diff options
69 files changed, 494 insertions, 396 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 8219b2c6bb29..9c6bebe43449 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -80,6 +80,9 @@ SoCs: - OMAP5432 compatible = "ti,omap5432", "ti,omap5" +- DRA762 + compatible = "ti,dra762", "ti,dra7" + - DRA742 compatible = "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/MAINTAINERS b/MAINTAINERS index ea81de896d27..1c767c1e7962 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2101,17 +2101,38 @@ F: arch/arm/mach-pxa/include/mach/z2.h ARM/ZTE ARCHITECTURE M: Jun Nie <jun.nie@linaro.org> M: Baoyou Xie <baoyou.xie@linaro.org> +M: Shawn Guo <shawnguo@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +F: arch/arm/boot/dts/zx2967* F: arch/arm/mach-zx/ +F: arch/arm64/boot/dts/zte/ F: drivers/clk/zte/ +F: drivers/dma/zx_dma.c +F: drivers/gpio/gpio-zx.c +F: drivers/i2c/busses/i2c-zx2967.c +F: drivers/mmc/host/dw_mmc-zx.* +F: drivers/pinctrl/zte/ F: drivers/reset/reset-zx2967.c F: drivers/soc/zte/ +F: drivers/thermal/zx2967_thermal.c +F: drivers/watchdog/zx2967_wdt.c F: Documentation/devicetree/bindings/arm/zte.txt -F: Documentation/devicetree/bindings/clock/zx296702-clk.txt +F: Documentation/devicetree/bindings/clock/zx2967*.txt +F: Documentation/devicetree/bindings/dma/zxdma.txt +F: Documentation/devicetree/bindings/gpio/zx296702-gpio.txt +F: Documentation/devicetree/bindings/i2c/i2c-zx2967.txt +F: Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +F: Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt F: Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt F: Documentation/devicetree/bindings/soc/zte/ -F: include/dt-bindings/soc/zx*.h +F: Documentation/devicetree/bindings/sound/zte,*.txt +F: Documentation/devicetree/bindings/thermal/zx2967-thermal.txt +F: Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt +F: include/dt-bindings/clock/zx2967*.h +F: include/dt-bindings/soc/zte,*.h +F: sound/soc/codecs/zx_aud96p22.c +F: sound/soc/zte/ ARM/ZYNQ ARCHITECTURE M: Michal Simek <michal.simek@xilinx.com> @@ -3175,6 +3196,7 @@ S: Supported F: drivers/crypto/cavium/cpt/ CAVIUM THUNDERX2 ARM64 SOC +M: Robert Richter <rrichter@cavium.com> M: Jayachandran C <jnair@caviumnetworks.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 447629d89884..6dcea8e8e941 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -646,7 +646,7 @@ choice config DEBUG_OMAP2UART1 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 help This covers at least h4, 2430sdp, 3430sdp, 3630sdp, omap3 torpedo and 3530 lv som. @@ -654,17 +654,17 @@ choice config DEBUG_OMAP2UART2 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP2UART3 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP3UART3 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 help This covers at least cm_t3x, beagle, crane, devkit8000, igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, @@ -673,17 +673,17 @@ choice config DEBUG_OMAP4UART3 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP3UART4 bool "Kernel low-level debugging messages via OMAP36XX UART4" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP4UART4 bool "Kernel low-level debugging messages via OMAP4/5 UART4" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_OMAP7XXUART1 bool "Kernel low-level debugging via OMAP730 UART1" @@ -712,22 +712,22 @@ choice config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_TI81XXUART2 bool "Kernel low-level debugging messages via TI81XX UART2" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_TI81XXUART3 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_AM33XXUART1 bool "Kernel low-level debugging messages via AM33XX UART1" depends on ARCH_OMAP2PLUS - select DEBUG_OMAP2PLUS_UART + select DEBUG_UART_8250 config DEBUG_ZOOM_UART bool "Kernel low-level debugging messages via Zoom2/3 UART" @@ -896,12 +896,13 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793" - depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793 + bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1" + depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || \ + ARCH_R8A7792 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support - via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H - (R8A7792), or M2-N (R8A7793). + via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790), + M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793). config DEBUG_RCAR_GEN2_SCIF2 bool "Kernel low-level debugging messages via SCIF2 on R8A7794" @@ -1523,6 +1524,17 @@ config DEBUG_UART_PHYS default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if DEBUG_GEMINI + default 0x44e09000 if DEBUG_AM33XXUART1 + default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 + default 0x48022000 if DEBUG_TI81XXUART2 + default 0x48024000 if DEBUG_TI81XXUART3 + default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ + DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 + default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ + DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 + default 0x49020000 if DEBUG_OMAP3UART3 + default 0x49042000 if DEBUG_OMAP3UART4 default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ @@ -1641,10 +1653,21 @@ config DEBUG_UART_VIRT default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU + default 0xf9e09000 if DEBUG_AM33XXUART1 + default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 + default 0xfa022000 if DEBUG_TI81XXUART2 + default 0xfa024000 if DEBUG_TI81XXUART3 + default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ + DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 + default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ + DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 + default 0xfb020000 if DEBUG_OMAP3UART3 + default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index a6298eb56978..9897e8fa6845 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -191,6 +191,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; }; dp83867_1: ethernet-phy@3 { @@ -199,6 +200,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 3ecac56bf504..6f9b6f31437e 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -70,6 +70,7 @@ ti,min-output-impedance; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,dp83867-rxctrl-strap-quirk; }; dp83867_1: ethernet-phy@3 { @@ -80,5 +81,6 @@ ti,min-output-impedance; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index cfc2465e8b77..d23b9d56a88b 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -24,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y +CONFIG_VMSPLIT_2G=y CONFIG_AEABI=y # CONFIG_CPU_SW_DOMAIN_PAN is not set # CONFIG_COMPACTION is not set @@ -64,6 +65,7 @@ CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_RAM=y CONFIG_ASPEED_LPC_CTRL=y +CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y @@ -104,6 +106,7 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_ASPEED_BT_IPMI_BMC=y @@ -114,6 +117,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_ASPEED=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -166,7 +170,6 @@ CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y -CONFIG_LOCKUP_DETECTOR=y CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 3c20d93de389..c0ad7b82086b 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -67,6 +67,7 @@ CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_RAM=y CONFIG_ASPEED_LPC_CTRL=y +CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y @@ -107,6 +108,7 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_ASPEED_BT_IPMI_BMC=y @@ -117,6 +119,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_ASPEED=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -169,7 +172,6 @@ CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y -CONFIG_LOCKUP_DETECTOR=y CONFIG_WQ_WATCHDOG=y CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 3ee9d78c412a..43dab4890ad3 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -55,6 +55,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y @@ -62,9 +63,15 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_ZD1211RW=y CONFIG_INPUT_EVDEV=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 06e2e2a1a9be..27d9720f7207 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -143,6 +143,8 @@ CONFIG_VIDEO_ADV7343=m CONFIG_DRM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_DUMB_VGA_DAC=m +CONFIG_DRM_TINYDRM=m +CONFIG_TINYDRM_ST7586=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DA8XX=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 25325ed9319e..8c2a2619971b 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -3,7 +3,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y @@ -48,7 +47,43 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_LEDS=y +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_INTEL=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIUART_AG6XX=y +CONFIG_BT_HCIUART_MRVL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y +CONFIG_NFC=y +CONFIG_NFC_DIGITAL=m +CONFIG_NFC_NCI=y +CONFIG_NFC_NCI_SPI=m +CONFIG_NFC_NCI_UART=m +CONFIG_NFC_HCI=m +CONFIG_NFC_SHDLC=y +CONFIG_NFC_S3FWRN5_I2C=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -65,7 +100,9 @@ CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y +CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=y +CONFIG_USB_LAN78XX=m CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y @@ -189,7 +226,25 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m CONFIG_USB_DWC3=y CONFIG_USB_DWC2=y CONFIG_USB_HSIC_USB3503=y @@ -209,7 +264,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_MAX77693=y CONFIG_LEDS_MAX8997=y -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8997=y @@ -253,18 +307,30 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +CONFIG_PROVE_LOCKING=y +CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_RSA=m +CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m @@ -276,6 +342,7 @@ CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA256_ARM=m CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 23660f3d0f7f..484e51fbd4a6 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -27,7 +27,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 1736813bdea7..32acac9ab81a 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_CMA=y +CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y @@ -186,6 +187,7 @@ CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y CONFIG_I2C_MUX_GPIO=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_ALGOPCF=m @@ -193,12 +195,14 @@ CONFIG_I2C_ALGOPCA=m CONFIG_I2C_GPIO=y CONFIG_I2C_IMX=y CONFIG_SPI=y +CONFIG_SPI_GPIO=y CONFIG_SPI_IMX=y CONFIG_SPI_FSL_DSPI=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_STMPE=y +CONFIG_GPIO_74X164=y CONFIG_POWER_RESET=y |