diff options
66 files changed, 864 insertions, 507 deletions
diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst index 21537766be4d..4b9ed5874d5a 100644 --- a/Documentation/networking/netdev-FAQ.rst +++ b/Documentation/networking/netdev-FAQ.rst @@ -254,6 +254,32 @@ you will have done run-time testing specific to your change, but at a minimum, your changes should survive an ``allyesconfig`` and an ``allmodconfig`` build without new warnings or failures. +Q: How do I post corresponding changes to user space components? +---------------------------------------------------------------- +A: User space code exercising kernel features should be posted +alongside kernel patches. This gives reviewers a chance to see +how any new interface is used and how well it works. + +When user space tools reside in the kernel repo itself all changes +should generally come as one series. If series becomes too large +or the user space project is not reviewed on netdev include a link +to a public repo where user space patches can be seen. + +In case user space tooling lives in a separate repository but is +reviewed on netdev (e.g. patches to `iproute2` tools) kernel and +user space patches should form separate series (threads) when posted +to the mailing list, e.g.:: + + [PATCH net-next 0/3] net: some feature cover letter + └─ [PATCH net-next 1/3] net: some feature prep + └─ [PATCH net-next 2/3] net: some feature do it + └─ [PATCH net-next 3/3] selftest: net: some feature + + [PATCH iproute2-next] ip: add support for some feature + +Posting as one thread is discouraged because it confuses patchwork +(as of patchwork 2.2.2). + Q: Any other tips to help ensure my net/net-next patch gets OK'd? ----------------------------------------------------------------- A: Attention to detail. Re-read your own work as if you were the diff --git a/MAINTAINERS b/MAINTAINERS index 0d80c24c114e..a7e3bb9da445 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3528,11 +3528,12 @@ BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER M: Arend van Spriel <arend.vanspriel@broadcom.com> M: Franky Lin <franky.lin@broadcom.com> M: Hante Meuleman <hante.meuleman@broadcom.com> -M: Chi-Hsien Lin <chi-hsien.lin@cypress.com> -M: Wright Feng <wright.feng@cypress.com> +M: Chi-hsien Lin <chi-hsien.lin@infineon.com> +M: Wright Feng <wright.feng@infineon.com> +M: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> L: linux-wireless@vger.kernel.org L: brcm80211-dev-list.pdl@broadcom.com -L: brcm80211-dev-list@cypress.com +L: SHA-cyfmac-dev-list@infineon.com S: Supported F: drivers/net/wireless/broadcom/brcm80211/ @@ -13162,7 +13163,9 @@ M: Jesper Dangaard Brouer <hawk@kernel.org> M: Ilias Apalodimas <ilias.apalodimas@linaro.org> L: netdev@vger.kernel.org S: Supported +F: Documentation/networking/page_pool.rst F: include/net/page_pool.h +F: include/trace/events/page_pool.h F: net/core/page_pool.c PANASONIC LAPTOP ACPI EXTRAS DRIVER @@ -14804,7 +14807,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.g F: drivers/net/wireless/realtek/rtlwifi/ REALTEK WIRELESS DRIVER (rtw88) -M: Yan-Hsuan Chuang <yhchuang@realtek.com> +M: Yan-Hsuan Chuang <tony0620emma@gmail.com> L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/realtek/rtw88/ @@ -15777,9 +15780,8 @@ F: drivers/slimbus/ F: include/linux/slimbus.h SFC NETWORK DRIVER -M: Solarflare linux maintainers <linux-net-drivers@solarflare.com> -M: Edward Cree <ecree@solarflare.com> -M: Martin Habets <mhabets@solarflare.com> +M: Edward Cree <ecree.xilinx@gmail.com> +M: Martin Habets <habetsm.xilinx@gmail.com> L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/sfc/ diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 84ecbc6fa0ff..47afc5938c26 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1460,7 +1460,39 @@ static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave) slave->dev->flags &= ~IFF_SLAVE; } -static struct slave *bond_alloc_slave(struct bonding *bond) +static void slave_kobj_release(struct kobject *kobj) +{ + struct slave *slave = to_slave(kobj); + struct bonding *bond = bond_get_bond_by_slave(slave); + + cancel_delayed_work_sync(&slave->notify_work); + if (BOND_MODE(bond) == BOND_MODE_8023AD) + kfree(SLAVE_AD_INFO(slave)); + + kfree(slave); +} + +static struct kobj_type slave_ktype = { + .release = slave_kobj_release, +#ifdef CONFIG_SYSFS + .sysfs_ops = &slave_sysfs_ops, +#endif +}; + +static int bond_kobj_init(struct slave *slave) +{ + int err; + + err = kobject_init_and_add(&slave->kobj, &slave_ktype, + &(slave->dev->dev.kobj), "bonding_slave"); + if (err) + kobject_put(&slave->kobj); + + return err; +} + +static struct slave *bond_alloc_slave(struct bonding *bond, + struct net_device *slave_dev) { struct slave *slave = NULL; @@ -1468,11 +1500,17 @@ static struct slave *bond_alloc_slave(struct bonding *bond) if (!slave) return NULL; + slave->bond = bond; + slave->dev = slave_dev; + + if (bond_kobj_init(slave)) + return NULL; + if (BOND_MODE(bond) == BOND_MODE_8023AD) { SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info), GFP_KERNEL); if (!SLAVE_AD_INFO(slave)) { - kfree(slave); + kobject_put(&slave->kobj); return NULL; } } @@ -1481,17 +1519,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond) return slave; } -static void bond_free_slave(struct slave *slave) -{ - struct bonding *bond = bond_get_bond_by_slave(slave); - - cancel_delayed_work_sync(&slave->notify_work); - if (BOND_MODE(bond) == BOND_MODE_8023AD) - kfree(SLAVE_AD_INFO(slave)); - - kfree(slave); -} - static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info) { info->bond_mode = BOND_MODE(bond); @@ -1678,14 +1705,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_undo_flags; } - new_slave = bond_alloc_slave(bond); + new_slave = bond_alloc_slave(bond, slave_dev); if (!new_slave) { res = -ENOMEM; goto err_undo_flags; } - new_slave->bond = bond; - new_slave->dev = slave_dev; /* Set the new_slave's queue_id to be zero. Queue ID mapping * is set via sysfs or module option if desired. */ @@ -2007,7 +2032,7 @@ err_restore_mtu: dev_set_mtu(slave_dev, new_slave->original_mtu); err_free: - bond_free_slave(new_slave); + kobject_put(&new_slave->kobj); err_undo_flags: /* Enslave of first slave has failed and we need to fix master's mac */ @@ -2187,7 +2212,7 @@ static int __bond_release_one(struct net_device *bond_dev, if (!netif_is_bond_master(slave_dev)) slave_dev->priv_flags &= ~IFF_BONDING; - bond_free_slave(slave); + kobject_put(&slave->kobj); return 0; } diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c index 9b8346638f69..fd07561da034 100644 --- a/drivers/net/bonding/bond_sysfs_slave.c +++ b/drivers/net/bonding/bond_sysfs_slave.c @@ -121,7 +121,6 @@ static const struct slave_attribute *slave_attrs[] = { }; #define to_slave_attr(_at) container_of(_at, struct slave_attribute, attr) -#define to_slave(obj) container_of(obj, struct slave, kobj) static ssize_t slave_show(struct kobject *kobj, struct attribute *attr, char *buf) @@ -132,28 +131,15 @@ static ssize_t slave_show(struct kobject *kobj, return slave_attr->show(slave, buf); } -static const struct sysfs_ops slave_sysfs_ops = { +const struct sysfs_ops slave_sysfs_ops = { .show = slave_show, }; -static struct kobj_type slave_ktype = { -#ifdef CONFIG_SYSFS - .sysfs_ops = &slave_sysfs_ops, -#endif -}; - int bond_sysfs_slave_add(struct slave *slave) { const struct slave_attribute **a; int err; - err = kobject_init_and_add(&slave->kobj, &slave_ktype, - &(slave->dev->dev.kobj), "bonding_slave"); - if (err) { - kobject_put(&slave->kobj); - return err; - } - for (a = slave_attrs; *a; ++a) { err = sysfs_create_file(&slave->kobj, &((*a)->attr)); if (err) { @@ -171,6 +157,4 @@ void bond_sysfs_slave_del(struct slave *slave) for (a = slave_attrs; *a; ++a) sysfs_remove_file(&slave->kobj, &((*a)->attr)); - - kobject_put(&slave->kobj); } diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index f3fc37e96b08..61a93b192037 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1033,7 +1033,7 @@ static const struct can_bittiming_const m_can_bittiming_const_31X = { .name = KBUILD_MODNAME, .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */ .tseg1_max = 256, - .tseg2_min = 1, /* Time segment 2 = phase_seg2 */ + .tseg2_min = 2, /* Time segment 2 = phase_seg2 */ .tseg2_max = 128, .sjw_max = 128, .brp_min = 1, @@ -1385,6 +1385,8 @@ static int m_can_dev_setup(struct m_can_classdev *m_can_dev) &m_can_data_bittiming_const_31X; break; case 32: + case 33: + /* Support both MCAN version v3.2.x and v3.3.0 */ m_can_dev->can.bittiming_const = m_can_dev->bit_timing ? m_can_dev->bit_timing : &m_can_bittiming_const_31X; @@ -1653,7 +1655,7 @@ static int m_can_open(struct net_device *dev) INIT_WORK(&cdev->tx_work, m_can_tx_work_queue); err = request_threaded_irq(dev->irq, NULL, m_can_isr, - IRQF_ONESHOT | IRQF_TRIGGER_FALLING, + IRQF_ONESHOT, dev->name, dev); } else { err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name, diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 9c215f7c5f81..8a39be076e14 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -2738,6 +2738,10 @@ static int mcp251xfd_probe(struct spi_device *spi) u32 freq; int err; + if (!spi->irq) + return dev_err_probe(&spi->dev, -ENXIO, + "No IRQ specified (maybe node \"interrupts-extended\" in DT missing)!\n"); + rx_int = devm_gpiod_get_optional(&spi->dev, "microchip,rx-int", GPIOD_IN); if (PTR_ERR(rx_int) == -EPROBE_DEFER) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 3005157059ca..018ca3b057a3 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -63,21 +63,27 @@ enum gs_can_identify_mode { }; /* data types passed between host and device */ + +/* The firmware on the original USB2CAN by Geschwister Schneider + * Technologie Entwicklungs- und Vertriebs UG exchanges all data + * between the host and the device in host byte order. This is done + * with the struct gs_host_config::byte_order member, which is sent + * first to indicate the desired byte order. + * + * The widely used open source firmware candleLight doesn't support + * this feature and exchanges the data in little endian byte order. + */ struct gs_host_config { - u32 byte_order; + __le32 byte_order; } __packed; -/* All data exchanged between host and device is exchanged in host byte order, - * thanks to the struct gs_host_config byte_order member, which is sent first - * to indicate the desired byte order. - */ struct gs_device_config { u8 reserved1; u8 reserved2; u8 reserved3; u8 icount; - u32 sw_version; - u32 hw_version; + __le32 sw_version; + __le32 hw_version; } __packed; #define GS_CAN_MODE_NORMAL 0 @@ -87,26 +93,26 @@ struct gs_device_config { #define GS_CAN_MODE_ONE_SHOT BIT(3) struct gs_device_mode { - u32 mode; - u32 flags; + __le32 mode; + __le32 flags; } __packed; struct gs_device_state { - u32 state; - u32 rxerr; - u32 txerr; + __le32 state; + __le32 rxerr; + __le32 txerr; } __packed; struct gs_device_bittiming { - u32 prop_seg; - u32 phase_seg1; - u32 phase_seg2; - u32 sjw; - u32 brp; + __le32 prop_seg; + __le32 phase_seg1; + __le32 phase_seg2; + __le32 sjw; + __le32 brp; } __packed; struct gs_identify_mode { - u32 mode; + __le32 mode; } __packed; #define GS_CAN_FEATURE_LISTEN_ONLY BIT(0) @@ -117,23 +123,23 @@ struct gs_identify_mode { #define GS_CAN_FEATURE_IDENTIFY BIT(5) struct gs_device_bt_const { - u32 feature; - u32 fclk_can; - u32 tseg1_min; - u32 tseg1_max; - u32 tseg2_min; - u32 tseg2_max; - u32 sjw_max; - u32 brp_min; - u32 brp_max; - u32 brp_inc; + __le32 feature; + __le32 fclk_can; + __le32 tseg1_min; + __le32 tseg1_max; + __le32 tseg2_min; + __le32 tseg2_max; + __le32 sjw_max; + __le32 brp_min; + __le32 brp_max; + __le32 brp_inc; } __packed; #define GS_CAN_FLAG_OVERFLOW 1 struct gs_host_frame { u32 echo_id; - u32 can_id; + __le32 can_id; u8 can_dlc; u8 channel; @@ -329,13 +335,13 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) if (!skb) return; - cf->can_id = hf->can_id; + cf->can_id = le32_to_cpu(hf->can_id); cf->can_dlc = get_can_dlc(hf->can_dlc); memcpy(cf->data, hf->data, 8); /* ERROR frames tell us information about the controller */ - if (hf->can_id & CAN_ERR_FLAG) + if (le32_to_cpu(hf->can_id) & CAN_ERR_FLAG) gs_update_state(dev, cf); netdev->stats.rx_packets++; @@ -418,11 +424,11 @@ static int gs_usb_set_bittiming(struct net_device *netdev) if (!dbt) return -ENOMEM; - dbt->prop_seg = bt->prop_seg; - dbt->phase_seg1 = bt->phase_seg1; - dbt->phase_seg2 = bt->phase_seg2; - dbt->sjw = bt->sjw; - dbt->brp = bt->brp; + dbt->prop_seg = cpu_to_le32(bt->prop_seg); + dbt->phase_seg1 = cpu_to_le32(bt->phase_seg1); + dbt->phase_seg2 = cpu_to_le32(bt->phase_seg2); + dbt->sjw = cpu_to_le32(bt->sjw); + dbt->brp = cpu_to_le32(bt->brp); /* request bit timings */ rc = usb_control_msg(interface_to_usbdev(intf), @@ -503,7 +509,7 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb, cf = (struct can_frame *)skb->data; - hf->can_id = cf->can_id; + hf->can_id = cpu_to_le32(cf->can_id); hf->can_dlc = cf->can_dlc; memcpy(hf->data, cf->data, cf->can_dlc); @@ -573,6 +579,7 @@ static int gs_can_open(struct net_device *netdev) int rc, i; struct gs_device_mode *dm; u32 ctrlmode; + u32 flags = 0; rc = open_candev(netdev); if (rc) @@ -640,24 +647,24 @@ static int gs_can_open(struct net_device *netdev) /* flags */ ctrlmode = dev->can.ctrlmode; - dm->flags = 0; if (ctrlmode & CAN_CTRLMODE_LOOPBACK) - dm->flags |= GS_CAN_MODE_LOOP_BACK; + flags |= GS_CAN_MODE_LOOP_BACK; else if (ctrlmode & CAN_CTRLMODE_LISTENONLY) - dm->flags |= GS_CAN_MODE_LISTEN_ONLY; + flags |= GS_CAN_MODE_LISTEN_ONLY; /* Controller is not allowed to retry TX * this mode is unavailable on atmels uc3c hardware */ if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) - dm->flags |= GS_CAN_MODE_ONE_SHOT; + flags |= GS_CAN_MODE_ONE_SHOT; if (ctrlmode & CAN_CTRLMODE_3_SAMPLES) - dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE; + flags |= GS_CAN_MODE_TRIPLE_SAMPLE; /* finally start device */ - dm->mode = GS_CAN_MODE_START; + dm->mode = cpu_to_le32(GS_CAN_MODE_START); + dm->flags = cpu_to_le32(flags); rc = usb_control_msg(interface_to_usbdev(dev->iface), usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0), GS_USB_BREQ_MODE, @@ -737,9 +744,9 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify) return -ENOMEM; if (do_identify) - imode->mode = GS_CAN_IDENTIFY_ON; + imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_ON); else - imode->mode = GS_CAN_IDENTIFY_OFF; + imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_OFF); rc = usb_control_msg(interface_to_usbdev(dev->iface), usb_sndctrlpipe(interface_to_usbdev(dev->iface), @@ -790,6 +797,7 @@ static struct gs_can *gs_make_candev(unsigned int channel, struct net_device *netdev; int rc; struct gs_device_bt_const *bt_const; + u32 feature; bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL); if (!bt_const) @@ -830,14 +838,14 @@ static struct gs_can *gs_make_candev(unsigned int channel, /* dev setup */ strcpy(dev->bt_const.name, "gs_usb"); - dev->bt_const.tseg1_min = bt_const->tseg1_min; - dev->bt_const.tseg1_max = bt_const->tseg1_max; - dev->bt_const.tseg2_min = bt_const->tseg2_min; - dev->bt_const.tseg2_max = bt_const->tseg2_max; - dev->bt_const.sjw_max = bt_const->sjw_max; - dev->bt_const.brp_min = bt_const->brp_min; - dev->bt_const.brp_max = bt_const->brp_max; - dev->bt_const.brp_inc = bt_const->brp_inc; + dev->bt_const.tseg1_min = le32_to_cpu(bt_const->tseg1_min); + dev->bt_const.tseg1_max = le32_to_cpu(bt_const->tseg1_max); + dev->bt_const.tseg2_min = le32_to_cpu(bt_const->tseg2_min); + de |