diff options
76 files changed, 1918 insertions, 743 deletions
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 1d26eeb6b5f6..6b20128fab8a 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -277,14 +277,26 @@ and <size> parameters are provided to do partial page mapping, it is recommended that you never use these unless you really know what the cache width is. +dma_addr_t +dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size, + enum dma_data_direction dir, unsigned long attrs) + +void +dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size, + enum dma_data_direction dir, unsigned long attrs) + +API for mapping and unmapping for MMIO resources. All the notes and +warnings for the other mapping APIs apply here. The API should only be +used to map device MMIO resources, mapping of RAM is not permitted. + int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -In some circumstances dma_map_single() and dma_map_page() will fail to create -a mapping. A driver can check for these errors by testing the returned -DMA address with dma_mapping_error(). A non-zero return value means the mapping -could not be created and the driver should take appropriate action (e.g. -reduce current DMA mapping usage or delay and try again later). +In some circumstances dma_map_single(), dma_map_page() and dma_map_resource() +will fail to create a mapping. A driver can check for these errors by testing +the returned DMA address with dma_mapping_error(). A non-zero return value +means the mapping could not be created and the driver should take appropriate +action (e.g. reduce current DMA mapping usage or delay and try again later). int dma_map_sg(struct device *dev, struct scatterlist *sg, diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 175f0e44ed85..3c9a57a8443b 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -8,6 +8,7 @@ Required properties: "fsl,imx51-sdma" "fsl,imx53-sdma" "fsl,imx6q-sdma" + "fsl,imx7d-sdma" The -to variants should be preferred since they allow to determine the correct ROM script addresses needed for the driver to work without additional firmware. diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 5b902ac8d97e..5f2ce669789a 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -1,4 +1,4 @@ -* Renesas R-Car DMA Controller Device Tree bindings +* Renesas R-Car (RZ/G) DMA Controller Device Tree bindings Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA controller instances named DMAC capable of serving multiple clients. Channels @@ -16,6 +16,8 @@ Required Properties: - compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback. Examples with soctypes are: + - "renesas,dmac-r8a7743" (RZ/G1M) + - "renesas,dmac-r8a7745" (RZ/G1E) - "renesas,dmac-r8a7790" (R-Car H2) - "renesas,dmac-r8a7791" (R-Car M2-W) - "renesas,dmac-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index d13c136cef8c..6b267045f522 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -7,6 +7,7 @@ Required properties: - compatible: Must be one of "allwinner,sun6i-a31-dma" "allwinner,sun8i-a23-dma" + "allwinner,sun8i-a83t-dma" "allwinner,sun8i-h3-dma" - reg: Should contain the registers base address and length - interrupts: Should contain a reference to the interrupt used by this device diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt index 91ce82d5f0c4..c4fd47540b31 100644 --- a/Documentation/dmaengine/provider.txt +++ b/Documentation/dmaengine/provider.txt @@ -282,6 +282,17 @@ supported. that is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending to be called. + - In this structure the function pointer callback_result can be + initialized in order for the submitter to be notified that a + transaction has completed. In the earlier code the function pointer + callback has been used. However it does not provide any status to the + transaction and will be deprecated. The result structure defined as + dmaengine_result that is passed in to callback_result has two fields: + + result: This provides the transfer result defined by + dmaengine_tx_result. Either success or some error + condition. + + residue: Provides the residue bytes of the transfer for those that + support residue. * device_issue_pending - Takes the first transaction descriptor in the pending queue, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index bf50328107bd..ba0ceebdd73d 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_data/dma-s3c24xx.h> +#include <linux/dmaengine.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -439,10 +440,44 @@ static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, }; +static const struct dma_slave_map s3c2440_dma_slave_map[] = { + /* TODO: DMACH_XD0 */ + /* TODO: DMACH_XD1 */ + { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 }, + { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 }, + { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 }, + { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, + { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, + /* TODO: DMACH_TIMER */ + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, + { "samsung-ac97", "rx", (void *)DMACH_PCM_IN }, + { "samsung-ac97", "tx", (void *)DMACH_PCM_OUT }, + { "samsung-ac97", "rx", (void *)DMACH_MIC_IN }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { .num_phy_channels = 4, .channels = s3c2440_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2440_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map), }; struct platform_device s3c2440_device_dma = { diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index a2302aba5df2..ab4f74536057 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -2014,6 +2014,63 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, __free_iova(mapping, iova, len); } +/** + * arm_iommu_map_resource - map a device resource for DMA + * @dev: valid struct device pointer + * @phys_addr: physical address of resource + * @size: size of resource to map + * @dir: DMA transfer direction + */ +static dma_addr_t arm_iommu_map_resource(struct device *dev, + phys_addr_t phys_addr, size_t size, + enum dma_data_direction dir, unsigned long attrs) +{ + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + dma_addr_t dma_addr; + int ret, prot; + phys_addr_t addr = phys_addr & PAGE_MASK; + unsigned int offset = phys_addr & ~PAGE_MASK; + size_t len = PAGE_ALIGN(size + offset); + + dma_addr = __alloc_iova(mapping, len); + if (dma_addr == DMA_ERROR_CODE) + return dma_addr; + + prot = __dma_direction_to_prot(dir) | IOMMU_MMIO; + + ret = iommu_map(mapping->domain, dma_addr, addr, len, prot); + if (ret < 0) + goto fail; + + return dma_addr + offset; +fail: + __free_iova(mapping, dma_addr, len); + return DMA_ERROR_CODE; +} + +/** + * arm_iommu_unmap_resource - unmap a device DMA resource + * @dev: valid struct device pointer + * @dma_handle: DMA address to resource + * @size: size of resource to map + * @dir: DMA transfer direction + */ +static void arm_iommu_unmap_resource(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction dir, + unsigned long attrs) +{ + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + dma_addr_t iova = dma_handle & PAGE_MASK; + unsigned int offset = dma_handle & ~PAGE_MASK; + size_t len = PAGE_ALIGN(size + offset); + + if (!iova) + return; + + iommu_unmap(mapping->domain, iova, len); + __free_iova(mapping, iova, len); +} + static void arm_iommu_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { @@ -2057,6 +2114,9 @@ struct dma_map_ops iommu_ops = { .unmap_sg = arm_iommu_unmap_sg, .sync_sg_for_cpu = arm_iommu_sync_sg_for_cpu, .sync_sg_for_device = arm_iommu_sync_sg_for_device, + + .map_resource = arm_iommu_map_resource, + .unmap_resource = arm_iommu_unmap_resource, }; struct dma_map_ops iommu_coherent_ops = { @@ -2070,6 +2130,9 @@ struct dma_map_ops iommu_coherent_ops = { .map_sg = arm_coherent_iommu_map_sg, .unmap_sg = arm_coherent_iommu_unmap_sg, + + .map_resource = arm_iommu_map_resource, + .unmap_resource = arm_iommu_unmap_resource, }; /** diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 08b3ac68952b..f83de99d7d71 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -368,8 +368,6 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, dma_set_unmap(tx, unmap); async_tx_submit(chan, tx, submit); - - return tx; } else { struct page *p_src = P(blocks, disks); struct page *q_src = Q(blocks, disks); @@ -424,9 +422,11 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, submit->cb_param = cb_param_orig; submit->flags = flags_orig; async_tx_sync_epilog(submit); - - return NULL; + tx = NULL; } + dmaengine_unmap_put(unmap); + + return tx; } EXPORT_SYMBOL_GPL(async_syndrome_val); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 739f797b40d9..af63a6bcf564 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -102,7 +102,7 @@ config AXI_DMAC config COH901318 bool "ST-Ericsson COH901318 DMA support" select DMA_ENGINE - depends on ARCH_U300 + depends on ARCH_U300 || COMPILE_TEST help Enable support for ST-Ericsson COH 901 318 DMA. @@ -114,13 +114,13 @@ config DMA_BCM2835 config DMA_JZ4740 tristate "JZ4740 DMA support" - depends on MACH_JZ4740 + depends on MACH_JZ4740 || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS config DMA_JZ4780 tristate "JZ4780 DMA support" - depends on MACH_JZ4780 + depends on MACH_JZ4780 || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -130,14 +130,14 @@ config DMA_JZ4780 config DMA_OMAP tristate "OMAP DMA support" - depends on ARCH_OMAP + depends on ARCH_OMAP || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS - select TI_DMA_CROSSBAR if SOC_DRA7XX + select TI_DMA_CROSSBAR if (SOC_DRA7XX || COMPILE_TEST) config DMA_SA11X0 tristate "SA-11x0 DMA support" - depends on ARCH_SA1100 + depends on ARCH_SA1100 || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -150,7 +150,6 @@ config DMA_SUN4I depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) select DMA_ENGINE - select DMA_OF select DMA_VIRTUAL_CHANNELS help Enable support for the DMA controller present in the sun4i, @@ -167,7 +166,7 @@ config DMA_SUN6I config EP93XX_DMA bool "Cirrus Logic EP93xx DMA support" - depends on ARCH_EP93XX + depends on ARCH_EP93XX || COMPILE_TEST select DMA_ENGINE help Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. @@ -279,7 +278,7 @@ config INTEL_MIC_X100_DMA config K3_DMA tristate "Hisilicon K3 DMA support" - depends on ARCH_HI3xxx + depends on ARCH_HI3xxx || ARCH_HISI || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -297,16 +296,16 @@ config LPC18XX_DMAMUX config MMP_PDMA bool "MMP PDMA support" - depends on (ARCH_MMP || ARCH_PXA) + depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST select DMA_ENGINE help Support the MMP PDMA engine for PXA and MMP platform. config MMP_TDMA bool "MMP Two-Channel DMA support" - depends on ARCH_MMP + depends on ARCH_MMP || COMPILE_TEST select DMA_ENGINE - select MMP_SRAM + select MMP_SRAM if ARCH_MMP help Support the MMP Two-Channel DMA engine. This engine used for MMP Audio DMA and pxa910 SQU. @@ -316,7 +315,6 @@ config MOXART_DMA tristate "MOXART DMA support" depends on ARCH_MOXART select DMA_ENGINE - select DMA_OF select DMA_VIRTUAL_CHANNELS help Enable support for the MOXA ART SoC DMA controller. @@ -439,9 +437,8 @@ config STE_DMA40 config STM32_DMA bool "STMicroelectronics STM32 DMA support" - depends on ARCH_STM32 + depends on ARCH_STM32 || COMPILE_TEST select DMA_ENGINE - select DMA_OF select DMA_VIRTUAL_CHANNELS help Enable support for the on-chip DMA controller on STMicroelectronics @@ -451,7 +448,7 @@ config STM32_DMA config S3C24XX_DMAC bool "Samsung S3C24XX DMA support" - depends on ARCH_S3C24XX + depends on ARCH_S3C24XX || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -483,10 +480,9 @@ config TEGRA20_APB_DMA config TEGRA210_ADMA bool "NVIDIA Tegra210 ADMA support" - depends on ARCH_TEGRA_210_SOC + depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST) && PM_CLK select DMA_ENGINE select DMA_VIRTUAL_CHANNELS - select PM_CLK help Support for the NVIDIA Tegra210 ADMA controller driver. The DMA controller has multiple DMA channels and is used to service @@ -497,7 +493,7 @@ config TEGRA210_ADMA config TIMB_DMA tristate "Timberdale FPGA DMA support" - depends on MFD_TIMBERDALE + depends on MFD_TIMBERDALE || COMPILE_TEST select DMA_ENGINE help Enable support for the Timberdale FPGA DMA engine. @@ -515,10 +511,10 @@ config TI_DMA_CROSSBAR config TI_EDMA bool "TI EDMA support" - depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE + depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS - select TI_DMA_CROSSBAR if ARCH_OMAP + select TI_DMA_CROSSBAR if (ARCH_OMAP || COMPILE_TEST) default n help Enable support for the TI EDMA controller. This DMA @@ -561,7 +557,7 @@ config XILINX_ZYNQMP_DMA config ZX_DMA tristate "ZTE ZX296702 DMA support" - depends on ARCH_ZX + depends on ARCH_ZX || COMPILE_TEST select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 53d22eb73b56..a4c8f80db29d 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -473,15 +473,11 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* for cyclic transfers, * no need to replay callback function while stopping */ if (!atc_chan_is_cyclic(atchan)) { - dma_async_tx_callback callback = txd->callback; - void *param = txd->callback_param; - /* * The API requires that no submissions are done from a * callback, so we don't need to drop the lock here */ - if (callback) - callback(param); + dmaengine_desc_get_callback_invoke(txd, NULL); } dma_run_dependencies(txd); @@ -598,15 +594,12 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan) { struct at_desc *first = atc_first_active(atchan); struct dma_async_tx_descriptor *txd = &first->txd; - dma_async_tx_callback callback = txd->callback; - void *param = txd->callback_param; dev_vdbg(chan2dev(&atchan->chan_common), "new cyclic period llp 0x%08x\n", channel_readl(atchan, DSCR)); - if (callback) - callback(param); + dmaengine_desc_get_callback_invoke(txd, NULL); } /*-- IRQ & Tasklet ---------------------------------------------------*/ diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index 832cbd647145..b7d7f2d443a1 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1572,8 +1572,8 @@ static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan) desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node); txd = &desc->tx_dma_desc; - if (txd->callback && (txd->flags & DMA_PREP_INTERRUPT)) - txd->callback(txd->callback_param); + if (txd->flags & DMA_PREP_INTERRUPT) + dmaengine_desc_get_callback_invoke(txd, NULL); } static void at_xdmac_tasklet(unsigned long data) @@ -1616,8 +1616,8 @@ static void at_xdmac_tasklet(unsigned long data) if (!at_xdmac_chan_is_cyclic(atchan)) { dma_cookie_complete(txd); - |