summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--block/bfq-iosched.c81
-rw-r--r--block/bfq-iosched.h5
-rw-r--r--block/bfq-wf2q.c3
3 files changed, 80 insertions, 9 deletions
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index a7ab0cb50733..47e6ec7427c4 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -209,15 +209,17 @@ static struct kmem_cache *bfq_pool;
* interactive applications automatically, using the following formula:
* duration = (R / r) * T, where r is the peak rate of the device, and
* R and T are two reference parameters.
- * In particular, R is the peak rate of the reference device (see below),
- * and T is a reference time: given the systems that are likely to be
- * installed on the reference device according to its speed class, T is
- * about the maximum time needed, under BFQ and while reading two files in
- * parallel, to load typical large applications on these systems.
- * In practice, the slower/faster the device at hand is, the more/less it
- * takes to load applications with respect to the reference device.
- * Accordingly, the longer/shorter BFQ grants weight raising to interactive
- * applications.
+ * In particular, R is the peak rate of the reference device (see
+ * below), and T is a reference time: given the systems that are
+ * likely to be installed on the reference device according to its
+ * speed class, T is about the maximum time needed, under BFQ and
+ * while reading two files in parallel, to load typical large
+ * applications on these systems (see the comments on
+ * max_service_from_wr below, for more details on how T is obtained).
+ * In practice, the slower/faster the device at hand is, the more/less
+ * it takes to load applications with respect to the reference device.
+ * Accordingly, the longer/shorter BFQ grants weight raising to
+ * interactive applications.
*
* BFQ uses four different reference pairs (R, T), depending on:
* . whether the device is rotational or non-rotational;
@@ -254,6 +256,60 @@ static int T_slow[2];
static int T_fast[2];
static int device_speed_thresh[2];
+/*
+ * BFQ uses the above-detailed, time-based weight-raising mechanism to
+ * privilege interactive tasks. This mechanism is vulnerable to the
+ * following false positives: I/O-bound applications that will go on
+ * doing I/O for much longer than the duration of weight
+ * raising. These applications have basically no benefit from being
+ * weight-raised at the beginning of their I/O. On the opposite end,
+ * while being weight-raised, these applications
+ * a) unjustly steal throughput to applications that may actually need
+ * low latency;
+ * b) make BFQ uselessly perform device idling; device idling results
+ * in loss of device throughput with most flash-based storage, and may
+ * increase latencies when used purposelessly.
+ *
+ * BFQ tries to reduce these problems, by adopting the following
+ * countermeasure. To introduce this countermeasure, we need first to
+ * finish explaining how the duration of weight-raising for
+ * interactive tasks is computed.
+ *
+ * For a bfq_queue deemed as interactive, the duration of weight
+ * raising is dynamically adjusted, as a function of the estimated
+ * peak rate of the device, so as to be equal to the time needed to
+ * execute the 'largest' interactive task we benchmarked so far. By
+ * largest task, we mean the task for which each involved process has
+ * to do more I/O than for any of the other tasks we benchmarked. This
+ * reference interactive task is the start-up of LibreOffice Writer,
+ * and in this task each process/bfq_queue needs to have at most ~110K
+ * sectors transferred.
+ *
+ * This last piece of information enables BFQ to reduce the actual
+ * duration of weight-raising for at least one class of I/O-bound
+ * applications: those doing sequential or quasi-sequential I/O. An
+ * example is file copy. In fact, once started, the main I/O-bound
+ * processes of these applications usually consume the above 110K
+ * sectors in much less time than the processes of an application that
+ * is starting, because these I/O-bound processes will greedily devote
+ * almost all their CPU cycles only to their target,
+ * throughput-friendly I/O operations. This is even more true if BFQ
+ * happens to be underestimating the device peak rate, and thus
+ * overestimating the duration of weight raising. But, according to
+ * our measurements, once transferred 110K sectors, these processes
+ * have no right to be weight-raised any longer.
+ *
+ * Basing on the last consideration, BFQ ends weight-raising for a
+ * bfq_queue if the latter happens to have received an amount of
+ * service at least equal to the following constant. The constant is
+ * set to slightly more than 110K, to have a minimum safety margin.
+ *
+ * This early ending of weight-raising reduces the amount of time
+ * during which interactive false positives cause the two problems
+ * described at the beginning of these comments.
+ */
+static const unsigned long max_service_from_wr = 120000;
+
#define RQ_BIC(rq) icq_to_bic((rq)->elv.priv[0])
#define RQ_BFQQ(rq) ((rq)->elv.priv[1])
@@ -1352,6 +1408,7 @@ static void bfq_update_bfqq_wr_on_rq_arrival(struct bfq_data *bfqd,
if (old_wr_coeff == 1 && wr_or_deserves_wr) {
/* start a weight-raising period */
if (interactive) {
+ bfqq->service_from_wr = 0;
bfqq->wr_coeff = bfqd->bfq_wr_coeff;
bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
} else {
@@ -3665,6 +3722,12 @@ static void bfq_update_wr_data(struct bfq_data *bfqd, struct bfq_queue *bfqq)
bfqq->entity.prio_changed = 1;
}
}
+ if (bfqq->wr_coeff > 1 &&
+ bfqq->wr_cur_max_time != bfqd->bfq_wr_rt_max_time &&
+ bfqq->service_from_wr > max_service_from_wr) {
+ /* see comments on max_service_from_wr */
+ bfq_bfqq_end_wr(bfqq);
+ }
}
/*
* To improve latency (for this or other queues), immediately
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index fcd941008127..350c39ae2896 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -337,6 +337,11 @@ struct bfq_queue {
* last transition from idle to backlogged.
*/
unsigned long service_from_backlogged;
+ /*
+ * Cumulative service received from the @bfq_queue since its
+ * last transition to weight-raised state.
+ */
+ unsigned long service_from_wr;
/*
* Value of wr start time when switching to soft rt
diff --git a/block/bfq-wf2q.c b/block/bfq-wf2q.c
index 4456eda34e48..4498c43245e2 100644
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@@ -838,6 +838,9 @@ void bfq_bfqq_served(struct bfq_queue *bfqq, int served)
if (!bfqq->service_from_backlogged)
bfqq->first_IO_time = jiffies;
+ if (bfqq->wr_coeff > 1)
+ bfqq->service_from_wr += served;
+
bfqq->service_from_backlogged += served;
for_each_entity(entity) {
st = bfq_entity_service_tree(entity);