summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/regulator/max1586-regulator.txt28
-rw-r--r--Documentation/devicetree/bindings/regulator/max77802.txt53
-rw-r--r--drivers/regulator/Kconfig9
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/internal.h10
-rw-r--r--drivers/regulator/max1586.c81
-rw-r--r--drivers/regulator/max77802.c586
-rw-r--r--include/linux/regulator/max1586.h2
8 files changed, 767 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
new file mode 100644
index 000000000000..c050c1744cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
@@ -0,0 +1,28 @@
+Maxim MAX1586 voltage regulator
+
+Required properties:
+- compatible: must be "maxim,max1586"
+- reg: I2C slave address, usually 0x14
+- v3-gain: integer specifying the V3 gain as per datasheet
+ (1 + R24/R25 + R24/185.5kOhm)
+- any required generic properties defined in regulator.txt
+
+Example:
+
+ i2c_master {
+ max1586@14 {
+ compatible = "maxim,max1586";
+ reg = <0x14>;
+ v3-gain = <1000000>;
+
+ regulators {
+ vcc_core: v3 {
+ regulator-name = "vcc_core";
+ regulator-compatible = "Output_V3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1705000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
new file mode 100644
index 000000000000..5aeaffc0f1f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -0,0 +1,53 @@
+Binding for Maxim MAX77802 regulators
+
+This is a part of device tree bindings of MAX77802 multi-function device.
+More information can be found in bindings/mfd/max77802.txt file.
+
+The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- regulators : The regulators of max77802 have to be instantiated
+ under subnode named "regulators" using the following format.
+
+ regulator-name {
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+The regulator node name should be initialized with a string to get matched
+with their hardware counterparts as follow. The valid names are:
+
+ -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
+ and 32-35.
+ example: LDO1, LDO2, LDO35.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 10.
+ example: BUCK1, BUCK5, BUCK10.
+Example:
+
+ max77802@09 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulators {
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 40eab775047e..58a6ec125327 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -405,6 +405,15 @@ config REGULATOR_MAX77693
and one current regulator 'CHARGER'. This is suitable for
Exynos-4x12 chips.
+config REGULATOR_MAX77802
+ tristate "Maxim 77802 regulator"
+ depends on MFD_MAX77686
+ help
+ This driver controls a Maxim 77802 regulator
+ via I2C bus. The provided regulator is suitable for
+ Exynos5420/Exynos5800 SoCs to control various voltages.
+ It includes support for control of voltage and ramp speed.
+
config REGULATOR_MC13XXX_CORE
tristate
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 662834856c37..f0e227d4f5a5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
+obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h
index a6043ad32ead..80ba2a35a04b 100644
--- a/drivers/regulator/internal.h
+++ b/drivers/regulator/internal.h
@@ -35,8 +35,18 @@ struct regulator {
struct dentry *debugfs;
};
+#ifdef CONFIG_OF
struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
const struct regulator_desc *desc,
struct device_node **node);
+#else
+static inline struct regulator_init_data *
+regulator_of_get_init_data(struct device *dev,
+ const struct regulator_desc *desc,
+ struct device_node **node)
+{
+ return NULL;
+}
+#endif
#endif
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index d23d0577754b..86db310d5304 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -24,6 +24,8 @@
#include <linux/regulator/driver.h>
#include <linux/slab.h>
#include <linux/regulator/max1586.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
#define MAX1586_V3_MAX_VSEL 31
#define MAX1586_V6_MAX_VSEL 3
@@ -157,13 +159,87 @@ static struct regulator_desc max1586_reg[] = {
},
};
+static int of_get_max1586_platform_data(struct device *dev,
+ struct max1586_platform_data *pdata)
+{
+ struct max1586_subdev_data *sub;
+ struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)];
+ struct device_node *np = dev->of_node;
+ int i, matched;
+
+ if (of_property_read_u32(np, "v3-gain",
+ &pdata->v3_gain) < 0) {
+ dev_err(dev, "%s has no 'v3-gain' property\n", np->full_name);
+ return -EINVAL;
+ }
+
+ np = of_get_child_by_name(np, "regulators");
+ if (!np) {
+ dev_err(dev, "missing 'regulators' subnode in DT\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(rmatch); i++)
+ rmatch[i].name = max1586_reg[i].name;
+
+ matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
+ of_node_put(np);
+ /*
+ * If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
+ * return 0, which signals the normal situation where no subregulator is
+ * available. This is normal because the max1586 doesn't provide any
+ * readback support, so the subregulators can't report any status
+ * anyway. If matched < 0, return the error.
+ */
+ if (matched <= 0)
+ return matched;
+
+ pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) *
+ matched, GFP_KERNEL);
+ if (!pdata->subdevs)
+ return -ENOMEM;
+
+ pdata->num_subdevs = matched;
+ sub = pdata->subdevs;
+
+ for (i = 0; i < matched; i++) {
+ sub->id = i;
+ sub->name = rmatch[i].of_node->name;
+ sub->platform_data = rmatch[i].init_data;
+ sub++;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id max1586_of_match[] = {
+ { .compatible = "maxim,max1586", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, max1586_of_match);
+
static int max1586_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
- struct max1586_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct max1586_platform_data *pdata, pdata_of;
struct regulator_config config = { };
struct max1586_data *max1586;
- int i, id;
+ int i, id, ret;
+ const struct of_device_id *match;
+
+ pdata = dev_get_platdata(&client->dev);
+ if (client->dev.of_node && !pdata) {
+ match = of_match_device(of_match_ptr(max1586_of_match),
+ &client->dev);
+ if (!match) {
+ dev_err(&client->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
+ if (ret < 0)
+ return ret;
+ pdata = &pdata_of;
+ }
max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
GFP_KERNEL);
@@ -229,6 +305,7 @@ static struct i2c_driver max1586_pmic_driver = {
.driver = {
.name = "max1586",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(max1586_of_match),
},
.id_table = max1586_id,
};
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
new file mode 100644
index 000000000000..d89792b084e9
--- /dev/null
+++ b/drivers/regulator/max77802.c
@@ -0,0 +1,586 @@
+/*
+ * max77802.c - Regulator driver for the Maxim 77802
+ *
+ * Copyright (C) 2013-2014 Google, Inc
+ * Simon Glass <sjg@chromium.org>
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Chiwoong Byun <woong.byun@smasung.com>
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+
+/* Default ramp delay in case it is not manually set */
+#define MAX77802_RAMP_DELAY 100000 /* uV/us */
+
+#define MAX77802_OPMODE_SHIFT_LDO 6
+#define MAX77802_OPMODE_BUCK234_SHIFT 4
+#define MAX77802_OPMODE_MASK 0x3
+
+#define MAX77802_VSEL_MASK 0x3F
+#define MAX77802_DVS_VSEL_MASK 0xFF
+
+#define MAX77802_RAMP_RATE_MASK_2BIT 0xC0
+#define MAX77802_RAMP_RATE_SHIFT_2BIT 6
+#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0
+#define MAX77802_RAMP_RATE_SHIFT_4BIT 4
+
+/* MAX77802 has two register formats: 2-bit and 4-bit */
+static const unsigned int ramp_table_77802_2bit[] = {
+ 12500,
+ 25000,
+ 50000,
+ 100000,
+};
+
+static unsigned int ramp_table_77802_4bit[] = {
+ 1000, 2000, 3030, 4000,
+ 5000, 5880, 7140, 8330,
+ 9090, 10000, 11110, 12500,
+ 16670, 25000, 50000, 100000,
+};
+
+struct max77802_regulator_prv {
+ unsigned int opmode[MAX77802_REG_MAX];
+};
+
+static int max77802_get_opmode_shift(int id)
+{
+ if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 &&
+ id <= MAX77802_BUCK10))
+ return 0;
+
+ if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4)
+ return MAX77802_OPMODE_BUCK234_SHIFT;
+
+ if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35)
+ return MAX77802_OPMODE_SHIFT_LDO;
+
+ return -EINVAL;
+}
+
+/*
+ * Some BUCKS supports Normal[ON/OFF] mode during suspend
+ *
+ * BUCK 1, 6, 2-4, 5, 7-10 (all)
+ *
+ * The other mode (0x02) will make PWRREQ switch between normal
+ * and low power.
+ */
+static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int val = MAX77802_OPMODE_STANDBY;
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ int shift = max77802_get_opmode_shift(id);
+
+ max77802->opmode[id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
+/*
+ * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state
+ * (Enable Control Logic1 by PWRREQ)
+ *
+ * LDOs 2, 4-19, 22-35.
+ *
+ */
+static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ unsigned int val;
+ int shift = max77802_get_opmode_shift(id);
+
+ switch (mode) {
+ case REGULATOR_MODE_IDLE: /* ON in LP Mode */
+ val = MAX77802_OPMODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
+ val = MAX77802_OPMODE_NORMAL;
+ break;
+ case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */
+ val = MAX77802_OPMODE_STANDBY;
+ break;
+ default:
+ dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77802->opmode[id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
+/*
+ * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs
+ * (Enable Control Logic2 by PWRREQ)
+ *
+ * LDOs 1, 20, 21, and 3,
+ *
+ */
+static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ unsigned int val;
+ int shift = max77802_get_opmode_shift(id);
+
+ switch (mode) {
+ case REGULATOR_MODE_IDLE: /* ON in LP Mode */
+ val = MAX77802_OPMODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
+ val = MAX77802_OPMODE_NORMAL;
+ break;
+ default:
+ dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77802->opmode[id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
+static int max77802_enable(struct regulator_dev *rdev)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ int shift = max77802_get_opmode_shift(id);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ max77802->opmode[id] << shift);
+}
+
+static int max77802_find_ramp_value(struct regulator_dev *rdev,
+ const unsigned int limits[], int size,
+ unsigned int ramp_delay)
+{
+ int i;
+
+ for (i = 0; i < size; i++) {
+ if (ramp_delay <= limits[i])
+ return i;
+ }
+
+ /* Use maximum value for no ramp control */
+ dev_warn(&rdev->dev, "%s: ramp_delay: %d not supported, setting 100000\n",
+ rdev->desc->name, ramp_delay);
+ return size - 1;
+}
+
+/* Used for BUCKs 2-4 */
+static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ int id = rdev_get_id(rdev);
+ unsigned int ramp_value;
+
+ if (id > MAX77802_BUCK4) {
+ dev_warn(&rdev->dev,
+ "%s: regulator: ramp delay not supported\n",
+ rdev->desc->name);
+ return -EINVAL;
+ }
+ ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,
+ ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77802_RAMP_RATE_MASK_2BIT,
+ ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT);
+}
+
+/* For BUCK1, 6 */
+static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ unsigned int ramp_value;
+
+ ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit,
+ ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77802_RAMP_RATE_MASK_4BIT,
+ ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT);
+}
+
+/*
+ * LDOs 2, 4-19, 22-35
+ */
+static struct regulator_ops max77802_ldo_ops_logic1 = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1,
+};
+
+/*
+ * LDOs 1, 20, 21, 3
+ */
+static struct regulator_ops max77802_ldo_ops_logic2 = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2,
+};
+
+/* BUCKS 1, 6 */
+static struct regulator_ops max77802_buck_16_dvs_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_4bit,
+ .set_suspend_disable = max77802_buck_set_suspend_disable,
+};
+
+/* BUCKs 2-4, 5, 7-10 */
+static struct regulator_ops max77802_buck_dvs_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_disable = max77802_buck_set_suspend_disable,
+};
+
+/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */
+#define regulator_77802_desc_p_ldo(num, supply, log) { \
+ .name = "LDO"#num, \
+ .id = MAX77802_LDO##num, \
+ .supply_name = "inl"#supply, \
+ .ops = &max77802_ldo_ops_logic##log, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+}
+
+/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
+#define regulator_77802_desc_n_ldo(num, supply, log) { \
+ .name = "LDO"#num, \
+ .id = MAX77802_LDO##num, \
+ .supply_name = "inl"#supply, \
+ .ops = &max77802_ldo_ops_logic##log, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 25000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+}
+
+/* BUCKs 1, 6 */
+#define regulator_77802_desc_16_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .supply_name = "inb"#num, \
+ .ops = &max77802_buck_16_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 612500, \
+ .uV_step = 6250, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 8, \
+ .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \
+ .vsel_mask = MAX77802_DVS_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+/* BUCKS 2-4 */
+#define regulator_77802_desc_234_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .supply_name = "inb"#num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 600000, \
+ .uV_step = 6250, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 0x91, \
+ .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \
+ .vsel_mask = MAX77802_DVS_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
+ .enable_mask = MAX77802_OPMODE_MASK << \
+ MAX77802_OPMODE_BUCK234_SHIFT, \
+}
+
+/* BUCK 5 */
+#define regulator_77802_desc_buck5(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .supply_name = "inb"#num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_BUCK5OUT, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK5CTRL, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+/* BUCKs 7-10 */
+#define regulator_77802_desc_buck7_10(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .supply_name = "inb"#num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_77802_desc_16_buck(1),
+ regulator_77802_desc_234_buck(2),
+ regulator_77802_desc_234_buck(3),
+ regulator_77802_desc_234_buck(4),
+ regulator_77802_desc_buck5(5),
+ regulator_77802_desc_16_buck(6),
+ regulator_77802_desc_buck7_10(7),
+ regulator_77802_desc_buck7_10(8),
+ regulator_77802_desc_buck7_10(9),
+ regulator_77802_desc_buck7_10(10),
+ regulator_77802_desc_n_ldo(1, 10, 2),
+ regulator_77802_desc_n_ldo(2, 10, 1),
+ regulator_77802_desc_p_ldo(3, 3, 2),
+ regulator_77802_desc_p_ldo(4, 6, 1),
+ regulator_77802_desc_p_ldo(5, 3, 1),
+ regulator_77802_desc_p_ldo(6, 3, 1),
+ regulator_77802_desc_p_ldo(7, 3, 1),
+ regulator_77802_desc_n_ldo(8, 1, 1),
+ regulator_77802_desc_p_ldo(9, 5, 1),
+ regulator_77802_desc_p_ldo(10, 4, 1),
+ regulator_77802_desc_p_ldo(11, 4, 1),
+ regulator_77802_desc_p_ldo(12, 9, 1),
+ regulator_77802_desc_p_ldo(13, 4, 1),
+ regulator_77802_desc_p_ldo(14, 4, 1),
+ regulator_77802_desc_n_ldo(15, 1, 1),
+ regulator_77802_desc_n_ldo(17, 2, 1),
+ regulator_77802_desc_p_ldo(18, 7, 1),
+ regulator_77802_desc_p_ldo(19, 5, 1),
+ regulator_77802_desc_p_ldo(20, 7, 2),
+ regulator_77802_desc_p_ldo(21, 6, 2),
+ regulator_77802_desc_p_ldo(23, 9, 1),
+ regulator_77802_desc_p_ldo(24, 6, 1),
+ regulator_77802_desc_p_ldo(25, 9, 1),
+ regulator_77802_desc_p_ldo(26, 9, 1),
+ regulator_77802_desc_n_ldo(27, 2, 1),
+ regulator_77802_desc_p_ldo(28, 7, 1),
+ regulator_77802_desc_p_ldo(29, 7, 1),
+ regulator_77802_desc_n_ldo(30, 2, 1),
+ regulator_77802_desc_p_ldo(32, 9, 1),
+ regulator_77802_desc_p_ldo(33, 6, 1),
+ regulator_77802_desc_p_ldo(34, 9, 1),
+ regulator_77802_desc_n_ldo(35, 2, 1),
+};
+
+#ifdef CONFIG_OF
+static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct max77686_platform_data *pdata)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *pmic_np, *regulators_np;
+ struct max77686_regulator_data *rdata;
+ struct of_regulator_match rmatch;
+ unsigned int i;
+
+ pmic_np = iodev->dev->of_node;
+ regulators_np = of_get_child_by_name(pmic_np, "regulators");
+ if (!regulators_np) {
+ dev_err(&pdev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ pdata->num_regulators = ARRAY_SIZE(regulators);
+ rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ of_node_put(regulators_np);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ rmatch.name = regulators[i].name;
+ rmatch.init_data = NULL;
+ rmatch.of_node = NULL;
+ if (of_regulator_match(&pdev->dev, regulators_np, &rmatch,
+ 1) != 1) {
+ dev_warn(&pdev->dev, "No matching regulator for '%s'\n",
+ rmatch.name);
+ continue;
+ }
+ rdata[i].initdata = rmatch.init_data;
+ rdata[i].of_node = rmatch.of_node;
+ rdata[i].id = regulators[i].id;
+ }
+
+ pdata->regulators = rdata;
+ of_node_put(regulators_np);
+
+ return 0;
+}
+#else
+static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct max77686_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static int max77802_pmic_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct max77802_regulator_prv *max77802;
+ int i, ret = 0, val;
+ struct regulator_config config = { };
+
+ /* This is allocated by the MFD driver */
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data found for regulator\n");
+ return -ENODEV;
+ }
+
+ max77802 = devm_kzalloc(&pdev->dev,
+ sizeof(struct max77802_regulator_prv),
+ GFP_KERNEL);
+ if (!max77802)
+ return -ENOMEM;
+
+ if (iodev->dev->of_node) {
+ ret = max77802_pmic_dt_parse_pdata(pdev, pdata);
+ if (ret)
+ return ret;
+ }
+
+ config.dev = iodev->dev;
+ config.regmap = iodev->regmap;
+ config.driver_data = max77802;
+ platform_set_drvdata(pdev, max77802);
+
+ for (i = 0; i < MAX77802_REG_MAX; i++) {
+ struct regulator_dev *rdev;
+ int id = pdata->regulators[i].id;
+ int shift = max77802_get_opmode_shift(id);
+
+ config.init_data = pdata->regulators[i].initdata;
+ config.of_node = pdata->regulators[i].of_node;
+
+ ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val);
+ val = val >> shift & MAX77802_OPMODE_MASK;
+
+ /*
+ * If the regulator is disabled and the system warm rebooted,
+ * the hardware reports OFF as the regulator operating mode.
+ * Default to operating mode NORMAL in that case.
+ */
+ if (val == MAX77802_OPMODE_OFF)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+ else
+ max77802->opmode[id] = val;
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &regulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "regulator init failed for %d\n", i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77802_pmic_id[] = {
+ {"max77802-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77802_pmic_id);
+
+static struct platform_driver max77802_pmic_driver = {
+ .driver = {
+ .name = "max77802-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77802_pmic_probe,
+ .id_table = max77802_pmic_id,
+};
+
+module_platform_driver(max77802_pmic_driver);
+
+MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver");
+MODULE_AUTHOR("Simon Glass <sjg@chromium.org>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index de9a7fae20be..cedd0febe882 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -40,7 +40,7 @@
*/
struct max1586_subdev_data {
int id;
- char *name;
+ const char *name;
struct regulator_init_data *platform_data;
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-21 19:43:11 +0000