diff options
68 files changed, 729 insertions, 162 deletions
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 57d3ee9e4bde..fc3ae951bc07 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3403,6 +3403,52 @@ invalid, if invalid pages are written to (e.g. after the end of memory) or if no page table is present for the addresses (e.g. when using hugepages). +4.108 KVM_PPC_GET_CPU_CHAR + +Capability: KVM_CAP_PPC_GET_CPU_CHAR +Architectures: powerpc +Type: vm ioctl +Parameters: struct kvm_ppc_cpu_char (out) +Returns: 0 on successful completion + -EFAULT if struct kvm_ppc_cpu_char cannot be written + +This ioctl gives userspace information about certain characteristics +of the CPU relating to speculative execution of instructions and +possible information leakage resulting from speculative execution (see +CVE-2017-5715, CVE-2017-5753 and CVE-2017-5754). The information is +returned in struct kvm_ppc_cpu_char, which looks like this: + +struct kvm_ppc_cpu_char { + __u64 character; /* characteristics of the CPU */ + __u64 behaviour; /* recommended software behaviour */ + __u64 character_mask; /* valid bits in character */ + __u64 behaviour_mask; /* valid bits in behaviour */ +}; + +For extensibility, the character_mask and behaviour_mask fields +indicate which bits of character and behaviour have been filled in by +the kernel. If the set of defined bits is extended in future then +userspace will be able to tell whether it is running on a kernel that +knows about the new bits. + +The character field describes attributes of the CPU which can help +with preventing inadvertent information disclosure - specifically, +whether there is an instruction to flash-invalidate the L1 data cache +(ori 30,30,0 or mtspr SPRN_TRIG2,rN), whether the L1 data cache is set +to a mode where entries can only be used by the thread that created +them, whether the bcctr[l] instruction prevents speculation, and +whether a speculation barrier instruction (ori 31,31,0) is provided. + +The behaviour field describes actions that software should take to +prevent inadvertent information disclosure, and thus describes which +vulnerabilities the hardware is subject to; specifically whether the +L1 data cache should be flushed when returning to user mode from the +kernel, and whether a speculation barrier should be placed between an +array bounds check and the array access. + +These fields use the same bit definitions as the new +H_GET_CPU_CHARACTERISTICS hypercall. + 5. The kvm_run structure ------------------------ diff --git a/Documentation/x86/pti.txt b/Documentation/x86/pti.txt index d11eff61fc9a..5cd58439ad2d 100644 --- a/Documentation/x86/pti.txt +++ b/Documentation/x86/pti.txt @@ -78,7 +78,7 @@ this protection comes at a cost: non-PTI SYSCALL entry code, so requires mapping fewer things into the userspace page tables. The downside is that stacks must be switched at entry time. - d. Global pages are disabled for all kernel structures not + c. Global pages are disabled for all kernel structures not mapped into both kernel and userspace page tables. This feature of the MMU allows different processes to share TLB entries mapping the kernel. Losing the feature means more diff --git a/MAINTAINERS b/MAINTAINERS index 079af8b7ae8e..7ec1b088c07f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9102,6 +9102,7 @@ F: drivers/usb/image/microtek.* MIPS M: Ralf Baechle <ralf@linux-mips.org> +M: James Hogan <jhogan@kernel.org> L: linux-mips@linux-mips.org W: http://www.linux-mips.org/ T: git git://git.linux-mips.org/pub/scm/ralf/linux.git @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 15 SUBLEVEL = 0 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Fearless Coyote # *DOCUMENTATION* diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c index 37bd6d9b8eb9..a6bdc1da47ad 100644 --- a/arch/alpha/kernel/sys_sio.c +++ b/arch/alpha/kernel/sys_sio.c @@ -102,6 +102,15 @@ sio_pci_route(void) alpha_mv.sys.sio.route_tab); } +static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev) +{ + if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) && + (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA)) + return false; + + return true; +} + static unsigned int __init sio_collect_irq_levels(void) { @@ -110,8 +119,7 @@ sio_collect_irq_levels(void) /* Iterate through the devices, collecting IRQ levels. */ for_each_pci_dev(dev) { - if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) && - (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA)) + if (!sio_pci_dev_irq_needs_level(dev)) continue; if (dev->irq) @@ -120,8 +128,7 @@ sio_collect_irq_levels(void) return level_bits; } -static void __init -sio_fixup_irq_levels(unsigned int level_bits) +static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset) { unsigned int old_level_bits; @@ -139,12 +146,21 @@ sio_fixup_irq_levels(unsigned int level_bits) */ old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8); - level_bits |= (old_level_bits & 0x71ff); + if (reset) + old_level_bits &= 0x71ff; + + level_bits |= old_level_bits; outb((level_bits >> 0) & 0xff, 0x4d0); outb((level_bits >> 8) & 0xff, 0x4d1); } +static inline void +sio_fixup_irq_levels(unsigned int level_bits) +{ + __sio_fixup_irq_levels(level_bits, true); +} + static inline int noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -181,7 +197,14 @@ noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5; int irq = COMMON_TABLE_LOOKUP, tmp; tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); - return irq >= 0 ? tmp : -1; + + irq = irq >= 0 ? tmp : -1; + + /* Fixup IRQ level if an actual IRQ mapping is detected */ + if (sio_pci_dev_irq_needs_level(dev) && irq >= 0) + __sio_fixup_irq_levels(1 << irq, false); + + return irq; } static inline int diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S index 316a99aa9efe..1cfcfbbea6f0 100644 --- a/arch/alpha/lib/ev6-memset.S +++ b/arch/alpha/lib/ev6-memset.S @@ -18,7 +18,7 @@ * The algorithm for the leading and trailing quadwords remains the same, * however the loop has been unrolled to enable better memory throughput, * and the code has been replicated for each of the entry points: __memset - * and __memsetw to permit better scheduling to eliminate the stalling + * and __memset16 to permit better scheduling to eliminate the stalling * encountered during the mask replication. * A future enhancement might be to put in a byte store loop for really * small (say < 32 bytes) memset()s. Whether or not that change would be @@ -34,7 +34,7 @@ .globl memset .globl __memset .globl ___memset - .globl __memsetw + .globl __memset16 .globl __constant_c_memset .ent ___memset @@ -415,9 +415,9 @@ end: * to mask stalls. Note that entry point names also had to change */ .align 5 - .ent __memsetw + .ent __memset16 -__memsetw: +__memset16: .frame $30,0,$26,0 .prologue 0 @@ -596,8 +596,8 @@ end_w: nop ret $31,($26),1 # L0 : - .end __memsetw - EXPORT_SYMBOL(__memsetw) + .end __memset16 + EXPORT_SYMBOL(__memset16) memset = ___memset __memset = ___memset diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 304203fa9e33..e60494f1eef9 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -45,7 +45,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) ret = kvm_psci_call(vcpu); if (ret < 0) { - kvm_inject_undefined(vcpu); + vcpu_set_reg(vcpu, 0, ~0UL); return 1; } @@ -54,7 +54,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) { - kvm_inject_undefined(vcpu); + vcpu_set_reg(vcpu, 0, ~0UL); return 1; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 350a990fc719..8e0b3702f1c0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -259,6 +259,7 @@ config BCM47XX select LEDS_GPIO_REGISTER select BCM47XX_NVRAM select BCM47XX_SPROM + select BCM47XX_SSB if !BCM47XX_BCMA help Support for BCM47XX based boards @@ -389,6 +390,7 @@ config LANTIQ select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_MIPS16 select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_VPE_LOADER select SYS_HAS_EARLY_PRINTK select GPIOLIB select SWAP_IO_SPACE @@ -516,6 +518,7 @@ config MIPS_MALTA select SYS_SUPPORTS_MIPS16 select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS + select SYS_SUPPORTS_VPE_LOADER select SYS_SUPPORTS_ZBOOT select SYS_SUPPORTS_RELOCATABLE select USE_OF @@ -2281,9 +2284,16 @@ config MIPSR2_TO_R6_EMULATOR The only reason this is a build-time option is to save ~14K from the final kernel image. +config SYS_SUPPORTS_VPE_LOADER + bool + depends on SYS_SUPPORTS_MULTITHREADING + help + Indicates that the platform supports the VPE loader, and provides + physical_memsize. + config MIPS_VPE_LOADER bool "VPE loader support." - depends on SYS_SUPPORTS_MULTITHREADING && MODULES + depends on SYS_SUPPORTS_VPE_LOADER && MODULES select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 464af5e025d6..0749c3724543 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -124,30 +124,36 @@ config SCACHE_DEBUGFS If unsure, say N. -menuconfig MIPS_CPS_NS16550 +menuconfig MIPS_CPS_NS16550_BOOL bool "CPS SMP NS16550 UART output" depends on MIPS_CPS help Output debug information via an ns16550 compatible UART if exceptions occur early in the boot process of a secondary core. -if MIPS_CPS_NS16550 +if MIPS_CPS_NS16550_BOOL + +config MIPS_CPS_NS16550 + def_bool MIPS_CPS_NS16550_BASE != 0 config MIPS_CPS_NS16550_BASE hex "UART Base Address" default 0x1b0003f8 if MIPS_MALTA + default 0 help The base address of the ns16550 compatible UART on which to output debug information from the early stages of core startup. + This is only used if non-zero. + config MIPS_CPS_NS16550_SHIFT int "UART Register Shift" - default 0 if MIPS_MALTA + default 0 help The number of bits to shift ns16550 register indices by in order to form their addresses. That is, log base 2 of the span between adjacent ns16550 registers in the system. -endif # MIPS_CPS_NS16550 +endif # MIPS_CPS_NS16550_BOOL endmenu diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 4674f1efbe7a..e1675c25d5d4 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -575,7 +575,7 @@ static int __init ar7_register_uarts(void) uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; uart_port.iotype = UPIO_MEM32; - uart_port.flags = UPF_FIXED_TYPE; + uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF; uart_port.regshift = 2; uart_port.line = 0; diff --git a/arch/mips/ath25/devices.c b/arch/mips/ath25/devices.c index e1156347da53..301a9028273c 100644 --- a/arch/mips/ath25/devices.c +++ b/arch/mips/ath25/devices.c @@ -73,6 +73,7 @@ const char *get_system_type(void) void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) { +#ifdef CONFIG_SERIAL_8250_CONSOLE struct uart_port s; memset(&s, 0, sizeof(s)); @@ -85,6 +86,7 @@ void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) s.uartclk = uartclk; early_serial_setup(&s); +#endif /* CONFIG_SERIAL_8250_CONSOLE */ } int __init ath25_add_wmac(int nr, u32 base, int irq) diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index dd5567b1e305..8f5bd04f320a 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -292,7 +292,6 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core, *this_cpu_ptr(&cm_core_lock_flags)); } else { WARN_ON(cluster != 0); - WARN_ON(vp != 0); WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL); /* diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 78c2affeabf8..e84e12655fa8 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -16,4 +16,5 @@ obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o # libgcc-style stuff needed in the kernel -obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o ucmpdi2.o +obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o multi3.o \ + ucmpdi2.o diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h index 28002ed90c2c..199a7f96282f 100644 --- a/arch/mips/lib/libgcc.h +++ b/arch/mips/lib/libgcc.h @@ -10,10 +10,18 @@ typedef int word_type __attribute__ ((mode (__word__))); struct DWstruct { int high, low; }; + +struct TWstruct { + long long high, low; +}; #elif defined(__LITTLE_ENDIAN) struct DWstruct { int low, high; }; + +struct TWstruct { + long long low, high; +}; #else #error I feel sick. #endif @@ -23,4 +31,13 @@ typedef union { long long ll; } DWunion; +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6) +typedef int ti_type __attribute__((mode(TI))); + +typedef union { + struct TWstruct s; + ti_type ti; +} TWunion; +#endif + #endif /* __ASM_LIBGCC_H */ diff --git a/arch/mips/lib/multi3.c b/arch/mips/lib/multi3.c new file mode 100644 index 000000000000..111ad475aa0c --- /dev/null +++ b/arch/mips/lib/multi3.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/export.h> + +#include "libgcc.h" + +/* + * GCC 7 suboptimally generates __multi3 calls for mips64r6, so for that + * specific case only we'll implement it here. + * + * See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82981 + */ +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6) && (__GNUC__ == 7) + +/* multiply 64-bit values, low 64-bits returned */ +static inline long long notrace dmulu(long long a, long long b) +{ + long long res; + + asm ("dmulu %0,%1,%2" : "=r" (res) : "r" (a), "r" (b)); + return res; +} + +/* multiply 64-bit unsigned values, high 64-bits of 128-bit result returned */ +static inline long long notrace dmuhu(long long a, long long b) +{ + long long res; + + asm ("dmuhu %0,%1,%2" : "=r" (res) : "r" (a), "r" (b)); + return res; +} + +/* multiply 128-bit values, low 128-bits returned */ +ti_type notrace __multi3(ti_type a, ti_type b) +{ + TWunion res, aa, bb; + + aa.ti = a; + bb.ti = b; + + /* + * a * b = (a.lo * b.lo) + * + 2^64 * (a.hi * b.lo + a.lo * b.hi) + * [+ 2^128 * (a.hi * b.hi)] + */ + res.s.low = dmulu(aa.s.low, bb.s.low); + res.s.high = dmuhu(aa.s.low, bb.s.low); + res.s.high += dmulu(aa.s.high, bb.s.low); + res.s.high += dmulu(aa.s.low, bb.s.high); + + return res.ti; +} +EXPORT_SYMBOL(__multi3); + +#endif /* 64BIT && CPU_MIPSR6 && GCC7 */ diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c index cdb5a191b9d5..9bb6baa45da3 100644 --- a/arch/mips/mm/uasm-micromips.c +++ b/arch/mips/mm/uasm-micromips.c @@ -40,7 +40,7 @@ #include "uasm.c" -static const struct insn const insn_table_MM[insn_invalid] = { +static const struct insn insn_table_MM[insn_invalid] = { [insn_addu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_addu32_op), RT | RS | RD}, [insn_addiu] = {M(mm_addiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM}, [insn_and] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_and_op), RT | RS | RD}, diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c index d4469b20d176..4f46a4509f79 100644 --- a/arch/mips/ralink/timer.c +++ b/arch/mips/ralink/timer.c @@ -109,9 +109,9 @@ static int rt_timer_probe(struct platform_device *pdev) } rt->irq = platform_get_irq(pdev, 0); - if (!rt->irq) { + if (rt->irq < 0) { dev_err(&pdev->dev, "failed to load irq\n"); - return -ENOENT; + return rt->irq; } rt->membase = devm_ioremap_resource(&pdev->dev, res); diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile index efdecdb6e3ea..8186afca2234 100644 --- a/arch/mips/rb532/Makefile +++ b/arch/mips/rb532/Makefile @@ -2,4 +2,6 @@ # Makefile for the RB532 board specific parts of the kernel # -obj-y += irq.o time.o setup.o serial.o prom.o gpio.o devices.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += serial.o + +obj-y += irq.o time.o setup.o prom.o gpio.o devices.o diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 32ea3e6731d6..354d258396ff 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -310,6 +310,8 @@ static int __init plat_setup_devices(void) return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } +#ifdef CONFIG_NET + static int __init setup_kmac(char *s) { printk(KERN_INFO "korina mac = %s\n", s); @@ -322,4 +324,6 @@ static int __init setup_kmac(char *s) __setup("kmac=", setup_kmac); +#endif /* CONFIG_NET */ + arch_initcall(plat_setup_devices); diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h index 61d6049f4c1e..637b7263cb86 100644 --- a/arch/powerpc/include/uapi/asm/kvm.h +++ b/arch/powerpc/include/uapi/asm/kvm.h @@ -443,6 +443,31 @@ struct kvm_ppc_rmmu_info { __u32 ap_encodings[8]; }; +/* For KVM_PPC_GET_CPU_CHAR */ +struct kvm_ppc_cpu_char { + __u64 character; /* characteristics of the CPU */ + __u64 behaviour; /* recommended software behaviour */ + __u64 character_mask; /* valid bits in character */ + __u64 behaviour_mask; /* valid bits in behaviour */ +}; + +/* + * Values for character and character_mask. + * These are identical to the values used by H_GET_CPU_CHARACTERISTICS. + */ +#define KVM_PPC_CPU_CHAR_SPEC_BAR_ORI31 (1ULL << 63) +#define KVM_PPC_CPU_CHAR_BCCTRL_SERIALISED (1ULL << 62) +#define KVM_PPC_CPU_CHAR_L1D_FLUSH_ORI30 (1ULL << 61) +#define KVM_PPC_CPU_CHAR_L1D_FLUSH_TRIG2 (1ULL << 60) +#define KVM_PPC_CPU_CHAR_L1D_THREAD_PRIV (1ULL << 59) +#define KVM_PPC_CPU_CHAR_BR_HINT_HONOURED (1ULL << 58) +#define KVM_PPC_CPU_CHAR_MTTRIG_THR_RECONF (1ULL << |