diff options
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_main.c | 1483 |
1 files changed, 740 insertions, 743 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index c7b9bbbef3aa..24fbbc928d66 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -51,9 +51,6 @@ static const struct pci_device_id igc_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, igc_pci_tbl); -/* forward declaration */ -static int igc_sw_init(struct igc_adapter *); - enum latency_range { lowest_latency = 0, low_latency = 1, @@ -2354,6 +2351,746 @@ static void igc_irq_disable(struct igc_adapter *adapter) } } +void igc_set_flag_queue_pairs(struct igc_adapter *adapter, + const u32 max_rss_queues) +{ + /* Determine if we need to pair queues. */ + /* If rss_queues > half of max_rss_queues, pair the queues in + * order to conserve interrupts due to limited supply. + */ + if (adapter->rss_queues > (max_rss_queues / 2)) + adapter->flags |= IGC_FLAG_QUEUE_PAIRS; + else + adapter->flags &= ~IGC_FLAG_QUEUE_PAIRS; +} + +unsigned int igc_get_max_rss_queues(struct igc_adapter *adapter) +{ + unsigned int max_rss_queues; + + /* Determine the maximum number of RSS queues supported. */ + max_rss_queues = IGC_MAX_RX_QUEUES; + + return max_rss_queues; +} + +static void igc_init_queue_configuration(struct igc_adapter *adapter) +{ + u32 max_rss_queues; + + max_rss_queues = igc_get_max_rss_queues(adapter); + adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus()); + + igc_set_flag_queue_pairs(adapter, max_rss_queues); +} + +/** + * igc_reset_q_vector - Reset config for interrupt vector + * @adapter: board private structure to initialize + * @v_idx: Index of vector to be reset + * + * If NAPI is enabled it will delete any references to the + * NAPI struct. This is preparation for igc_free_q_vector. + */ +static void igc_reset_q_vector(struct igc_adapter *adapter, int v_idx) +{ + struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; + + /* if we're coming from igc_set_interrupt_capability, the vectors are + * not yet allocated + */ + if (!q_vector) + return; + + if (q_vector->tx.ring) + adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; + + if (q_vector->rx.ring) + adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; + + netif_napi_del(&q_vector->napi); +} + +/** + * igc_free_q_vector - Free memory allocated for specific interrupt vector + * @adapter: board private structure to initialize + * @v_idx: Index of vector to be freed + * + * This function frees the memory allocated to the q_vector. + */ +static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx) +{ + struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; + + adapter->q_vector[v_idx] = NULL; + + /* igc_get_stats64() might access the rings on this vector, + * we must wait a grace period before freeing it. + */ + if (q_vector) + kfree_rcu(q_vector, rcu); +} + +/** + * igc_free_q_vectors - Free memory allocated for interrupt vectors + * @adapter: board private structure to initialize + * + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + */ +static void igc_free_q_vectors(struct igc_adapter *adapter) +{ + int v_idx = adapter->num_q_vectors; + + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) { + igc_reset_q_vector(adapter, v_idx); + igc_free_q_vector(adapter, v_idx); + } +} + +/** + * igc_update_itr - update the dynamic ITR value based on statistics + * @q_vector: pointer to q_vector + * @ring_container: ring info to update the itr for + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * NOTE: These calculations are only valid when operating in a single- + * queue environment. + */ +static void igc_update_itr(struct igc_q_vector *q_vector, + struct igc_ring_container *ring_container) +{ + unsigned int packets = ring_container->total_packets; + unsigned int bytes = ring_container->total_bytes; + u8 itrval = ring_container->itr; + + /* no packets, exit with status unchanged */ + if (packets == 0) + return; + + switch (itrval) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes / packets > 8000) + itrval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) + itrval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes / packets > 8000) + itrval = bulk_latency; + else if ((packets < 10) || ((bytes / packets) > 1200)) + itrval = bulk_latency; + else if ((packets > 35)) + itrval = lowest_latency; + } else if (bytes / packets > 2000) { + itrval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + itrval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + itrval = low_latency; + } else if (bytes < 1500) { + itrval = low_latency; + } + break; + } + + /* clear work counters since we have the values we need */ + ring_container->total_bytes = 0; + ring_container->total_packets = 0; + + /* write updated itr to ring container */ + ring_container->itr = itrval; +} + +static void igc_set_itr(struct igc_q_vector *q_vector) +{ + struct igc_adapter *adapter = q_vector->adapter; + u32 new_itr = q_vector->itr_val; + u8 current_itr = 0; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + current_itr = 0; + new_itr = IGC_4K_ITR; + goto set_itr_now; + default: + break; + } + + igc_update_itr(q_vector, &q_vector->tx); + igc_update_itr(q_vector, &q_vector->rx); + + current_itr = max(q_vector->rx.itr, q_vector->tx.itr); + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = IGC_70K_ITR; /* 70,000 ints/sec */ + break; + case low_latency: + new_itr = IGC_20K_ITR; /* 20,000 ints/sec */ + break; + case bulk_latency: + new_itr = IGC_4K_ITR; /* 4,000 ints/sec */ + break; + default: + break; + } + +set_itr_now: + if (new_itr != q_vector->itr_val) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing + */ + new_itr = new_itr > q_vector->itr_val ? + max((new_itr * q_vector->itr_val) / + (new_itr + (q_vector->itr_val >> 2)), + new_itr) : new_itr; + /* Don't write the value here; it resets the adapter's + * internal timer, and causes us to delay far longer than + * we should between interrupts. Instead, we write the ITR + * value at the beginning of the next interrupt so the timing + * ends up being correct. + */ + q_vector->itr_val = new_itr; + q_vector->set_itr = 1; + } +} + +static void igc_reset_interrupt_capability(struct igc_adapter *adapter) +{ + int v_idx = adapter->num_q_vectors; + + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & IGC_FLAG_HAS_MSI) { + pci_disable_msi(adapter->pdev); + } + + while (v_idx--) + igc_reset_q_vector(adapter, v_idx); +} + +/** + * igc_set_interrupt_capability - set MSI or MSI-X if supported + * @adapter: Pointer to adapter structure + * @msix: boolean value for MSI-X capability + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + */ +static void igc_set_interrupt_capability(struct igc_adapter *adapter, + bool msix) +{ + int numvecs, i; + int err; + + if (!msix) + goto msi_only; + adapter->flags |= IGC_FLAG_HAS_MSIX; + + /* Number of supported queues. */ + adapter->num_rx_queues = adapter->rss_queues; + + adapter->num_tx_queues = adapter->rss_queues; + + /* start with one vector for every Rx queue */ + numvecs = adapter->num_rx_queues; + + /* if Tx handler is separate add 1 for every Tx queue */ + if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS)) + numvecs += adapter->num_tx_queues; + + /* store the number of vectors reserved for queues */ + adapter->num_q_vectors = numvecs; + + /* add 1 vector for link status interrupts */ + numvecs++; + + adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry), + GFP_KERNEL); + + if (!adapter->msix_entries) + return; + + /* populate entry values */ + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + + err = pci_enable_msix_range(adapter->pdev, + adapter->msix_entries, + numvecs, + numvecs); + if (err > 0) + return; + + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + + igc_reset_interrupt_capability(adapter); + +msi_only: + adapter->flags &= ~IGC_FLAG_HAS_MSIX; + + adapter->rss_queues = 1; + adapter->flags |= IGC_FLAG_QUEUE_PAIRS; + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_q_vectors = 1; + if (!pci_enable_msi(adapter->pdev)) + adapter->flags |= IGC_FLAG_HAS_MSI; +} + +/** + * igc_update_ring_itr - update the dynamic ITR value based on packet size + * @q_vector: pointer to q_vector + * + * Stores a new ITR value based on strictly on packet size. This + * algorithm is less sophisticated than that used in igc_update_itr, + * due to the difficulty of synchronizing statistics across multiple + * receive rings. The divisors and thresholds used by this function + * were determined based on theoretical maximum wire speed and testing + * data, in order to minimize response time while increasing bulk + * throughput. + * NOTE: This function is called only when operating in a multiqueue + * receive environment. + */ +static void igc_update_ring_itr(struct igc_q_vector *q_vector) +{ + struct igc_adapter *adapter = q_vector->adapter; + int new_val = q_vector->itr_val; + int avg_wire_size = 0; + unsigned int packets; + + /* For non-gigabit speeds, just fix the interrupt rate at 4000 + * ints/sec - ITR timer value of 120 ticks. + */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + new_val = IGC_4K_ITR; + goto set_itr_val; + default: + break; + } + + packets = q_vector->rx.total_packets; + if (packets) + avg_wire_size = q_vector->rx.total_bytes / packets; + + packets = q_vector->tx.total_packets; + if (packets) + avg_wire_size = max_t(u32, avg_wire_size, + q_vector->tx.total_bytes / packets); + + /* if avg_wire_size isn't set no work was done */ + if (!avg_wire_size) + goto clear_counts; + + /* Add 24 bytes to size to account for CRC, preamble, and gap */ + avg_wire_size += 24; + + /* Don't starve jumbo frames */ + avg_wire_size = min(avg_wire_size, 3000); + + /* Give a little boost to mid-size frames */ + if (avg_wire_size > 300 && avg_wire_size < 1200) + new_val = avg_wire_size / 3; + else + new_val = avg_wire_size / 2; + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (new_val < IGC_20K_ITR && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + new_val = IGC_20K_ITR; + +set_itr_val: + if (new_val != q_vector->itr_val) { + q_vector->itr_val = new_val; + q_vector->set_itr = 1; + } +clear_counts: + q_vector->rx.total_bytes = 0; + q_vector->rx.total_packets = 0; + q_vector->tx.total_bytes = 0; + q_vector->tx.total_packets = 0; +} + +static void igc_ring_irq_enable(struct igc_q_vector *q_vector) +{ + struct igc_adapter *adapter = q_vector->adapter; + struct igc_hw *hw = &adapter->hw; + + if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || + (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { + if (adapter->num_q_vectors == 1) + igc_set_itr(q_vector); + else + igc_update_ring_itr(q_vector); + } + + if (!test_bit(__IGC_DOWN, &adapter->state)) { + if (adapter->msix_entries) + wr32(IGC_EIMS, q_vector->eims_value); + else + igc_irq_enable(adapter); + } +} + +static void igc_add_ring(struct igc_ring *ring, + struct igc_ring_container *head) +{ + head->ring = ring; + head->count++; +} + +/** + * igc_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + */ +static void igc_cache_ring_register(struct igc_adapter *adapter) +{ + int i = 0, j = 0; + + switch (adapter->hw.mac.type) { + case igc_i225: + /* Fall through */ + default: + for (; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->reg_idx = i; + for (; j < adapter->num_tx_queues; j++) + adapter->tx_ring[j]->reg_idx = j; + break; + } +} + +/** + * igc_poll - NAPI Rx polling callback + * @napi: napi polling structure + * @budget: count of how many packets we should handle + */ +static int igc_poll(struct napi_struct *napi, int budget) +{ + struct igc_q_vector *q_vector = container_of(napi, + struct igc_q_vector, + napi); + bool clean_complete = true; + int work_done = 0; + + if (q_vector->tx.ring) + clean_complete = igc_clean_tx_irq(q_vector, budget); + + if (q_vector->rx.ring) { + int cleaned = igc_clean_rx_irq(q_vector, budget); + + work_done += cleaned; + if (cleaned >= budget) + clean_complete = false; + } + + /* If all work not completed, return budget and keep polling */ + if (!clean_complete) + return budget; + + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + igc_ring_irq_enable(q_vector); + + return min(work_done, budget - 1); +} + +/** + * igc_alloc_q_vector - Allocate memory for a single interrupt vector + * @adapter: board private structure to initialize + * @v_count: q_vectors allocated on adapter, used for ring interleaving + * @v_idx: index of vector in adapter struct + * @txr_count: total number of Tx rings to allocate + * @txr_idx: index of first Tx ring to allocate + * @rxr_count: total number of Rx rings to allocate + * @rxr_idx: index of first Rx ring to allocate + * + * We allocate one q_vector. If allocation fails we return -ENOMEM. + */ +static int igc_alloc_q_vector(struct igc_adapter *adapter, + unsigned int v_count, unsigned int v_idx, + unsigned int txr_count, unsigned int txr_idx, + unsigned int rxr_count, unsigned int rxr_idx) +{ + struct igc_q_vector *q_vector; + struct igc_ring *ring; + int ring_count; + + /* igc only supports 1 Tx and/or 1 Rx queue per vector */ + if (txr_count > 1 || rxr_count > 1) + return -ENOMEM; + + ring_count = txr_count + rxr_count; + + /* allocate q_vector and rings */ + q_vector = adapter->q_vector[v_idx]; + if (!q_vector) + q_vector = kzalloc(struct_size(q_vector, ring, ring_count), + GFP_KERNEL); + else + memset(q_vector, 0, struct_size(q_vector, ring, ring_count)); + if (!q_vector) + return -ENOMEM; + + /* initialize NAPI */ + netif_napi_add(adapter->netdev, &q_vector->napi, + igc_poll, 64); + + /* tie q_vector and adapter together */ + adapter->q_vector[v_idx] = q_vector; + q_vector->adapter = adapter; + + /* initialize work limits */ + q_vector->tx.work_limit = adapter->tx_work_limit; + + /* initialize ITR configuration */ + q_vector->itr_register = adapter->io_addr + IGC_EITR(0); + q_vector->itr_val = IGC_START_ITR; + + /* initialize pointer to rings */ + ring = q_vector->ring; + + /* initialize ITR */ + if (rxr_count) { + /* rx or rx/tx vector */ + if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) + q_vector->itr_val = adapter->rx_itr_setting; + } else { + /* tx only vector */ + if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) + q_vector->itr_val = adapter->tx_itr_setting; + } + + if (txr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Tx values */ + igc_add_ring(ring, &q_vector->tx); + + /* apply Tx specific ring traits */ + ring->count = adapter->tx_ring_count; + ring->queue_index = txr_idx; + + /* assign ring to adapter */ + adapter->tx_ring[txr_idx] = ring; + + /* push pointer to next ring */ + ring++; + } + + if (rxr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Rx values */ + igc_add_ring(ring, &q_vector->rx); + + /* apply Rx specific ring traits */ + ring->count = adapter->rx_ring_count; + ring->queue_index = rxr_idx; + + /* assign ring to adapter */ + adapter->rx_ring[rxr_idx] = ring; + } + + return 0; +} + +/** + * igc_alloc_q_vectors - Allocate memory for interrupt vectors + * @adapter: board private structure to initialize + * + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. + */ +static int igc_alloc_q_vectors(struct igc_adapter *adapter) +{ + int rxr_remaining = adapter->num_rx_queues; + int txr_remaining = adapter->num_tx_queues; + int rxr_idx = 0, txr_idx = 0, v_idx = 0; + int q_vectors = adapter->num_q_vectors; + int err; + + if (q_vectors >= (rxr_remaining + txr_remaining)) { + for (; rxr_remaining; v_idx++) { + err = igc_alloc_q_vector(adapter, q_vectors, v_idx, + 0, 0, 1, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining--; + rxr_idx++; + } + } + + for (; v_idx < q_vectors; v_idx++) { + int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); + int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); + + err = igc_alloc_q_vector(adapter, q_vectors, v_idx, + tqpv, txr_idx, rqpv, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining -= rqpv; + txr_remaining -= tqpv; + rxr_idx++; + txr_idx++; + } + + return 0; + +err_out: + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) + igc_free_q_vector(adapter, v_idx); + + return -ENOMEM; +} + +/** + * igc_init_interrupt_scheme - initialize interrupts, allocate queues/vectors + * @adapter: Pointer to adapter structure + * @msix: boolean for MSI-X capability + * + * This function initializes the interrupts and allocates all of the queues. + */ +static int igc_init_interrupt_scheme(struct igc_adapter *adapter, bool msix) +{ + struct pci_dev *pdev = adapter->pdev; + int err = 0; + + igc_set_interrupt_capability(adapter, msix); + + err = igc_alloc_q_vectors(adapter); + if (err) { + dev_err(&pdev->dev, "Unable to allocate memory for vectors\n"); + goto err_alloc_q_vectors; + } + + igc_cache_ring_register(adapter); + + return 0; + +err_alloc_q_vectors: + igc_reset_interrupt_capability(adapter); + return err; +} + +/** + * igc_sw_init - Initialize general software structures (struct igc_adapter) + * @adapter: board private structure to initialize + * + * igc_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int igc_sw_init(struct igc_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct igc_hw *hw = &adapter->hw; + + int size = sizeof(struct igc_mac_addr) * hw->mac.rar_entry_count; + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + /* set default ring sizes */ + adapter->tx_ring_count = IGC_DEFAULT_TXD; + adapter->rx_ring_count = IGC_DEFAULT_RXD; + + /* set default ITR values */ + adapter->rx_itr_setting = IGC_DEFAULT_ITR; + adapter->tx_itr_setting = IGC_DEFAULT_ITR; + + /* set default work limits */ + adapter->tx_work_limit = IGC_DEFAULT_TX_WORK; + + /* adjust max frame to be at least the size of a standard frame */ + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + + VLAN_HLEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + spin_lock_init(&adapter->nfc_lock); + spin_lock_init(&adapter->stats64_lock); + /* Assume MSI-X interrupts, will be checked during IRQ allocation */ + adapter->flags |= IGC_FLAG_HAS_MSIX; + + adapter->mac_table = kzalloc(size, GFP_ATOMIC); + if (!adapter->mac_table) + return -ENOMEM; + + igc_init_queue_configuration(adapter); + + /* This call may decrease the number of queues */ + if (igc_init_interrupt_scheme(adapter, true)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + /* Explicitly disable IRQ since the NIC can be in any state. */ + igc_irq_disable(adapter); + + set_bit(__IGC_DOWN, &adapter->state); + + return 0; +} + /** * igc_up - Open the interface and prepare it to handle traffic * @adapter: board private structure @@ -3018,161 +3755,6 @@ err_out: } /** - * igc_reset_q_vector - Reset config for interrupt vector - * @adapter: board private structure to initialize - * @v_idx: Index of vector to be reset - * - * If NAPI is enabled it will delete any references to the - * NAPI struct. This is preparation for igc_free_q_vector. - */ -static void igc_reset_q_vector(struct igc_adapter *adapter, int v_idx) -{ - struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; - - /* if we're coming from igc_set_interrupt_capability, the vectors are - * not yet allocated - */ - if (!q_vector) - return; - - if (q_vector->tx.ring) - adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; - - if (q_vector->rx.ring) - adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; - - netif_napi_del(&q_vector->napi); -} - -static void igc_reset_interrupt_capability(struct igc_adapter *adapter) -{ - int v_idx = adapter->num_q_vectors; - - if (adapter->msix_entries) { - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; - } else if (adapter->flags & IGC_FLAG_HAS_MSI) { - pci_disable_msi(adapter->pdev); - } - - while (v_idx--) - igc_reset_q_vector(adapter, v_idx); -} - -/** - * igc_set_interrupt_capability - set MSI or MSI-X if supported - * @adapter: Pointer to adapter structure - * @msix: boolean value for MSI-X capability - * - * Attempt to configure interrupts using the best available - * capabilities of the hardware and kernel. - */ -static void igc_set_interrupt_capability(struct igc_adapter *adapter, - bool msix) -{ - int numvecs, i; - int err; - - if (!msix) - goto msi_only; - adapter->flags |= IGC_FLAG_HAS_MSIX; - - /* Number of supported queues. */ - adapter->num_rx_queues = adapter->rss_queues; - - adapter->num_tx_queues = adapter->rss_queues; - - /* start with one vector for every Rx queue */ - numvecs = adapter->num_rx_queues; - - /* if Tx handler is separate add 1 for every Tx queue */ - if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS)) - numvecs += adapter->num_tx_queues; - - /* store the number of vectors reserved for queues */ - adapter->num_q_vectors = numvecs; - - /* add 1 vector for link status interrupts */ - numvecs++; - - adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry), - GFP_KERNEL); - - if (!adapter->msix_entries) - return; - - /* populate entry values */ - for (i = 0; i < numvecs; i++) - adapter->msix_entries[i].entry = i; - - err = pci_enable_msix_range(adapter->pdev, - adapter->msix_entries, - numvecs, - numvecs); - if (err > 0) - return; - - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; - - igc_reset_interrupt_capability(adapter); - -msi_only: - adapter->flags &= ~IGC_FLAG_HAS_MSIX; - - adapter->rss_queues = 1; - adapter->flags |= IGC_FLAG_QUEUE_PAIRS; - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - adapter->num_q_vectors = 1; - if (!pci_enable_msi(adapter->pdev)) - adapter->flags |= IGC_FLAG_HAS_MSI; -} - -/** - * igc_free_q_vector - Free memory allocated for specific interrupt vector - * @adapter: board private structure to initialize - * @v_idx: Index of vector to be freed - * - * This function frees the memory allocated to the q_vector. - */ -static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx) -{ - struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; - - adapter->q_vector[v_idx] = NULL; - - /* igc_get_stats64() might access the rings on this vector, - * we must wait a grace period before freeing it. - */ - if (q_vector) - kfree_rcu(q_vector, rcu); -} - -/** - * igc_free_q_vectors - Free memory allocated for interrupt vectors - * @adapter: board private structure to initialize - * - * This function frees the memory allocated to the q_vectors. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. - */ -static void igc_free_q_vectors(struct igc_adapter *adapter) -{ - int v_idx = adapter->num_q_vectors; - - adapter->num_tx_queues = 0; - adapter->num_rx_queues = 0; - adapter->num_q_vectors = 0; - - while (v_idx--) { - igc_reset_q_vector(adapter, v_idx); - igc_free_q_vector(adapter, v_idx); - } -} - -/** * igc_clear_interrupt_scheme - reset the device to a state of no interrupts * @adapter: Pointer to adapter structure * @@ -3421,149 +4003,6 @@ no_wait: } /** - * igc_update_ring_itr - update the dynamic ITR value based on packet size - * @q_vector: pointer to q_vector - * - * Stores a new ITR value based on strictly on packet size. This - * algorithm is less sophisticated than that used in igc_update_itr, - * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this function - * were determined based on theoretical maximum wire speed and testing - * data, in order to minimize response time while increasing bulk - * throughput. - * NOTE: This function is called only when operating in a multiqueue - * receive environment. - */ -static void igc_update_ring_itr(struct igc_q_vector *q_vector) -{ - struct igc_adapter *adapter = q_vector->adapter; - int new_val = q_vector->itr_val; - int avg_wire_size = 0; - unsigned int packets; - - /* For non-gigabit speeds, just fix the interrupt rate at 4000 - * ints/sec - ITR timer value of 120 ticks. - */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - new_val = IGC_4K_ITR; - goto set_itr_val; - default: - break; - } - - packets = q_vector->rx.total_packets; - if (packets) - avg_wire_size = q_vector->rx.total_bytes / packets; - - packets = q_vector->tx.total_packets; - if (packets) - avg_wire_size = max_t(u32, avg_wire_size, - q_vector->tx.total_bytes / packets); - - /* if avg_wire_size isn't set no work was done */ - if (!avg_wire_size) - goto clear_counts; - - /* Add 24 bytes to size to account for CRC, preamble, and gap */ - avg_wire_size += 24; - - /* Don't starve jumbo frames */ - avg_wire_size = min(avg_wire_size, 3000); - - /* Give a little boost to mid-size frames */ - if (avg_wire_size > 300 && avg_wire_size < 1200) - new_val = avg_wire_size / 3; - else - new_val = avg_wire_size / 2; - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (new_val < IGC_20K_ITR && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - new_val = IGC_20K_ITR; - -set_itr_val: - if (new_val != q_vector->itr_val) { - q_vector->itr_val = new_val; - q_vector->set_itr = 1; - } -clear_counts: - q_vector->rx.total_bytes = 0; - q_vector->rx.total_packets = 0; - q_vector->tx.total_bytes = 0; - q_vector->tx.total_packets = 0; -} - -/** - * igc_update_itr - update the dynamic ITR value based on statistics - * @q_vector: pointer to q_vector - * @ring_container: ring info to update the itr for - * - * Stores a new ITR value based on packets and byte - * counts during the last interrupt. The advantage of per interrupt - * computation is faster updates and more accurate ITR for the current - * traffic pattern. Constants in this function were computed - * based on theoretical maximum wire speed and thresholds were set based - * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * NOTE: These calculations are only valid when operating in a single- - * queue environment. - */ -static void igc_update_itr(struct igc_q_vector *q_vector, - struct igc_ring_container *ring_container) -{ - unsigned int packets = ring_container->total_packets; - unsigned int bytes = ring_container->total_bytes; - u8 itrval = ring_container->itr; - - /* no packets, exit with status unchanged */ - if (packets == 0) - return; - - switch (itrval) { - case lowest_latency: - /* handle TSO and jumbo frames */ - if (bytes / packets > 8000) - itrval = bulk_latency; - else if ((packets < 5) && (bytes > 512)) - itrval = low_latency; - break; - case low_latency: /* 50 usec aka 20000 ints/s */ - if (bytes > 10000) { - /* this if handles the TSO accounting */ - if (bytes / packets > 8000) - itrval = bulk_latency; - else if ((packets < 10) || ((bytes / packets) > 1200)) - itrval = bulk_latency; - else if ((packets > 35)) - itrval = lowest_latency; - } else if (bytes / packets > 2000) { - itrval = bulk_latency; - } else if (packets <= 2 && bytes < 512) { - itrval = lowest_latency; - } - break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ - if (bytes > 25000) { - if (packets > 35) - itrval = low_latency; - } else if (bytes < 1500) { - itrval = low_latency; - } - break; - } - - /* clear work counters since we have the values we need */ - ring_container->total_bytes = 0; - ring_container->total_packets = 0; - - /* write updated itr to ring container */ - ring_container->itr = itrval; -} - -/** * igc_intr_msi - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure @@ -3640,356 +4079,6 @@ static irqreturn_t igc_intr(int irq, void *data) return IRQ_HANDLED; } -static void igc_set_itr(struct igc_q_vector *q_vector) -{ - struct igc_adapter *adapter = q_vector->adapter; - u32 new_itr = q_vector->itr_val; - u8 current_itr = 0; - - /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - current_itr = 0; - new_itr = IGC_4K_ITR; - goto set_itr_now; - default: - break; - } - - igc_update_itr(q_vector, &q_vector->tx); - igc_update_itr(q_vector, &q_vector->rx); - - current_itr = max(q_vector->rx.itr, q_vector->tx.itr); - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (current_itr == lowest_latency && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - current_itr = low_latency; - - switch (current_itr) { - /* counts and packets in update_itr are dependent on these numbers */ - case lowest_latency: - new_itr = IGC_70K_ITR; /* 70,000 ints/sec */ - break; - case low_latency: - new_itr = IGC_20K_ITR; /* 20,000 ints/sec */ - break; - case bulk_latency: - new_itr = IGC_4K_ITR; /* 4,000 ints/sec */ - break; - default: - break; - } - -set_itr_now: - if (new_itr != q_vector->itr_val) { - /* this attempts to bias the interrupt rate towards Bulk - * by adding intermediate steps when interrupt rate is - * increasing - */ - new_itr = new_itr > q_vector->itr_val ? - max((new_itr * q_vector->itr_val) / - (new_itr + (q_vector->itr_val >> 2)), - new_itr) : new_itr; - /* Don't write the value here; it resets the adapter's - * internal timer, and causes us to delay far longer than - * we should between interrupts. Instead, we write the ITR - * value at the beginning of the next interrupt so the timing - * ends up being correct. - */ - q_vector->itr_val = new_itr; - q_vector->set_itr = 1; - } -} - -static void igc_ring_irq_enable(struct igc_q_vector *q_vector) -{ - struct igc_adapter *adapter = q_vector->adapter; - struct igc_hw *hw = &adapter->hw; - - if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || - (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { - if (adapter->num_q_vectors == 1) - igc_set_itr(q_vector); - else - igc_update_ring_itr(q_vector); - } - - if (!test_bit(__IGC_DOWN, &adapter->state)) { - if (adapter->msix_entries) - wr32(IGC_EIMS, q_vector->eims_value); - else - igc_irq_enable(adapter); - } -} - -/** - * igc_poll - NAPI Rx polling callback - * @napi: napi polling structure - * @budget: count of how many packets we should handle - */ -static int igc_poll(struct napi_struct *napi, int budget) -{ - struct igc_q_vector *q_vector = container_of(napi, - struct igc_q_vector, - napi); - bool clean_complete = true; - int work_done = 0; - - if (q_vector->tx.ring) - clean_complete = igc_clean_tx_irq(q_vector, budget); - - if (q_vector->rx.ring) { |