summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/host/dw_mmc.c91
1 files changed, 81 insertions, 10 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 16516c528a88..50148991f30e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -403,6 +403,7 @@ static inline void dw_mci_set_cto(struct dw_mci *host)
unsigned int cto_clks;
unsigned int cto_div;
unsigned int cto_ms;
+ unsigned long irqflags;
cto_clks = mci_readl(host, TMOUT) & 0xff;
cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
@@ -413,8 +414,24 @@ static inline void dw_mci_set_cto(struct dw_mci *host)
/* add a bit spare time */
cto_ms += 10;
- mod_timer(&host->cto_timer,
- jiffies + msecs_to_jiffies(cto_ms) + 1);
+ /*
+ * The durations we're working with are fairly short so we have to be
+ * extra careful about synchronization here. Specifically in hardware a
+ * command timeout is _at most_ 5.1 ms, so that means we expect an
+ * interrupt (either command done or timeout) to come rather quickly
+ * after the mci_writel. ...but just in case we have a long interrupt
+ * latency let's add a bit of paranoia.
+ *
+ * In general we'll assume that at least an interrupt will be asserted
+ * in hardware by the time the cto_timer runs. ...and if it hasn't
+ * been asserted in hardware by that time then we'll assume it'll never
+ * come.
+ */
+ spin_lock_irqsave(&host->irq_lock, irqflags);
+ if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
+ mod_timer(&host->cto_timer,
+ jiffies + msecs_to_jiffies(cto_ms) + 1);
+ spin_unlock_irqrestore(&host->irq_lock, irqflags);
}
static void dw_mci_start_command(struct dw_mci *host,
@@ -429,11 +446,11 @@ static void dw_mci_start_command(struct dw_mci *host,
wmb(); /* drain writebuffer */
dw_mci_wait_while_busy(host, cmd_flags);
+ mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
+
/* response expected command only */
if (cmd_flags & SDMMC_CMD_RESP_EXP)
dw_mci_set_cto(host);
-
- mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
}
static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
@@ -1930,6 +1947,24 @@ static void dw_mci_set_drto(struct dw_mci *host)
mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms));
}
+static bool dw_mci_clear_pending_cmd_complete(struct dw_mci *host)
+{
+ if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
+ return false;
+
+ /*
+ * Really be certain that the timer has stopped. This is a bit of
+ * paranoia and could only really happen if we had really bad
+ * interrupt latency and the interrupt routine and timeout were
+ * running concurrently so that the del_timer() in the interrupt
+ * handler couldn't run.
+ */
+ WARN_ON(del_timer_sync(&host->cto_timer));
+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+
+ return true;
+}
+
static void dw_mci_tasklet_func(unsigned long priv)
{
struct dw_mci *host = (struct dw_mci *)priv;
@@ -1956,8 +1991,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
case STATE_SENDING_CMD11:
case STATE_SENDING_CMD:
- if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
- &host->pending_events))
+ if (!dw_mci_clear_pending_cmd_complete(host))
break;
cmd = host->cmd;
@@ -2126,8 +2160,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
/* fall through */
case STATE_SENDING_STOP:
- if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
- &host->pending_events))
+ if (!dw_mci_clear_pending_cmd_complete(host))
break;
/* CMD error in data command */
@@ -2600,6 +2633,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
struct dw_mci *host = dev_id;
u32 pending;
struct dw_mci_slot *slot = host->slot;
+ unsigned long irqflags;
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
@@ -2607,8 +2641,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
/* Check volt switch first, since it can look like an error */
if ((host->state == STATE_SENDING_CMD11) &&
(pending & SDMMC_INT_VOLT_SWITCH)) {
- unsigned long irqflags;
-
mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
pending &= ~SDMMC_INT_VOLT_SWITCH;
@@ -2624,11 +2656,15 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
}
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
+ spin_lock_irqsave(&host->irq_lock, irqflags);
+
del_timer(&host->cto_timer);
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
host->cmd_status = pending;
smp_wmb(); /* drain writebuffer */
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+
+ spin_unlock_irqrestore(&host->irq_lock, irqflags);
}
if (pending & DW_MCI_DATA_ERROR_FLAGS) {
@@ -2668,8 +2704,12 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
}
if (pending & SDMMC_INT_CMD_DONE) {
+ spin_lock_irqsave(&host->irq_lock, irqflags);
+
mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
dw_mci_cmd_interrupt(host, pending);
+
+ spin_unlock_irqrestore(&host->irq_lock, irqflags);
}
if (pending & SDMMC_INT_CD) {
@@ -2943,7 +2983,35 @@ static void dw_mci_cmd11_timer(unsigned long arg)
static void dw_mci_cto_timer(unsigned long arg)
{
struct dw_mci *host = (struct dw_mci *)arg;
+ unsigned long irqflags;
+ u32 pending;
+
+ spin_lock_irqsave(&host->irq_lock, irqflags);
+ /*
+ * If somehow we have very bad interrupt latency it's remotely possible
+ * that the timer could fire while the interrupt is still pending or
+ * while the interrupt is midway through running. Let's be paranoid
+ * and detect those two cases. Note that this is paranoia is somewhat
+ * justified because in this function we don't actually cancel the
+ * pending command in the controller--we just assume it will never come.
+ */
+ pending = mci_readl(host, MINTSTS); /* read-only mask reg */
+ if (pending & (DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_CMD_DONE)) {
+ /* The interrupt should fire; no need to act but we can warn */
+ dev_warn(host->dev, "Unexpected interrupt latency\n");
+ goto exit;
+ }
+ if (test_bit(EVENT_CMD_COMPLETE, &host->pending_events)) {
+ /* Presumably interrupt handler couldn't delete the timer */
+ dev_warn(host->dev, "CTO timeout when already completed\n");
+ goto exit;
+ }
+
+ /*
+ * Continued paranoia to make sure we're in the state we expect.
+ * This paranoia isn't really justified but it seems good to be safe.
+ */
switch (host->state) {
case STATE_SENDING_CMD11:
case STATE_SENDING_CMD:
@@ -2962,6 +3030,9 @@ static void dw_mci_cto_timer(unsigned long arg)
host->state);
break;
}
+
+exit:
+ spin_unlock_irqrestore(&host->irq_lock, irqflags);
}
static void dw_mci_dto_timer(unsigned long arg)