diff options
116 files changed, 6435 insertions, 1272 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs new file mode 100644 index 000000000000..14343e237e83 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs @@ -0,0 +1,9 @@ +What: /config/usb-gadget/gadget/functions/ffs.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: The purpose of this directory is to create and remove it. + + A corresponding USB function instance is created/removed. + There are no attributes here. + + All parameters are set through FunctionFS. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback new file mode 100644 index 000000000000..852b2365a5b5 --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback @@ -0,0 +1,8 @@ +What: /config/usb-gadget/gadget/functions/Loopback.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: + The attributes: + + qlen - depth of loopback queue + bulk_buflen - buffer length diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink new file mode 100644 index 000000000000..a30f3093ef6c --- /dev/null +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -0,0 +1,12 @@ +What: /config/usb-gadget/gadget/functions/SourceSink.name +Date: Nov 2013 +KenelVersion: 3.13 +Description: + The attributes: + + pattern - 0 (all zeros), 1 (mod63), 2 (none) + isoc_interval - 1..16 + isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) + isoc_mult - 0..2 (hs/ss only) + isoc_maxburst - 0..15 (ss only) + qlen - buffer length diff --git a/Documentation/ABI/testing/sysfs-platform-tahvo-usb b/Documentation/ABI/testing/sysfs-platform-tahvo-usb new file mode 100644 index 000000000000..f6e20ce4b538 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-tahvo-usb @@ -0,0 +1,16 @@ +What: /sys/bus/platform/devices/tahvo-usb/otg_mode +Date: December 2013 +Contact: Aaro Koskinen <aaro.koskinen@iki.fi> +Description: + Set or read the current OTG mode. Valid values are "host" and + "peripheral". + + Reading: returns the current mode. + +What: /sys/bus/platform/devices/tahvo-usb/vbus +Date: December 2013 +Contact: Aaro Koskinen <aaro.koskinen@iki.fi> +Description: + Read the current VBUS state. + + Reading: returns "on" or "off". diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt new file mode 100644 index 000000000000..3dc8b3d2ffbb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt index 1a1b7cfa4845..a1753ed0dd84 100644 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ b/Documentation/devicetree/bindings/staging/dwc2.txt @@ -5,6 +5,14 @@ Required properties: - compatible : "snps,dwc2" - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties Example: @@ -12,4 +20,8 @@ Example: compatible = "ralink,rt3050-usb, snps,dwc2"; reg = <0x101c0000 40000>; interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt new file mode 100644 index 000000000000..0c5118f7a916 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt @@ -0,0 +1,28 @@ +USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + +The GRUSBDC USB Device Controller core is available in the GRLIB VHDL +IP core library. + +Note: In the ordinary environment for the core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_USBDC" or "01_021" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +- epibufsizes : An array of buffer sizes for IN endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 090e5e22bd2b..c495135115cb 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -87,6 +87,8 @@ Required properties: e.g. USB3 PHY and SATA PHY on OMAP5. "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on DRA7 platform. + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register for other types. diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 45e5ac707cbb..2c263051dc51 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -8,43 +8,7 @@ #define is_usb0_device(config) 0 #endif -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - |