summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/cris/Kconfig15
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig1
-rw-r--r--arch/cris/arch-v10/kernel/entry.S41
-rw-r--r--arch/cris/arch-v10/kernel/irq.c59
-rw-r--r--arch/cris/kernel/process.c5
-rw-r--r--arch/cris/kernel/ptrace.c6
-rw-r--r--include/asm-cris/thread_info.h9
7 files changed, 107 insertions, 29 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index f653772a87a8..222da1501f47 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -13,6 +13,10 @@ config ZONE_DMA
bool
default y
+config NO_DMA
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
@@ -153,7 +157,8 @@ source "net/Kconfig"
# bring in ETRAX built-in drivers
menu "Drivers for built-in interfaces"
-source arch/cris/arch-v10/drivers/Kconfig
+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
+source arch/cris/arch/drivers/Kconfig
endmenu
@@ -184,6 +189,10 @@ source "drivers/isdn/Kconfig"
source "drivers/telephony/Kconfig"
+source "drivers/i2c/Kconfig"
+
+source "drivers/rtc/Kconfig"
+
#
# input before char - char/joystick depends on it. As does USB.
#
@@ -198,6 +207,10 @@ source "fs/Kconfig"
source "sound/Kconfig"
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/Kconfig"
+
source "drivers/usb/Kconfig"
source "kernel/Kconfig.instrumentation"
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 03e2e68f947d..e6fc8455a372 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -2,6 +2,7 @@ config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
select NET_ETHERNET
+ select MII
help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
controller.
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index bc9bed97f225..ec62c951fa3c 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -500,9 +500,8 @@ _work_notifysig:
;; deal with pending signals and notify-resume requests
move.d $r9, $r10 ; do_notify_resume syscall/irq param
- moveq 0, $r11 ; oldset param - 0 in this case
- move.d $sp, $r12 ; the regs param
- move.d $r1, $r13 ; the thread_info_flags parameter
+ move.d $sp, $r11 ; the regs param
+ move.d $r1, $r12 ; the thread_info_flags parameter
jsr do_notify_resume
ba _Rexit
@@ -678,13 +677,19 @@ IRQ1_interrupt:
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
+ ;; If there is a glitch on the NMI pin shorter than ~100ns
+ ;; (i.e. non-active by the time we get here) then the nmi_pin bit
+ ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit
+ ;; is cleared by us however (when feeding the watchdog), which is why
+ ;; we use that bit to determine what brought us here.
+
move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
- and.d 0x80000000, $r1
- beq wdog
+ and.d (1<<30), $r1
+ bne wdog
move.d $sp, $r10
jsr handle_nmi
setf m ; Enable NMI again
- retb ; Return from NMI
+ ba _Rexit ; Return the standard way
nop
wdog:
#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
@@ -775,22 +780,9 @@ multiple_interrupt:
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
- moveq 2, $r2 ; first bit we care about is the timer0 irq
- move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq
- move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs
-1:
- btst $r2, $r0 ; check for the irq given by bit r2
- bpl 2f
- move.d $r2, $r10 ; First argument to do_IRQ
- move.d $sp, $r11 ; second argument to do_IRQ
- jsr do_IRQ
-2:
- addq 1, $r2 ; next vector bit
- cmp.b 32, $r2
- bne 1b ; process all irq's up to and including number 31
- moveq 0, $r9 ; make ret_from_intr realise we came from an ir
+ move.d $sp, $r10
+ jsr do_multiple_IRQ
- move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs
jump ret_from_intr
do_sigtrap:
@@ -837,6 +829,13 @@ _ugdb_handle_breakpoint:
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
+ .global kernel_execve
+kernel_execve:
+ move.d __NR_execve, $r9
+ break 13
+ ret
+ nop
+
.data
hw_bp_trigs:
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 845c95f6e871..e06ab0050d37 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -12,10 +12,16 @@
*/
#include <asm/irq.h>
+#include <asm/current.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/init.h>
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
@@ -75,8 +81,8 @@ BUILD_IRQ(12, 0x1000)
BUILD_IRQ(13, 0x2000)
void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */
void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
-BUILD_IRQ(16, 0x10000)
-BUILD_IRQ(17, 0x20000)
+BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */
+BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */
BUILD_IRQ(18, 0x40000)
BUILD_IRQ(19, 0x80000)
BUILD_IRQ(20, 0x100000)
@@ -147,6 +153,55 @@ void system_call(void); /* from entry.S */
void do_sigtrap(void); /* from entry.S */
void gdb_handle_breakpoint(void); /* from entry.S */
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+/* Handle multiple IRQs */
+void do_multiple_IRQ(struct pt_regs* regs)
+{
+ int bit;
+ unsigned masked;
+ unsigned mask;
+ unsigned ethmask = 0;
+
+ /* Get interrupts to mask and handle */
+ mask = masked = *R_VECT_MASK_RD;
+
+ /* Never mask timer IRQ */
+ mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
+
+ /*
+ * If either ethernet interrupt (rx or tx) is active then block
+ * the other one too. Unblock afterwards also.
+ */
+ if (mask &
+ (IO_STATE(R_VECT_MASK_RD, dma0, active) |
+ IO_STATE(R_VECT_MASK_RD, dma1, active))) {
+ ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
+ IO_MASK(R_VECT_MASK_RD, dma1));
+ }
+
+ /* Block them */
+ *R_VECT_MASK_CLR = (mask | ethmask);
+
+ /* An extra irq_enter here to prevent softIRQs to run after
+ * each do_IRQ. This will decrease the interrupt latency.
+ */
+ irq_enter();
+
+ /* Handle all IRQs */
+ for (bit = 2; bit < 32; bit++) {
+ if (masked & (1 << bit)) {
+ do_IRQ(bit, regs);
+ }
+ }
+
+ /* This irq_exit() will trigger the soft IRQs. */
+ irq_exit();
+
+ /* Unblock the IRQs again */
+ *R_VECT_MASK_SET = (masked | ethmask);
+}
+
/* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
setting the irq vector table.
*/
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 123451c44154..9ca558fc5bc8 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -195,6 +195,11 @@ EXPORT_SYMBOL(enable_hlt);
*/
void (*pm_idle)(void);
+extern void default_idle(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 1085d037027b..3ccd20e85dce 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -81,13 +81,13 @@
/* notification of userspace execution resumption
* - triggered by current->work.notify_resume
*/
-extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal(int canrestart, struct pt_regs *regs);
-void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs,
+void do_notify_resume(int canrestart, struct pt_regs *regs,
__u32 thread_info_flags )
{
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(canrestart,oldset,regs);
+ do_signal(canrestart,regs);
}
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index fde39f6c49c7..784668ab0fa2 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -32,6 +32,7 @@ struct thread_info {
unsigned long flags; /* low level flags */
__u32 cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
+ __u32 tls; /* TLS for this thread */
mm_segment_t addr_limit; /* thread address space:
0-0xBFFFFFFF for user-thead
@@ -79,14 +80,18 @@ struct thread_info {
* - other flags in MSW
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */