Merge tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
  and CAN subtrees.

  Current release - regressions:

   - gro_cells: reduce number of synchronize_net() calls

   - ch_ktls: release a lock before jumping to an error path

  Current release - always broken:

   - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header

  Previous release - regressions:

   - net/tls: fix missing received data after fast remote close

   - vsock/virtio: discard packets only when socket is really closed

   - sock: set sk_err to ee_errno on dequeue from errq

   - cxgb4: fix the panic caused by non smac rewrite

  Previous release - always broken:

   - tcp: fix corner cases around setting ECN with BPF selection of
     congestion control

   - tcp: fix race condition when creating child sockets from syncookies
     on loopback interface

   - usbnet: ipheth: fix connectivity with iOS 14

   - tun: honor IOCB_NOWAIT flag

   - net/packet: fix packet receive on L3 devices without visible hard
     header

   - devlink: Make sure devlink instance and port are in same net
     namespace

   - net: openvswitch: fix TTL decrement action netlink message format

   - bonding: wait for sysfs kobject destruction before freeing struct
     slave

   - net: stmmac: fix upstream patch applied to the wrong context

   - bnxt_en: fix return value and unwind in probe error paths

  Misc:

   - devlink: add extra layer of categorization to the reload stats uAPI
     before it's released"

* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
  ch_ktls: lock is not freed
  net/tls: Protect from calling tls_dev_del for TLS RX twice
  devlink: Make sure devlink instance and port are in same net namespace
  devlink: Hold rtnl lock while reading netdev attributes
  ptp: clockmatrix: bug fix for idtcm_strverscmp
  enetc: Let the hardware auto-advance the taprio base-time of 0
  gro_cells: reduce number of synchronize_net() calls
  net: stmmac: fix incorrect merge of patch upstream
  ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
  Documentation: netdev-FAQ: suggest how to post co-dependent series
  ibmvnic: enhance resetting status check during module exit
  ...

66 files changed, 864 insertions, 507 deletions

diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst
index 21537766be4d..4b9ed5874d5a 100644
--- a/Documentation/networking/netdev-FAQ.rst
+++ b/Documentation/networking/netdev-FAQ.rst
@@ -254,6 +254,32 @@ you will have done run-time testing specific to your change, but at a
 minimum, your changes should survive an ``allyesconfig`` and an
 ``allmodconfig`` build without new warnings or failures.
 
+Q: How do I post corresponding changes to user space components?
+----------------------------------------------------------------
+A: User space code exercising kernel features should be posted
+alongside kernel patches. This gives reviewers a chance to see
+how any new interface is used and how well it works.
+
+When user space tools reside in the kernel repo itself all changes
+should generally come as one series. If series becomes too large
+or the user space project is not reviewed on netdev include a link
+to a public repo where user space patches can be seen.
+
+In case user space tooling lives in a separate repository but is
+reviewed on netdev  (e.g. patches to `iproute2` tools) kernel and
+user space patches should form separate series (threads) when posted
+to the mailing list, e.g.::
+
+  [PATCH net-next 0/3] net: some feature cover letter
+   └─ [PATCH net-next 1/3] net: some feature prep
+   └─ [PATCH net-next 2/3] net: some feature do it
+   └─ [PATCH net-next 3/3] selftest: net: some feature
+
+  [PATCH iproute2-next] ip: add support for some feature
+
+Posting as one thread is discouraged because it confuses patchwork
+(as of patchwork 2.2.2).
+
 Q: Any other tips to help ensure my net/net-next patch gets OK'd?
 -----------------------------------------------------------------
 A: Attention to detail.  Re-read your own work as if you were the
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d80c24c114e..a7e3bb9da445 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3528,11 +3528,12 @@ BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
 M:	Arend van Spriel <arend.vanspriel@broadcom.com>
 M:	Franky Lin <franky.lin@broadcom.com>
 M:	Hante Meuleman <hante.meuleman@broadcom.com>
-M:	Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-M:	Wright Feng <wright.feng@cypress.com>
+M:	Chi-hsien Lin <chi-hsien.lin@infineon.com>
+M:	Wright Feng <wright.feng@infineon.com>
+M:	Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
 L:	linux-wireless@vger.kernel.org
 L:	brcm80211-dev-list.pdl@broadcom.com
-L:	brcm80211-dev-list@cypress.com
+L:	SHA-cyfmac-dev-list@infineon.com
 S:	Supported
 F:	drivers/net/wireless/broadcom/brcm80211/
 
@@ -13162,7 +13163,9 @@ M:	Jesper Dangaard Brouer <hawk@kernel.org>
 M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	Documentation/networking/page_pool.rst
 F:	include/net/page_pool.h
+F:	include/trace/events/page_pool.h
 F:	net/core/page_pool.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
@@ -14804,7 +14807,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.g
 F:	drivers/net/wireless/realtek/rtlwifi/
 
 REALTEK WIRELESS DRIVER (rtw88)
-M:	Yan-Hsuan Chuang <yhchuang@realtek.com>
+M:	Yan-Hsuan Chuang <tony0620emma@gmail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/realtek/rtw88/
@@ -15777,9 +15780,8 @@ F:	drivers/slimbus/
 F:	include/linux/slimbus.h
 
 SFC NETWORK DRIVER
-M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-M:	Edward Cree <ecree@solarflare.com>
-M:	Martin Habets <mhabets@solarflare.com>
+M:	Edward Cree <ecree.xilinx@gmail.com>
+M:	Martin Habets <habetsm.xilinx@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/sfc/
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 84ecbc6fa0ff..47afc5938c26 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1460,7 +1460,39 @@ static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave)
 	slave->dev->flags &= ~IFF_SLAVE;
 }
 
-static struct slave *bond_alloc_slave(struct bonding *bond)
+static void slave_kobj_release(struct kobject *kobj)
+{
+	struct slave *slave = to_slave(kobj);
+	struct bonding *bond = bond_get_bond_by_slave(slave);
+
+	cancel_delayed_work_sync(&slave->notify_work);
+	if (BOND_MODE(bond) == BOND_MODE_8023AD)
+		kfree(SLAVE_AD_INFO(slave));
+
+	kfree(slave);
+}
+
+static struct kobj_type slave_ktype = {
+	.release = slave_kobj_release,
+#ifdef CONFIG_SYSFS
+	.sysfs_ops = &slave_sysfs_ops,
+#endif
+};
+
+static int bond_kobj_init(struct slave *slave)
+{
+	int err;
+
+	err = kobject_init_and_add(&slave->kobj, &slave_ktype,
+				   &(slave->dev->dev.kobj), "bonding_slave");
+	if (err)
+		kobject_put(&slave->kobj);
+
+	return err;
+}
+
+static struct slave *bond_alloc_slave(struct bonding *bond,
+				      struct net_device *slave_dev)
 {
 	struct slave *slave = NULL;
 
@@ -1468,11 +1500,17 @@ static struct slave *bond_alloc_slave(struct bonding *bond)
 	if (!slave)
 		return NULL;
 
+	slave->bond = bond;
+	slave->dev = slave_dev;
+
+	if (bond_kobj_init(slave))
+		return NULL;
+
 	if (BOND_MODE(bond) == BOND_MODE_8023AD) {
 		SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info),
 					       GFP_KERNEL);
 		if (!SLAVE_AD_INFO(slave)) {
-			kfree(slave);
+			kobject_put(&slave->kobj);
 			return NULL;
 		}
 	}
@@ -1481,17 +1519,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond)
 	return slave;
 }
 
-static void bond_free_slave(struct slave *slave)
-{
-	struct bonding *bond = bond_get_bond_by_slave(slave);
-
-	cancel_delayed_work_sync(&slave->notify_work);
-	if (BOND_MODE(bond) == BOND_MODE_8023AD)
-		kfree(SLAVE_AD_INFO(slave));
-
-	kfree(slave);
-}
-
 static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info)
 {
 	info->bond_mode = BOND_MODE(bond);
@@ -1678,14 +1705,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 			goto err_undo_flags;
 	}
 
-	new_slave = bond_alloc_slave(bond);
+	new_slave = bond_alloc_slave(bond, slave_dev);
 	if (!new_slave) {
 		res = -ENOMEM;
 		goto err_undo_flags;
 	}
 
-	new_slave->bond = bond;
-	new_slave->dev = slave_dev;
 	/* Set the new_slave's queue_id to be zero.  Queue ID mapping
 	 * is set via sysfs or module option if desired.
 	 */
@@ -2007,7 +2032,7 @@ err_restore_mtu:
 	dev_set_mtu(slave_dev, new_slave->original_mtu);
 
 err_free:
-	bond_free_slave(new_slave);
+	kobject_put(&new_slave->kobj);
 
 err_undo_flags:
 	/* Enslave of first slave has failed and we need to fix master's mac */
@@ -2187,7 +2212,7 @@ static int __bond_release_one(struct net_device *bond_dev,
 	if (!netif_is_bond_master(slave_dev))
 		slave_dev->priv_flags &= ~IFF_BONDING;
 
-	bond_free_slave(slave);
+	kobject_put(&slave->kobj);
 
 	return 0;
 }
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 9b8346638f69..fd07561da034 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -121,7 +121,6 @@ static const struct slave_attribute *slave_attrs[] = {
 };
 
 #define to_slave_attr(_at) container_of(_at, struct slave_attribute, attr)
-#define to_slave(obj)	container_of(obj, struct slave, kobj)
 
 static ssize_t slave_show(struct kobject *kobj,
 			  struct attribute *attr, char *buf)
@@ -132,28 +131,15 @@ static ssize_t slave_show(struct kobject *kobj,
 	return slave_attr->show(slave, buf);
 }
 
-static const struct sysfs_ops slave_sysfs_ops = {
+const struct sysfs_ops slave_sysfs_ops = {
 	.show = slave_show,
 };
 
-static struct kobj_type slave_ktype = {
-#ifdef CONFIG_SYSFS
-	.sysfs_ops = &slave_sysfs_ops,
-#endif
-};
-
 int bond_sysfs_slave_add(struct slave *slave)
 {
 	const struct slave_attribute **a;
 	int err;
 
-	err = kobject_init_and_add(&slave->kobj, &slave_ktype,
-				   &(slave->dev->dev.kobj), "bonding_slave");
-	if (err) {
-		kobject_put(&slave->kobj);
-		return err;
-	}
-
 	for (a = slave_attrs; *a; ++a) {
 		err = sysfs_create_file(&slave->kobj, &((*a)->attr));
 		if (err) {
@@ -171,6 +157,4 @@ void bond_sysfs_slave_del(struct slave *slave)
 
 	for (a = slave_attrs; *a; ++a)
 		sysfs_remove_file(&slave->kobj, &((*a)->attr));
-
-	kobject_put(&slave->kobj);
 }
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index f3fc37e96b08..61a93b192037 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1033,7 +1033,7 @@ static const struct can_bittiming_const m_can_bittiming_const_31X = {
 	.name = KBUILD_MODNAME,
 	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
 	.tseg1_max = 256,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
+	.tseg2_min = 2,		/* Time segment 2 = phase_seg2 */
 	.tseg2_max = 128,
 	.sjw_max = 128,
 	.brp_min = 1,
@@ -1385,6 +1385,8 @@ static int m_can_dev_setup(struct m_can_classdev *m_can_dev)
 						&m_can_data_bittiming_const_31X;
 		break;
 	case 32:
+	case 33:
+		/* Support both MCAN version v3.2.x and v3.3.0 */
 		m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
 			m_can_dev->bit_timing : &m_can_bittiming_const_31X;
 
@@ -1653,7 +1655,7 @@ static int m_can_open(struct net_device *dev)
 		INIT_WORK(&cdev->tx_work, m_can_tx_work_queue);
 
 		err = request_threaded_irq(dev->irq, NULL, m_can_isr,
-					   IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+					   IRQF_ONESHOT,
 					   dev->name, dev);
 	} else {
 		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 9c215f7c5f81..8a39be076e14 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2738,6 +2738,10 @@ static int mcp251xfd_probe(struct spi_device *spi)
 	u32 freq;
 	int err;
 
+	if (!spi->irq)
+		return dev_err_probe(&spi->dev, -ENXIO,
+				     "No IRQ specified (maybe node \"interrupts-extended\" in DT missing)!\n");
+
 	rx_int = devm_gpiod_get_optional(&spi->dev, "microchip,rx-int",
 					 GPIOD_IN);
 	if (PTR_ERR(rx_int) == -EPROBE_DEFER)
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index 3005157059ca..018ca3b057a3 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -63,21 +63,27 @@ enum gs_can_identify_mode {
 };
 
 /* data types passed between host and device */
+
+/* The firmware on the original USB2CAN by Geschwister Schneider
+ * Technologie Entwicklungs- und Vertriebs UG exchanges all data
+ * between the host and the device in host byte order. This is done
+ * with the struct gs_host_config::byte_order member, which is sent
+ * first to indicate the desired byte order.
+ *
+ * The widely used open source firmware candleLight doesn't support
+ * this feature and exchanges the data in little endian byte order.
+ */
 struct gs_host_config {
-	u32 byte_order;
+	__le32 byte_order;
 } __packed;
-/* All data exchanged between host and device is exchanged in host byte order,
- * thanks to the struct gs_host_config byte_order member, which is sent first
- * to indicate the desired byte order.
- */
 
 struct gs_device_config {
 	u8 reserved1;
 	u8 reserved2;
 	u8 reserved3;
 	u8 icount;
-	u32 sw_version;
-	u32 hw_version;
+	__le32 sw_version;
+	__le32 hw_version;
 } __packed;
 
 #define GS_CAN_MODE_NORMAL               0
@@ -87,26 +93,26 @@ struct gs_device_config {
 #define GS_CAN_MODE_ONE_SHOT             BIT(3)
 
 struct gs_device_mode {
-	u32 mode;
-	u32 flags;
+	__le32 mode;
+	__le32 flags;
 } __packed;
 
 struct gs_device_state {
-	u32 state;
-	u32 rxerr;
-	u32 txerr;
+	__le32 state;
+	__le32 rxerr;
+	__le32 txerr;
 } __packed;
 
 struct gs_device_bittiming {
-	u32 prop_seg;
-	u32 phase_seg1;
-	u32 phase_seg2;
-	u32 sjw;
-	u32 brp;
+	__le32 prop_seg;
+	__le32 phase_seg1;
+	__le32 phase_seg2;
+	__le32 sjw;
+	__le32 brp;
 } __packed;
 
 struct gs_identify_mode {
-	u32 mode;
+	__le32 mode;
 } __packed;
 
 #define GS_CAN_FEATURE_LISTEN_ONLY      BIT(0)
@@ -117,23 +123,23 @@ struct gs_identify_mode {
 #define GS_CAN_FEATURE_IDENTIFY         BIT(5)
 
 struct gs_device_bt_const {
-	u32 feature;
-	u32 fclk_can;
-	u32 tseg1_min;
-	u32 tseg1_max;
-	u32 tseg2_min;
-	u32 tseg2_max;
-	u32 sjw_max;
-	u32 brp_min;
-	u32 brp_max;
-	u32 brp_inc;
+	__le32 feature;
+	__le32 fclk_can;
+	__le32 tseg1_min;
+	__le32 tseg1_max;
+	__le32 tseg2_min;
+	__le32 tseg2_max;
+	__le32 sjw_max;
+	__le32 brp_min;
+	__le32 brp_max;
+	__le32 brp_inc;
 } __packed;
 
 #define GS_CAN_FLAG_OVERFLOW 1
 
 struct gs_host_frame {
 	u32 echo_id;
-	u32 can_id;
+	__le32 can_id;
 
 	u8 can_dlc;
 	u8 channel;
@@ -329,13 +335,13 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
 		if (!skb)
 			return;
 
-		cf->can_id = hf->can_id;
+		cf->can_id = le32_to_cpu(hf->can_id);
 
 		cf->can_dlc = get_can_dlc(hf->can_dlc);
 		memcpy(cf->data, hf->data, 8);
 
 		/* ERROR frames tell us information about the controller */
-		if (hf->can_id & CAN_ERR_FLAG)
+		if (le32_to_cpu(hf->can_id) & CAN_ERR_FLAG)
 			gs_update_state(dev, cf);
 
 		netdev->stats.rx_packets++;
@@ -418,11 +424,11 @@ static int gs_usb_set_bittiming(struct net_device *netdev)
 	if (!dbt)
 		return -ENOMEM;
 
-	dbt->prop_seg = bt->prop_seg;
-	dbt->phase_seg1 = bt->phase_seg1;
-	dbt->phase_seg2 = bt->phase_seg2;
-	dbt->sjw = bt->sjw;
-	dbt->brp = bt->brp;
+	dbt->prop_seg = cpu_to_le32(bt->prop_seg);
+	dbt->phase_seg1 = cpu_to_le32(bt->phase_seg1);
+	dbt->phase_seg2 = cpu_to_le32(bt->phase_seg2);
+	dbt->sjw = cpu_to_le32(bt->sjw);
+	dbt->brp = cpu_to_le32(bt->brp);
 
 	/* request bit timings */
 	rc = usb_control_msg(interface_to_usbdev(intf),
@@ -503,7 +509,7 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
 
 	cf = (struct can_frame *)skb->data;
 
-	hf->can_id = cf->can_id;
+	hf->can_id = cpu_to_le32(cf->can_id);
 	hf->can_dlc = cf->can_dlc;
 	memcpy(hf->data, cf->data, cf->can_dlc);
 
@@ -573,6 +579,7 @@ static int gs_can_open(struct net_device *netdev)
 	int rc, i;
 	struct gs_device_mode *dm;
 	u32 ctrlmode;
+	u32 flags = 0;
 
 	rc = open_candev(netdev);
 	if (rc)
@@ -640,24 +647,24 @@ static int gs_can_open(struct net_device *netdev)
 
 	/* flags */
 	ctrlmode = dev->can.ctrlmode;
-	dm->flags = 0;
 
 	if (ctrlmode & CAN_CTRLMODE_LOOPBACK)
-		dm->flags |= GS_CAN_MODE_LOOP_BACK;
+		flags |= GS_CAN_MODE_LOOP_BACK;
 	else if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
-		dm->flags |= GS_CAN_MODE_LISTEN_ONLY;
+		flags |= GS_CAN_MODE_LISTEN_ONLY;
 
 	/* Controller is not allowed to retry TX
 	 * this mode is unavailable on atmels uc3c hardware
 	 */
 	if (ctrlmode & CAN_CTRLMODE_ONE_SHOT)
-		dm->flags |= GS_CAN_MODE_ONE_SHOT;
+		flags |= GS_CAN_MODE_ONE_SHOT;
 
 	if (ctrlmode & CAN_CTRLMODE_3_SAMPLES)
-		dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
+		flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
 
 	/* finally start device */
-	dm->mode = GS_CAN_MODE_START;
+	dm->mode = cpu_to_le32(GS_CAN_MODE_START);
+	dm->flags = cpu_to_le32(flags);
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
 			     usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0),
 			     GS_USB_BREQ_MODE,
@@ -737,9 +744,9 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
 		return -ENOMEM;
 
 	if (do_identify)
-		imode->mode = GS_CAN_IDENTIFY_ON;
+		imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_ON);
 	else
-		imode->mode = GS_CAN_IDENTIFY_OFF;
+		imode->mode = cpu_to_le32(GS_CAN_IDENTIFY_OFF);
 
 	rc = usb_control_msg(interface_to_usbdev(dev->iface),
 			     usb_sndctrlpipe(interface_to_usbdev(dev->iface),
@@ -790,6 +797,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 	struct net_device *netdev;
 	int rc;
 	struct gs_device_bt_const *bt_const;
+	u32 feature;
 
 	bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL);
 	if (!bt_const)
@@ -830,14 +838,14 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 
 	/* dev setup */
 	strcpy(dev->bt_const.name, "gs_usb");
-	dev->bt_const.tseg1_min = bt_const->tseg1_min;
-	dev->b