diff options
-rw-r--r-- | drivers/clk/sunxi/clk-factors.c | 101 | ||||
-rw-r--r-- | drivers/clk/sunxi/clk-factors.h | 16 | ||||
-rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 95 |
3 files changed, 113 insertions, 99 deletions
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 2057c8ac648f..f83ba097126c 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -9,18 +9,18 @@ */ #include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/of_address.h> #include <linux/slab.h> -#include <linux/io.h> -#include <linux/err.h> #include <linux/string.h> -#include <linux/delay.h> - #include "clk-factors.h" /* - * DOC: basic adjustable factor-based clock that cannot gate + * DOC: basic adjustable factor-based clock * * Traits of this clock: * prepare - clk_prepare only ensures that parents are prepared @@ -32,6 +32,8 @@ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) +#define FACTORS_MAX_PARENTS 5 + #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) #define CLRMASK(len, pos) (~(SETMASK(len, pos))) #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) @@ -147,9 +149,96 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } -const struct clk_ops clk_factors_ops = { +static const struct clk_ops clk_factors_ops = { .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, }; + +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock) +{ + struct clk *clk; + struct clk_factors *factors; + struct clk_gate *gate = NULL; + struct clk_mux *mux = NULL; + struct clk_hw *gate_hw = NULL; + struct clk_hw *mux_hw = NULL; + const char *clk_name = node->name; + const char *parents[FACTORS_MAX_PARENTS]; + void __iomem *reg; + int i = 0; + + reg = of_iomap(node, 0); + + /* if we have a mux, we will have >1 parents */ + while (i < FACTORS_MAX_PARENTS && + (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + /* + * some factor clocks, such as pll5 and pll6, may have multiple + * outputs, and have their name designated in factors_data + */ + if (data->name) + clk_name = data->name; + else + of_property_read_string(node, "clock-output-names", &clk_name); + + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) + return NULL; + + /* set up factors properties */ + factors->reg = reg; + factors->config = data->table; + factors->get_factors = data->getter; + factors->lock = lock; + + /* Add a gate if this factor clock can be gated */ + if (data->enable) { + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) { + kfree(factors); + return NULL; + } + + /* set up gate properties */ + gate->reg = reg; + gate->bit_idx = data->enable; + gate->lock = factors->lock; + gate_hw = &gate->hw; + } + + /* Add a mux if this factor clock can be muxed */ + if (data->mux) { + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) { + kfree(factors); + kfree(gate); + return NULL; + } + + /* set up gate properties */ + mux->reg = reg; + mux->shift = data->mux; + mux->mask = SUNXI_FACTORS_MUX_MASK; + mux->lock = factors->lock; + mux_hw = &mux->hw; + } + + clk = clk_register_composite(NULL, clk_name, + parents, i, + mux_hw, &clk_mux_ops, + &factors->hw, &clk_factors_ops, + gate_hw, &clk_gate_ops, 0); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index d2d0efa39379..9913840018d3 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -3,9 +3,12 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #define SUNXI_FACTORS_NOT_APPLICABLE (0) +#define SUNXI_FACTORS_MUX_MASK 0x3 + struct clk_factors_config { u8 nshift; u8 nwidth; @@ -18,6 +21,14 @@ struct clk_factors_config { u8 n_start; }; +struct factors_data { + int enable; + int mux; + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); + const char *name; +}; + struct clk_factors { struct clk_hw hw; void __iomem *reg; @@ -26,5 +37,8 @@ struct clk_factors { spinlock_t *lock; }; -extern const struct clk_ops clk_factors_ops; +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock); + #endif diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 2cf6581329a6..393df321010b 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/reset-controller.h> +#include <linux/spinlock.h> #include "clk-factors.h" @@ -440,16 +441,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); * sunxi_factors_clk_setup() - Setup function for factor clocks */ -#define SUNXI_FACTORS_MUX_MASK 0x3 - -struct factors_data { - int enable; - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - const char *name; -}; - static struct clk_factors_config sun4i_pll1_config = { .nshift = 8, .nwidth = 5, @@ -583,89 +574,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = { }; static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) + const struct factors_data *data) { - struct clk *clk; - struct clk_factors *factors; - struct clk_gate *gate = NULL; - struct clk_mux *mux = NULL; - struct clk_hw *gate_hw = NULL; - struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; - const char *parents[SUNXI_MAX_PARENTS]; - void __iomem *reg; - int i = 0; - - reg = of_iomap(node, 0); - - /* if we have a mux, we will have >1 parents */ - while (i < SUNXI_MAX_PARENTS && - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - /* - * some factor clocks, such as pll5 and pll6, may have multiple - * outputs, and have their name designated in factors_data - */ - if (data->name) - clk_name = data->name; - else - of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); - return NULL; - } - - /* set up gate properties */ - gate->reg = reg; - gate->bit_idx = data->enable; - gate->lock = &clk_lock; - gate_hw = &gate->hw; - } - - /* Add a mux if this factor clock can be muxed */ - if (data->mux) { - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { - kfree(factors); - kfree(gate); - return NULL; - } - - /* set up gate properties */ - mux->reg = reg; - mux->shift = data->mux; - mux->mask = SUNXI_FACTORS_MUX_MASK; - mux->lock = &clk_lock; - mux_hw = &mux->hw; - } - - /* set up factors properties */ - factors->reg = reg; - factors->config = data->table; - factors->get_factors = data->getter; - factors->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, - gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } - - return clk; + return sunxi_factors_register(node, data, &clk_lock); } |