diff options
-rw-r--r-- | Documentation/x86/entry_64.txt | 18 | ||||
-rw-r--r-- | Documentation/x86/x86_64/kernel-stacks | 8 | ||||
-rw-r--r-- | arch/x86/ia32/ia32entry.S | 4 | ||||
-rw-r--r-- | arch/x86/include/asm/calling.h | 1 | ||||
-rw-r--r-- | arch/x86/include/asm/mce.h | 1 | ||||
-rw-r--r-- | arch/x86/include/asm/thread_info.h | 15 | ||||
-rw-r--r-- | arch/x86/include/asm/traps.h | 6 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/mcheck/mce.c | 114 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/mcheck/p5.c | 6 | ||||
-rw-r--r-- | arch/x86/kernel/cpu/mcheck/winchip.c | 5 | ||||
-rw-r--r-- | arch/x86/kernel/entry_64.S | 317 | ||||
-rw-r--r-- | arch/x86/kernel/irq_32.c | 13 | ||||
-rw-r--r-- | arch/x86/kernel/signal.c | 6 | ||||
-rw-r--r-- | arch/x86/kernel/traps.c | 119 | ||||
-rw-r--r-- | arch/x86/vdso/Makefile | 2 |
15 files changed, 325 insertions, 310 deletions
diff --git a/Documentation/x86/entry_64.txt b/Documentation/x86/entry_64.txt index 4a1c5c2dc5a9..9132b86176a3 100644 --- a/Documentation/x86/entry_64.txt +++ b/Documentation/x86/entry_64.txt @@ -78,9 +78,6 @@ The expensive (paranoid) way is to read back the MSR_GS_BASE value xorl %ebx,%ebx 1: ret -and the whole paranoid non-paranoid macro complexity is about whether -to suffer that RDMSR cost. - If we are at an interrupt or user-trap/gate-alike boundary then we can use the faster check: the stack will be a reliable indicator of whether SWAPGS was already done: if we see that we are a secondary @@ -93,6 +90,15 @@ which might have triggered right after a normal entry wrote CS to the stack but before we executed SWAPGS, then the only safe way to check for GS is the slower method: the RDMSR. -So we try only to mark those entry methods 'paranoid' that absolutely -need the more expensive check for the GS base - and we generate all -'normal' entry points with the regular (faster) entry macros. +Therefore, super-atomic entries (except NMI, which is handled separately) +must use idtentry with paranoid=1 to handle gsbase correctly. This +triggers three main behavior changes: + + - Interrupt entry will use the slower gsbase check. + - Interrupt entry from user mode will switch off the IST stack. + - Interrupt exit to kernel mode will not attempt to reschedule. + +We try to only use IST entries and the paranoid entry code for vectors +that absolutely need the more expensive check for the GS base - and we +generate all 'normal' entry points with the regular (faster) paranoid=0 +variant. diff --git a/Documentation/x86/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks index a01eec5d1d0b..e3c8a49d1a2f 100644 --- a/Documentation/x86/x86_64/kernel-stacks +++ b/Documentation/x86/x86_64/kernel-stacks @@ -40,9 +40,11 @@ An IST is selected by a non-zero value in the IST field of an interrupt-gate descriptor. When an interrupt occurs and the hardware loads such a descriptor, the hardware automatically sets the new stack pointer based on the IST value, then invokes the interrupt handler. If -software wants to allow nested IST interrupts then the handler must -adjust the IST values on entry to and exit from the interrupt handler. -(This is occasionally done, e.g. for debug exceptions.) +the interrupt came from user mode, then the interrupt handler prologue +will switch back to the per-thread stack. If software wants to allow +nested IST interrupts then the handler must adjust the IST values on +entry to and exit from the interrupt handler. (This is occasionally +done, e.g. for debug exceptions.) Events with different IST codes (i.e. with different stacks) can be nested. For example, a debug interrupt can safely be interrupted by an diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 82e8a1d44658..156ebcab4ada 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -179,8 +179,8 @@ sysenter_dispatch: sysexit_from_sys_call: andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) /* clear IF, that popfq doesn't enable interrupts early */ - andl $~0x200,EFLAGS-R11(%rsp) - movl RIP-R11(%rsp),%edx /* User %eip */ + andl $~0x200,EFLAGS-ARGOFFSET(%rsp) + movl RIP-ARGOFFSET(%rsp),%edx /* User %eip */ CFI_REGISTER rip,rdx RESTORE_ARGS 0,24,0,0,0,0 xorq %r8,%r8 diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h index 76659b67fd11..1f1297b46f83 100644 --- a/arch/x86/include/asm/calling.h +++ b/arch/x86/include/asm/calling.h @@ -83,7 +83,6 @@ For 32-bit we have the following conventions - kernel is built with #define SS 160 #define ARGOFFSET R11 -#define SWFRAME ORIG_RAX .macro SAVE_ARGS addskip=0, save_rcx=1, save_r891011=1, rax_enosys=0 subq $9*8+\addskip, %rsp diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 51b26e895933..9b3de99dc004 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -190,7 +190,6 @@ enum mcp_flags { void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); int mce_notify_irq(void); -void mce_notify_process(void); DECLARE_PER_CPU(struct mce, injectm); diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 547e344a6dc6..e82e95abc92b 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -75,7 +75,6 @@ struct thread_info { #define TIF_SYSCALL_EMU 6 /* syscall emulation active */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_USER_RETURN_NOTIFY 11 /* notify kernel of userspace return */ #define TIF_UPROBE 12 /* breakpointed or singlestepping */ #define TIF_NOTSC 16 /* TSC is not accessible in userland */ @@ -100,7 +99,6 @@ struct thread_info { #define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY) #define _TIF_UPROBE (1 << TIF_UPROBE) #define _TIF_NOTSC (1 << TIF_NOTSC) @@ -140,7 +138,7 @@ struct thread_info { /* Only used for 64 bit */ #define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME | \ + (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \ _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE) /* flags to check in __switch_to() */ @@ -170,6 +168,17 @@ static inline struct thread_info *current_thread_info(void) return ti; } +static inline unsigned long current_stack_pointer(void) +{ + unsigned long sp; +#ifdef CONFIG_X86_64 + asm("mov %%rsp,%0" : "=g" (sp)); +#else + asm("mov %%esp,%0" : "=g" (sp)); +#endif + return sp; +} + #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h index 707adc6549d8..4e49d7dff78e 100644 --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -1,6 +1,7 @@ #ifndef _ASM_X86_TRAPS_H #define _ASM_X86_TRAPS_H +#include <linux/context_tracking_state.h> #include <linux/kprobes.h> #include <asm/debugreg.h> @@ -110,6 +111,11 @@ asmlinkage void smp_thermal_interrupt(void); asmlinkage void mce_threshold_interrupt(void); #endif +extern enum ctx_state ist_enter(struct pt_regs *regs); +extern void ist_exit(struct pt_regs *regs, enum ctx_state prev_state); +extern void ist_begin_non_atomic(struct pt_regs *regs); +extern void ist_end_non_atomic(void); + /* Interrupts/Exceptions */ enum { X86_TRAP_DE = 0, /* 0, Divide-by-zero */ diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index d2c611699cd9..d23179900755 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -43,6 +43,7 @@ #include <linux/export.h> #include <asm/processor.h> +#include <asm/traps.h> #include <asm/mce.h> #include <asm/msr.h> @@ -1003,51 +1004,6 @@ static void mce_clear_state(unsigned long *toclear) } /* - * Need to save faulting physical address associated with a process - * in the machine check handler some place where we can grab it back - * later in mce_notify_process() - */ -#define MCE_INFO_MAX 16 - -struct mce_info { - atomic_t inuse; - struct task_struct *t; - __u64 paddr; - int restartable; -} mce_info[MCE_INFO_MAX]; - -static void mce_save_info(__u64 addr, int c) -{ - struct mce_info *mi; - - for (mi = mce_info; mi < &mce_info[MCE_INFO_MAX]; mi++) { - if (atomic_cmpxchg(&mi->inuse, 0, 1) == 0) { - mi->t = current; - mi->paddr = addr; - mi->restartable = c; - return; - } - } - - mce_panic("Too many concurrent recoverable errors", NULL, NULL); -} - -static struct mce_info *mce_find_info(void) -{ - struct mce_info *mi; - - for (mi = mce_info; mi < &mce_info[MCE_INFO_MAX]; mi++) - if (atomic_read(&mi->inuse) && mi->t == current) - return mi; - return NULL; -} - -static void mce_clear_info(struct mce_info *mi) -{ - atomic_set(&mi->inuse, 0); -} - -/* * The actual machine check handler. This only handles real * exceptions when something got corrupted coming in through int 18. * @@ -1063,6 +1019,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) { struct mca_config *cfg = &mca_cfg; struct mce m, *final; + enum ctx_state prev_state; int i; int worst = 0; int severity; @@ -1084,6 +1041,10 @@ void do_machine_check(struct pt_regs *regs, long error_code) DECLARE_BITMAP(toclear, MAX_NR_BANKS); DECLARE_BITMAP(valid_banks, MAX_NR_BANKS); char *msg = "Unknown"; + u64 recover_paddr = ~0ull; + int flags = MF_ACTION_REQUIRED; + + prev_state = ist_enter(regs); this_cpu_inc(mce_exception_count); @@ -1203,9 +1164,9 @@ void do_machine_check(struct pt_regs *regs, long error_code) if (no_way_out) mce_panic("Fatal machine check on current CPU", &m, msg); if (worst == MCE_AR_SEVERITY) { - /* schedule action before return to userland */ - mce_save_info(m.addr, m.mcgstatus & MCG_STATUS_RIPV); - set_thread_flag(TIF_MCE_NOTIFY); + recover_paddr = m.addr; + if (!(m.mcgstatus & MCG_STATUS_RIPV)) + flags |= MF_MUST_KILL; } else if (kill_it) { force_sig(SIGBUS, current); } @@ -1216,6 +1177,27 @@ void do_machine_check(struct pt_regs *regs, long error_code) mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); out: sync_core(); + + if (recover_paddr == ~0ull) + goto done; + + pr_err("Uncorrected hardware memory error in user-access at %llx", + recover_paddr); + /* + * We must call memory_failure() here even if the current process is + * doomed. We still need to mark the page as poisoned and alert any + * other users of the page. + */ + ist_begin_non_atomic(regs); + local_irq_enable(); + if (memory_failure(recover_paddr >> PAGE_SHIFT, MCE_VECTOR, flags) < 0) { + pr_err("Memory error not recovered"); + force_sig(SIGBUS, current); + } + local_irq_disable(); + ist_end_non_atomic(); +done: + ist_exit(regs, prev_state); } EXPORT_SYMBOL_GPL(do_machine_check); @@ -1233,42 +1215,6 @@ int memory_failure(unsigned long pfn, int vector, int flags) #endif /* - * Called in process context that interrupted by MCE and marked with - * TIF_MCE_NOTIFY, just before returning to erroneous userland. - * This code is allowed to sleep. - * Attempt possible recovery such as calling the high level VM handler to - * process any corrupted pages, and kill/signal current process if required. - * Action required errors are handled here. - */ -void mce_notify_process(void) -{ - unsigned long pfn; - struct mce_info *mi = mce_find_info(); - int flags = MF_ACTION_REQUIRED; - - if (!mi) - mce_panic("Lost physical address for unconsumed uncorrectable error", NULL, NULL); - pfn = mi->paddr >> PAGE_SHIFT; - - clear_thread_flag(TIF_MCE_NOTIFY); - - pr_err("Uncorrected hardware memory error in user-access at %llx", - mi->paddr); - /* - * We must call memory_failure() here even if the current process is - * doomed. We still need to mark the page as poisoned and alert any - * other users of the page. - */ - if (!mi->restartable) - flags |= MF_MUST_KILL; - if (memory_failure(pfn, MCE_VECTOR, flags) < 0) { - pr_err("Memory error not recovered"); - force_sig(SIGBUS, current); - } - mce_clear_info(mi); -} - -/* * Action optional processing happens here (picking up * from the list of faulting pages that do_machine_check() * placed into the "ring"). diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c index a3042989398c..ec2663a708e4 100644 --- a/arch/x86/kernel/cpu/mcheck/p5.c +++ b/arch/x86/kernel/cpu/mcheck/p5.c @@ -8,6 +8,7 @@ #include <linux/smp.h> #include <asm/processor.h> +#include <asm/traps.h> #include <asm/mce.h> #include <asm/msr.h> @@ -17,8 +18,11 @@ int mce_p5_enabled __read_mostly; /* Machine check handler for Pentium class Intel CPUs: */ static void pentium_machine_check(struct pt_regs *regs, long error_code) { + enum ctx_state prev_state; u32 loaddr, hi, lotype; + prev_state = ist_enter(regs); + rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi); rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi); @@ -33,6 +37,8 @@ static void pentium_machine_check(struct pt_regs *regs, long error_code) } add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE); + + ist_exit(regs, prev_state); } /* Set up machine check reporting for processors with Intel style MCE: */ diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c index 7dc5564d0cdf..bd5d46a32210 100644 --- a/arch/x86/kernel/cpu/mcheck/winchip.c +++ b/arch/x86/kernel/cpu/mcheck/winchip.c @@ -7,14 +7,19 @@ #include <linux/types.h> #include <asm/processor.h> +#include <asm/traps.h> #include <asm/mce.h> #include <asm/msr.h> /* Machine check handler for WinChip C6: */ static void winchip_machine_check(struct pt_regs *regs, long error_code) { + enum ctx_state prev_state = ist_enter(regs); + printk(KERN_EMERG "CPU0: Machine Check Exception.\n"); add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE); + + ist_exit(regs, prev_state); } /* Set up machine check reporting on the Winchip C6 series */ diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 9ebaf63ba182..db13655c3a2a 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -143,7 +143,8 @@ ENDPROC(native_usergs_sysret64) movq \tmp,RSP+\offset(%rsp) movq $__USER_DS,SS+\offset(%rsp) movq $__USER_CS,CS+\offset(%rsp) - movq $-1,RCX+\offset(%rsp) + movq RIP+\offset(%rsp),\tmp /* get rip */ + movq \tmp,RCX+\offset(%rsp) /* copy it to rcx as sysret would do */ movq R11+\offset(%rsp),\tmp /* get eflags */ movq \tmp,EFLAGS+\offset(%rsp) .endm @@ -155,27 +156,6 @@ ENDPROC(native_usergs_sysret64) movq \tmp,R11+\offset(%rsp) .endm - .macro FAKE_STACK_FRAME child_rip - /* push in order ss, rsp, eflags, cs, rip */ - xorl %eax, %eax - pushq_cfi $__KERNEL_DS /* ss */ - /*CFI_REL_OFFSET ss,0*/ - pushq_cfi %rax /* rsp */ - CFI_REL_OFFSET rsp,0 - pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) /* eflags - interrupts on */ - /*CFI_REL_OFFSET rflags,0*/ - pushq_cfi $__KERNEL_CS /* cs */ - /*CFI_REL_OFFSET cs,0*/ - pushq_cfi \child_rip /* rip */ - CFI_REL_OFFSET rip,0 - pushq_cfi %rax /* orig rax */ - .endm - - .macro UNFAKE_STACK_FRAME - addq $8*6, %rsp - CFI_ADJUST_CFA_OFFSET -(6*8) - .endm - /* * initial frame state for interrupts (and exceptions without error code) */ @@ -238,51 +218,6 @@ ENDPROC(native_usergs_sysret64) CFI_REL_OFFSET r15, R15+\offset .endm -/* save partial stack frame */ - .macro SAVE_ARGS_IRQ - cld - /* start from rbp in pt_regs and jump over */ - movq_cfi rdi, (RDI-RBP) - movq_cfi rsi, (RSI-RBP) - movq_cfi rdx, (RDX-RBP) - movq_cfi rcx, (RCX-RBP) - movq_cfi rax, (RAX-RBP) - movq_cfi r8, (R8-RBP) - movq_cfi r9, (R9-RBP) - movq_cfi r10, (R10-RBP) - movq_cfi r11, (R11-RBP) - - /* Save rbp so that we can unwind from get_irq_regs() */ - movq_cfi rbp, 0 - - /* Save previous stack value */ - movq %rsp, %rsi - - leaq -RBP(%rsp),%rdi /* arg1 for handler */ - testl $3, CS-RBP(%rsi) - je 1f - SWAPGS - /* - * irq_count is used to check if a CPU is already on an interrupt stack - * or not. While this is essentially redundant with preempt_count it is - * a little cheaper to use a separate counter in the PDA (short of - * moving irq_enter into assembly, which would be too much work) - */ -1: incl PER_CPU_VAR(irq_count) - cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp - CFI_DEF_CFA_REGISTER rsi - - /* Store previous stack value */ - pushq %rsi - CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ - 0x77 /* DW_OP_breg7 */, 0, \ - 0x06 /* DW_OP_deref */, \ - 0x08 /* DW_OP_const1u */, SS+8-RBP, \ - 0x22 /* DW_OP_plus */ - /* We entered an interrupt context - irqs are off: */ - TRACE_IRQS_OFF - .endm - ENTRY(save_paranoid) XCPT_FRAME 1 RDI+8 cld @@ -426,15 +361,12 @@ system_call_fastpath: * Has incomplete stack frame and undefined top of stack. */ ret_from_sys_call: - movl $_TIF_ALLWORK_MASK,%edi - /* edi: flagmask */ -sysret_check: + testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) + jnz int_ret_from_sys_call_fixup /* Go the the slow path */ + LOCKDEP_SYS_EXIT DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx - andl %edi,%edx - jnz sysret_careful CFI_REMEMBER_STATE /* * sysretq will re-enable interrupts: @@ -448,49 +380,10 @@ sysret_check: USERGS_SYSRET64 CFI_RESTORE_STATE - /* Handle reschedules */ - /* edx: work, edi: workmask */ -sysret_careful: - bt $TIF_NEED_RESCHED,%edx - jnc sysret_signal - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi - SCHEDULE_USER - popq_cfi %rdi - jmp sysret_check - /* Handle a signal */ -sysret_signal: - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) -#ifdef CONFIG_AUDITSYSCALL - bt $TIF_SYSCALL_AUDIT,%edx - jc sysret_audit -#endif - /* - * We have a signal, or exit tracing or single-step. - * These all wind up with the iret return path anyway, - * so just join that path right now. - */ +int_ret_from_sys_call_fixup: FIXUP_TOP_OF_STACK %r11, -ARGOFFSET - jmp int_check_syscall_exit_work - -#ifdef CONFIG_AUDITSYSCALL - /* - * Return fast path for syscall audit. Call __audit_syscall_exit() - * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT - * masked off. - */ -sysret_audit: - movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */ - cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */ - setbe %al /* 1 if so, 0 if not */ - movzbl %al,%edi /* zero-extend that into %edi */ - call __audit_syscall_exit - movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi - jmp sysret_check -#endif /* CONFIG_AUDITSYSCALL */ + jmp int_ret_from_sys_call /* Do syscall tracing */ tracesys: @@ -626,19 +519,6 @@ END(\label) FORK_LIKE vfork FIXED_FRAME stub_iopl, sys_iopl -ENTRY(ptregscall_common) - DEFAULT_FRAME 1 8 /* offset 8: return address */ - RESTORE_TOP_OF_STACK %r11, 8 - movq_cfi_restore R15+8, r15 - movq_cfi_restore R14+8, r14 - movq_cfi_restore R13+8, r13 - movq_cfi_restore R12+8, r12 - movq_cfi_restore RBP+8, rbp - movq_cfi_restore RBX+8, rbx - ret $REST_SKIP /* pop extended registers */ - CFI_ENDPROC -END(ptregscall_common) - ENTRY(stub_execve) CFI_STARTPROC addq $8, %rsp @@ -779,7 +659,48 @@ END(interrupt) /* reserve pt_regs for scratch regs and rbp */ subq $ORIG_RAX-RBP, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP - SAVE_ARGS_IRQ + cld + /* start from rbp in pt_regs and jump over */ + movq_cfi rdi, (RDI-RBP) + movq_cfi rsi, (RSI-RBP) + movq_cfi rdx, (RDX-RBP) + movq_cfi rcx, (RCX-RBP) + movq_cfi rax, (RAX-RBP) + movq_cfi r8, (R8-RBP) + movq_cfi r9, (R9-RBP) + movq_cfi r10, (R10-RBP) + movq_cfi r11, (R11-RBP) + + /* Save rbp so that we can unwind from get_irq_regs() */ + movq_cfi rbp, 0 + + /* Save previous stack value */ + movq %rsp, %rsi + + leaq -RBP(%rsp),%rdi /* arg1 for handler */ + testl $3, CS-RBP(%rsi) + je 1f + SWAPGS + /* + * irq_count is used to check if a CPU is already on an interrupt stack + * or not. While this is essentially redundant with preempt_count it is + * a little cheaper to use a separate counter in the PDA (short of + * moving irq_enter into assembly, which would be too much work) + */ +1: incl PER_CPU_VAR(irq_count) + cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp + CFI_DEF_CFA_REGISTER rsi + + /* Store previous stack value */ + pushq %rsi + CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ + 0x77 /* DW_OP_breg7 */, 0, \ + 0x06 /* DW_OP_deref */, \ + 0x08 /* DW_OP_const1u */, SS+8-RBP, \ + 0x22 /* DW_OP_plus */ + /* We entered an interrupt context - irqs are off: */ + TRACE_IRQS_OFF + call \func .endm @@ -831,6 +752,60 @@ retint_swapgs: /* return to user-space */ */ DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_IRETQ + + /* + * Try to use SYSRET instead of IRET if we're returning to + * a completely clean 64-bit userspace context. + */ + movq (RCX-R11)(%rsp), %rcx + cmpq %rcx,(RIP-R11)(%rsp) /* RCX == RIP */ + jne opportunistic_sysret_failed + + /* + * On Intel CPUs, sysret with non-canonical RCX/RIP will #GP + * in kernel space. This essentially lets the user take over + * the kernel, since userspace controls RSP. It's not worth + * testing for canonicalness exactly -- this check detects any + * of the 17 high bits set, which is true for non-canonical + * or kernel addresses. (This will pessimize vsyscall=native. + * Big deal.) + * + * If virtual addresses ever become wider, this will need + * to be updated to remain correct on both old and new CPUs. + */ + .ifne __VIRTUAL_MASK_SHIFT - 47 + .error "virtual address width changed -- sysret checks need update" + .endif + shr $__VIRTUAL_MASK_SHIFT, %rcx + jnz opportunistic_sysret_failed + + cmpq $__USER_CS,(CS-R11)(%rsp) /* CS must match SYSRET */ + jne opportunistic_sysret_failed + + movq (R11-ARGOFFSET)(%rsp), %r11 + cmpq %r11,(EFLAGS-ARGOFFSET)(%rsp) /* R11 == RFLAGS */ + jne opportunistic_sysret_failed + + testq $X86_EFLAGS_RF,%r11 /* sysret can't restore RF */ + jnz opportunistic_sysret_failed + + /* nothing to check for RSP */ + + cmpq $__USER_DS,(SS-ARGOFFSET)(%rsp) /* SS must match SYSRET */ + jne opportunistic_sysret_failed + + /* + * We win! This label is here just for ease of understanding + * perf profiles. Nothing jumps here. + */ +irq_return_via_sysret: + CFI_REMEMBER_STATE + RESTORE_ARGS 1,8,1 + movq (RSP-RIP)(%rsp),%rsp + USERGS_SYSRET64 + CFI_RESTORE_STATE + +opportunistic_sysret_failed: SWAPGS jmp restore_args @@ -1048,6 +1023,11 @@ ENTRY(\sym) CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 .if \paranoid + .if \paranoid == 1 + CFI_REMEMBER_STATE + testl $3, CS(%rsp) /* If coming from userspace, switch */ + jnz 1f /* stacks. */ + .endif call save_paranoid .else call error_entry @@ -1088,6 +1068,36 @@ ENTRY(\sym) jmp error_exit /* %ebx: no swapgs flag */ .endif + .if \paranoid == 1 + CFI_RESTORE_STATE + /* + * Paranoid entry from userspace. Switch stacks and treat it + * as a normal entry. This means that paranoid handlers + * run in real process context if user_mode(regs). + */ +1: + call error_entry + + DEFAULT_FRAME 0 + + movq %rsp,%rdi /* pt_regs pointer */ + call sync_regs + movq %rax,%rsp /* switch stack */ + + movq %rsp,%rdi /* pt_regs pointer */ + + .if \has_error_code + movq ORIG_RAX(%rsp),%rsi /* get error code */ + movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ + .else + xorl %esi,%esi /* no error code */ + .endif + + call \do_sym + + jmp error_exit /* %ebx: no swapgs flag */ + .endif + CFI_ENDPROC END(\sym) .endm @@ -1108,7 +1118,7 @@ idtentry overflow do_overflow has_error_code=0 idtentry bounds do_bounds has_error_code=0 idtentry invalid_op do_invalid_op has_error_code=0 idtentry device_not_available do_device_not_available has_error_code=0 -idtentry double_fault do_double_fault has_error_code=1 paranoid=1 +idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 idtentry invalid_TSS do_invalid_TSS has_error_code=1 idtentry segment_not_present do_segment_not_present has_error_code=1 @@ -1289,16 +1299,14 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector( #endif /* - * "Paranoid" exit path from exception stack. - * Paranoid because this is used by NMIs and cannot take - * any kernel state for granted. - * We don't do kernel preemption checks here, because only - * NMI should be common and it does not enable IRQs and - * cannot get reschedule ticks. + * "Paranoid" exit path from exception stack. This is invoked + * only on return from non-NMI IST interrupts that came + * from kernel space. * - * "trace" is 0 for the NMI handler only, because irq-tracing - * is fundamentally NMI-unsafe. (we cannot change the soft and - * hard flags at once, atomically) + * We may be returning to very strange contexts (e.g. very early + * in syscall entry), so checking for preemption here would + * be complicated. Fortunately, we there's no good reason + * to try to handle preemption here. */ /* ebx: no swapgs flag */ @@ -1308,43 +1316,14 @@ ENTRY(paranoid_exit) TRACE_IRQS_OFF_DEBUG testl %ebx,%ebx /* swapgs needed? */ jnz paranoid_restore - testl $3,CS(%rsp) - jnz paranoid_userspace -paranoid_swapgs: TRACE_IRQS_IRETQ 0 SWAPGS_UNSAFE_STACK RESTORE_ALL 8 - jmp irq_return + INTERRUPT_RETURN paranoid_restore: TRACE_IRQS_IRETQ_DEBUG 0 RESTORE_ALL 8 - jmp irq_return -paranoid_userspace: - GET_THREAD_INFO(%rcx) - movl TI_flags(%rcx),%ebx - andl $_TIF_WORK_MASK,%ebx - jz paranoid_swapgs - movq %rsp,%rdi /* &pt_regs */ - call sync_regs - movq %rax,%rsp /* switch stack for scheduling */ - testl $_TIF_NEED_RESCHED,%ebx - jnz paranoid_schedule - movl %ebx,%edx /* arg3: thread flags */ - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_NONE) - xorl %esi,%esi /* arg2: oldset */ - movq %rsp,%rdi /* arg1: &pt_regs */ - call do_notify_resume - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - jmp paranoid_userspace -paranoid_schedule: - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) - SCHEDULE_USER - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF - jmp paranoid_userspace + INTERRUPT_RETURN CFI_ENDPROC END(paranoid_exit) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 63ce838e5a54..28d28f5eb8f4 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -69,16 +69,9 @@ static void call_on_stack(void *func, void *stack) : "memory", "cc", "edx", "ecx", "eax"); } -/* how to get the current stack pointer from C */ -#define current_stack_pointer ({ \ - unsigned long sp; \ - asm("mov %%esp,%0" : "=g" (sp)); \ - sp; \ -}) - static inline void *current_stack(void) { - return (void *)(current_stack_pointer & ~(THREAD_SIZE - 1)); + return (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1)); } static inline int @@ -103,7 +96,7 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) /* Save the next esp at the bottom of the stack */ prev_esp = (u32 *)irqstk; - *prev_esp = current_stack_pointer; + *prev_esp = current_stack_pointer(); if (unlikely(overflow)) call_on_stack(print_stack_overflow, isp); @@ -156,7 +149,7 @@ void do_softirq_own_stack(void) /* Push the previous esp onto the stack */ prev_esp = (u32 *)irqstk; - *prev_esp = current_stack_pointer; + *prev_esp = current_stack_pointer(); call_on_stack(__do_softirq, isp); } diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index ed37a768d0fc..2a33c8f68319 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -740,12 +740,6 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) { user_exit(); -#ifdef CONFIG_X86_MCE - /* notify userspace of pending MCEs */ - if (thread_info_flags & _TIF_MCE_NOTIFY) - mce_notify_process(); -#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */ - if (thread_info_flags & _TIF_UPROBE) uprobe_notify_resume(regs); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 88900e288021..c74f2f5652da 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -108,6 +108,88 @@ static inline void preempt_conditional_cli(struct pt_regs *regs) preempt_count_dec(); } +enum ctx_state ist_enter(struct pt_regs *regs) +{ + enum ctx_state prev_state; + + if (user_mode_vm(regs)) { + /* Other than that, we're just an exception. */ + prev_state = exception_enter(); + } else { + /* + * We might have interrupted pretty much anything. In + * fact, if we're a machine check, we can even interrupt + * NMI processing. We don't want in_nmi() to return true, + * but we need to notify RCU. + */ + rcu_nmi_enter(); + prev_state = IN_KERNEL; /* the value is irrelevant. */ + } + + /* + * We are atomic because we're on the IST stack (or we're on x86_32, + * in which case we still shouldn't schedule). + * + * This must be after exception_enter(), because exception_enter() + * won't do anything if in_interrupt() returns true. + */ + preempt_count_add(HARDIRQ_OFFSET); + + /* This code is a bit fragile. Test it. */ + rcu_lockdep_assert(rcu_is_watching(), "ist_enter didn't work"); + + return prev_state; +} + +void ist_exit(struct pt_regs *regs, enum ctx_state prev_state) +{ + /* Must be before exception_exit. */ + preempt_count_sub(HARDIRQ_OFFSET); + + if (user_mode_vm(regs)) + return exception_exit(prev_state); + else + rcu_nmi_exit(); +} + +/** + * ist_begin_non_atomic() - begin a non-atomic section in an IST exception + * @regs: regs passed to the IST exception handler + * + * IST exception handlers normally cannot schedule. As a special + * exception, if the exception interrupted userspace code (i.e. + * user_mode_vm(regs) would return true) and the exception was not + * a double fault, it can be safe to schedule. ist_begin_non_atomic() + * begins a non-atomic section within an ist_enter()/ist_exit() region. + * Callers are responsible for enabling interrupts themselves inside + * the non-atomic section, and callers must call is_end_non_atomic() + * before ist_exit(). + */ +void ist_begin_non_atomic(struct pt_regs *regs) +{ + BUG_ON(!user_mode_vm(regs)); + + /* + * Sanity check: we need to be on the normal thread stack. This + * will catch asm bugs and any attempt to use ist_preempt_enable + * from double_fault. + */ + BUG_ON(((current_stack_pointer() ^ this_cpu_read_stable(kernel_stack)) + & ~(THREAD_SIZE - 1)) != 0); + + preempt_count_sub(HARDIRQ_OFFSET); +} + +/** + * ist_end_non_atomic() - begin a non-atomic section in an IST exception + * + * Ends a non-atomic section started with ist_begin_non_atomic(). + */ +void ist_end_non_atomic(void) +{ + preempt_count_add(HARDIRQ_OFFSET); +} + static nokprobe_inline int do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str, struct pt_regs *regs, long error_code) @@ -251,6 +333,8 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code) * end up promoting it to a doublefault. In that case, modify * the stack to make it look like we just entered the #GP * handler from user space, similar to bad_iret. + * + * No need for ist_enter here because we don't use RCU. */ if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY && regs->cs == __KERNEL_CS && @@ -263,12 +347,12 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code) normal_regs->orig_ax = 0; /* Missing (lost) #GP error code */ regs->ip = (unsigned long)general_protection; regs->sp = (unsigned long)&normal_regs->orig_ax; + return; } #endif - exception_enter(); - /* Return not checked because double check cannot be ignored */ + ist_enter(regs); /* Discard prev_state because we won't return. */ notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV); |