,7 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
- if (sio_data->kind == nct6791)
+ if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
@@ -4221,7 +4248,7 @@ static void __exit sensors_nct6775_exit(void)
}
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D driver");
+MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
MODULE_LICENSE("GPL");
module_init(sensors_nct6775_init);