diff options
24 files changed, 729 insertions, 456 deletions
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 41811223e5be..a474359dd206 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -60,8 +60,8 @@ DCDC2 : DC-DC buck : vin2-supply DCDC3 : DC-DC buck : vin3-supply DCDC4 : DC-DC buck : vin4-supply DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : dcdc1-supply : DCDC1 secondary output -DC5LDO : LDO : dcdc5-supply : input from DCDC5 +DC1SW : On/Off Switch : : DCDC1 secondary output +DC5LDO : LDO : : input from DCDC5 ALDO1 : LDO : aldoin-supply : shared supply ALDO2 : LDO : aldoin-supply : shared supply ALDO3 : LDO : aldoin-supply : shared supply diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index e91485d11241..6067d9830d07 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -8,6 +8,8 @@ Required properties: Optional properties: - system-power-controller: Telling whether or not this pmic is controlling the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +- active-semi,vsel-high: Indicates the VSEL pin is high. + If this property is missing, assume the VSEL pin is low(0). Optional input supply properties: - for act8600: @@ -49,6 +51,7 @@ Example: pmic: act8865@5b { compatible = "active-semi,act8865"; reg = <0x5b>; + active-semi,vsel-high; status = "disabled"; regulators { diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt index 758eae24082a..37c4ea076f88 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -13,6 +13,7 @@ Optional properties: - anatop-delay-reg-offset: Anatop MFD step time register offset - anatop-delay-bit-shift: Bit shift for the step time register - anatop-delay-bit-width: Number of bits used in the step time register +- vin-supply: The supply for this regulator Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt new file mode 100644 index 000000000000..443564d7784f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt @@ -0,0 +1,17 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists regulator specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA + +Optional subnodes: + - ldo1 : Initial data for the LDO1 regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt + - micvdd : Initial data for the MICVDD regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 79e5476444f7..09d796ed48be 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -8,7 +8,28 @@ regulators that can be controlled over I2C. Following properties should be present in main device node of the MFD chip. -Optional node: +Optional properties: +- inb1-supply: The input supply for BUCK1 +- inb2-supply: The input supply for BUCK2 +- inb3-supply: The input supply for BUCK3 +- inb4-supply: The input supply for BUCK4 +- inb5-supply: The input supply for BUCK5 +- inb6-supply: The input supply for BUCK6 +- inb7-supply: The input supply for BUCK7 +- inb8-supply: The input supply for BUCK8 +- inb9-supply: The input supply for BUCK9 +- inb10-supply: The input supply for BUCK10 +- inl1-supply: The input supply for LDO8 and LDO15 +- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 +- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 +- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 +- inl5-supply: The input supply for LDO9 and LDO19 +- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 +- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 +- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 +- inl10-supply: The input supply for LDO1 and LDO2 + +Optional nodes: - regulators : The regulators of max77802 have to be instantiated under subnode named "regulators" using the following format. @@ -58,6 +79,8 @@ Example: #address-cells = <1>; #size-cells = <0>; + inb1-supply = <&parent_reg>; + regulators { ldo1_reg: LDO1 { regulator-name = "vdd_1v0"; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 24bd422cecd5..1d112fc456aa 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,6 +11,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - regulator-allow-bypass: allow the regulator to go into bypass mode +- regulator-allow-set-load: allow the regulator performance level to be configured - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) For hardware which supports disabling ramp rate, it should be explicitly diff --git a/Documentation/devicetree/bindings/regulator/tps65023.txt b/Documentation/devicetree/bindings/regulator/tps65023.txt new file mode 100644 index 000000000000..a4714e4da370 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65023.txt @@ -0,0 +1,60 @@ +TPS65023 family of regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps65020", + "ti,tps65021", + "ti,tps65023", +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: VDCDC[1-3] and LDO[1-2] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + VDCDC1 { + regulator-name = "vdd_mpu"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + VDCDC2 { + regulator-name = "vdd_core"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDCDC3 { + regulator-name = "vdd_io"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "vdd_usb18"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO2 { + regulator-name = "vdd_usb33"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c index 5de95c265c1a..4a174cdb50b6 100644 --- a/drivers/mfd/tps6105x.c +++ b/drivers/mfd/tps6105x.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/mutex.h> +#include <linux/regmap.h> #include <linux/gpio.h> #include <linux/spinlock.h> #include <linux/slab.h> @@ -25,73 +25,18 @@ #include <linux/mfd/core.h> #include <linux/mfd/tps6105x.h> -int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value) -{ - int ret; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value); - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - return 0; -} -EXPORT_SYMBOL(tps6105x_set); - -int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf) -{ - int ret; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_read_byte_data(tps6105x->client, reg); - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - *buf = ret; - return 0; -} -EXPORT_SYMBOL(tps6105x_get); - -/* - * Masks off the bits in the mask and sets the bits in the bitvalues - * parameter in one atomic operation - */ -int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, - u8 bitmask, u8 bitvalues) -{ - int ret; - u8 regval; - - ret = mutex_lock_interruptible(&tps6105x->lock); - if (ret) - return ret; - ret = i2c_smbus_read_byte_data(tps6105x->client, reg); - if (ret < 0) - goto fail; - regval = ret; - regval = (~bitmask & regval) | (bitmask & bitvalues); - ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval); -fail: - mutex_unlock(&tps6105x->lock); - if (ret < 0) - return ret; - - return 0; -} -EXPORT_SYMBOL(tps6105x_mask_and_set); +static struct regmap_config tps6105x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TPS6105X_REG_3, +}; static int tps6105x_startup(struct tps6105x *tps6105x) { int ret; - u8 regval; + unsigned int regval; - ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val); + ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); if (ret) return ret; switch (regval >> TPS6105X_REG0_MODE_SHIFT) { @@ -145,11 +90,14 @@ static int tps6105x_probe(struct i2c_client *client, if (!tps6105x) return -ENOMEM; + tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config); + if (IS_ERR(tps6105x->regmap)) + return PTR_ERR(tps6105x->regmap); + i2c_set_clientdata(client, tps6105x); tps6105x->client = client; pdata = dev_get_platdata(&client->dev); tps6105x->pdata = pdata; - mutex_init(&tps6105x->lock); ret = tps6105x_startup(tps6105x); if (ret) { @@ -198,7 +146,7 @@ static int tps6105x_remove(struct i2c_client *client) mfd_remove_devices(&client->dev); /* Put chip in shutdown mode */ - tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, TPS6105X_REG0_MODE_MASK, TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 64bccff557be..8df0b0e62976 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -627,7 +627,7 @@ config REGULATOR_TI_ABB config REGULATOR_STW481X_VMMC bool "ST Microelectronics STW481X VMMC regulator" - depends on MFD_STW481X + depends on MFD_STW481X || COMPILE_TEST default y if MFD_STW481X help This driver supports the internal VMMC regulator in the STw481x diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 896db168e4bd..f8d4cd3d1397 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = { ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), }; +static const struct regulator_desc act8865_alt_regulators[] = { + ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"), + ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"), + ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"), + ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), + ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), + ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), + ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), +}; + #ifdef CONFIG_OF static const struct of_device_id act8865_dt_ids[] = { { .compatible = "active-semi,act8600", .data = (void *)ACT8600 }, @@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client, struct act8865 *act8865; unsigned long type; int off_reg, off_mask; + int voltage_select = 0; pdata = dev_get_platdata(dev); @@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client, return -ENODEV; type = (unsigned long) id->data; + + voltage_select = !!of_get_property(dev->of_node, + "active-semi,vsel-high", + NULL); } else { type = i2c_id->driver_data; } @@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client, off_mask = ACT8846_OFF_SYSMASK; break; case ACT8865: - regulators = act8865_regulators; - num_regulators = ARRAY_SIZE(act8865_regulators); + if (voltage_select) { + regulators = act8865_alt_regulators; + num_regulators = ARRAY_SIZE(act8865_alt_regulators); + } else { + regulators = act8865_regulators; + num_regulators = ARRAY_SIZE(act8865_regulators); + } off_reg = ACT8865_SYS_CTRL; off_mask = ACT8865_MSTROFF; break; diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 52ea605f8130..63cd5e68c864 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -30,6 +30,7 @@ #include <linux/regmap.h> #include <linux/regulator/driver.h> #include <linux/regulator/of_regulator.h> +#include <linux/regulator/machine.h> #define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */ #define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */ @@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) rdesc->owner = THIS_MODULE; initdata = of_get_regulator_init_data(dev, np, rdesc); + initdata->supply_regulator = "vin"; sreg->initdata = initdata; anatop_np = of_get_parent(np); @@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) rdesc->vsel_reg = sreg->control_reg; rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) << sreg->vol_bit_shift; + rdesc->min_dropout_uV = 125000; config.dev = &pdev->dev; config.init_data = initdata; diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 5e947a8ddb84..f7c88ff90c43 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -17,6 +17,7 @@ #include <linux/bitops.h> #include <linux/err.h> #include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -189,13 +190,22 @@ static int arizona_ldo1_of_get_pdata(struct arizona *arizona, { struct arizona_pdata *pdata = &arizona->pdata; struct arizona_ldo1 *ldo1 = config->driver_data; + struct device_node *np = arizona->dev->of_node; struct device_node *init_node, *dcvdd_node; struct regulator_init_data *init_data; - pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true); + pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0); + if (pdata->ldoena < 0) { + dev_warn(arizona->dev, + "LDOENA GPIO property missing/malformed: %d\n", + pdata->ldoena); + pdata->ldoena = 0; + } else { + config->ena_gpio_initialized = true; + } - init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1"); - dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0); + init_node = of_get_child_by_name(np, "ldo1"); + dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0); if (init_node) { config->of_node = init_node; @@ -245,6 +255,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) switch (arizona->type) { case WM5102: case WM8997: + case WM8998: + case WM1814: desc = &arizona_ldo1_hc; ldo1->init_data = arizona_ldo1_dvfs; break; @@ -272,8 +284,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev) ret = arizona_ldo1_of_get_pdata(arizona, &config, desc); if (ret < 0) return ret; - - config.ena_gpio_initialized = true; } } diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index a9567af7cec0..35de22fdb7a0 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -196,10 +196,10 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), /* secondary switchable output of DCDC1 */ - AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100, + AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100, AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), /* LDO regulator internally chained to DCDC5 */ - AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100, + AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100, AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100, AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), @@ -350,6 +350,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) }; int ret, i, nregulators; u32 workmode; + const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name; + const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name; switch (axp20x->variant) { case AXP202_ID: @@ -371,8 +373,37 @@ static int axp20x_regulator_probe(struct platform_device *pdev) axp20x_regulator_parse_dt(pdev); for (i = 0; i < nregulators; i++) { - rdev = devm_regulator_register(&pdev->dev, ®ulators[i], - &config); + const struct regulator_desc *desc = ®ulators[i]; + struct regulator_desc *new_desc; + + /* + * Regulators DC1SW and DC5LDO are connected internally, + * so we have to handle their supply names separately. + * + * We always register the regulators in proper sequence, + * so the supply names are correctly read. See the last + * part of this loop to see where we save the DT defined + * name. + */ + if (regulators == axp22x_regulators) { + if (i == AXP22X_DC1SW) { + new_desc = devm_kzalloc(&pdev->dev, + sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = axp22x_dc1_name; + desc = new_desc; + } else if (i == AXP22X_DC5LDO) { + new_desc = devm_kzalloc(&pdev->dev, + sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = axp22x_dc5_name; + desc = new_desc; + } + } + + rdev = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "Failed to register %s\n", regulators[i].name); @@ -388,6 +419,21 @@ static int axp20x_regulator_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Failed to set workmode on %s\n", rdev->desc->name); } + + /* + * Save AXP22X DCDC1 / DCDC5 regulator names for later. + */ + if (regulators == axp22x_regulators) { + /* Can we use rdev->constraints->name instead? */ + if (i == AXP22X_DCDC1) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &axp22x_dc1_name); + else if (i == AXP22X_DCDC5) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &axp22x_dc5_name); + } } return 0; diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index 628430bdc312..76b01835dcb4 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -244,7 +244,7 @@ static int bcm590xx_get_enable_register(int id) break; case BCM590XX_REG_VBUS: reg = BCM590XX_OTG_CTRL; - }; + } return reg; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 8a34f6acc801..73b7683355cd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -51,7 +51,6 @@ pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) static DEFINE_MUTEX(regulator_list_mutex); -static LIST_HEAD(regulator_list); static LIST_HEAD(regulator_map_list); static LIST_HEAD(regulator_ena_gpio_list); static LIST_HEAD(regulator_supply_alias_list); @@ -59,6 +58,8 @@ static bool has_full_constraints; static struct dentry *debugfs_root; +static struct class regulator_class; + /* * struct regulator_map * @@ -132,6 +133,45 @@ static bool have_full_constraints(void) } /** + * regulator_lock_supply - lock a regulator and its supplies + * @rdev: regulator source + */ +static void regulator_lock_supply(struct regulator_dev *rdev) +{ + struct regulator *supply; + int i = 0; + + while (1) { + mutex_lock_nested(&rdev->mutex, i++); + supply = rdev->supply; + + if (!rdev->supply) + return; + + rdev = supply->rdev; + } +} + +/** + * regulator_unlock_supply - unlock a regulator and its supplies + * @rdev: regulator source + */ +static void regulator_unlock_supply(struct regulator_dev *rdev) +{ + struct regulator *supply; + + while (1) { + mutex_unlock(&rdev->mutex); + supply = rdev->supply; + + if (!rdev->supply) + return; + + rdev = supply->rdev; + } +} + +/** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device * @supply: regulator supply name @@ -180,7 +220,7 @@ static int regulator_check_voltage(struct regulator_dev *rdev, return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { - rdev_err(rdev, "operation not allowed\n"); + rdev_err(rdev, "voltage operation not allowed\n"); return -EPERM; } @@ -240,7 +280,7 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { - rdev_err(rdev, "operation not allowed\n"); + rdev_err(rdev, "current operation not allowed\n"); return -EPERM; } @@ -277,7 +317,7 @@ static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode) return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { - rdev_err(rdev, "operation not allowed\n"); + rdev_err(rdev, "mode operation not allowed\n"); return -EPERM; } @@ -301,7 +341,7 @@ static int regulator_check_drms(struct regulator_dev *rdev) return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { - rdev_dbg(rdev, "operation not allowed\n"); + rdev_dbg(rdev, "drms operation not allowed\n"); return -EPERM; } return 0; @@ -1325,6 +1365,47 @@ static void regulator_supply_alias(struct device **dev, const char **supply) } } +static int of_node_match(struct device *dev, const void *data) +{ + return dev->of_node == data; +} + +static struct regulator_dev *of_find_regulator_by_node(struct device_node *np) +{ + struct device *dev; + + dev = class_find_device(®ulator_class, NULL, np, of_node_match); + + return dev ? dev_to_rdev(dev) : NULL; +} + +static int regulator_match(struct device *dev, const void *data) +{ + struct regulator_dev *r = dev_to_rdev(dev); + + return strcmp(rdev_get_name(r), data) == 0; +} + +static struct regulator_dev *regulator_lookup_by_name(const char *name) +{ + struct device *dev; + + dev = class_find_device(®ulator_class, NULL, name, regulator_match); + + return dev ? dev_to_rdev(dev) : NULL; +} + +/** + * regulator_dev_lookup - lookup a regulator device. + * @dev: device for regulator "consumer". + * @supply: Supply name or regulator ID. + * @ret: 0 on success, -ENODEV if lookup fails permanently, -EPROBE_DEFER if + * lookup could succeed in the future. + * + * If successful, returns a struct regulator_dev that corresponds to the name + * @supply and with the embedded struct device refcount incremented by one, + * or NULL on failure. The refcount must be dropped by calling put_device(). + */ static struct regulator_dev *regulator_dev_lookup(struct device *dev, const char *supply, int *ret) @@ -1340,10 +1421,9 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, if (dev && dev->of_node) { node = of_get_regulator(dev, supply); if (node) { - list_for_each_entry(r, ®ulator_list, list) - if (r->dev.parent && - node == r->dev.of_node) - return r; + r = of_find_regulator_by_node(node); + if (r) + return r; *ret = -EPROBE_DEFER; return NULL; } else { @@ -1361,20 +1441,24 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, if (dev) devname = dev_name(dev); - list_for_each_entry(r, ®ulator_list, list) - if (strcmp(rdev_get_name(r), supply) == 0) - return r; + r = regulator_lookup_by_name(supply); + if (r) + return r; + mutex_lock(®ulator_list_mutex); list_for_each_entry(map, ®ulator_map_list, list) { /* If the mapping has a device set up it must match */ if (map->dev_name && (!devname || strcmp(map->dev_name, devname))) continue; - if (strcmp(map->supply, supply) == 0) + if (strcmp(map->supply, supply) == 0 && + get_device(&map->regulator->dev)) { + mutex_unlock(®ulator_list_mutex); return map->regulator; + } } - + mutex_unlock(®ulator_list_mutex); return NULL; } @@ -1409,6 +1493,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) if (have_full_constraints()) { r = dummy_regulator_rdev; + get_device(&r->dev); } else { dev_err(dev, "Failed to resolve %s-supply for %s\n", rdev->supply_name, rdev->desc->name); @@ -1418,12 +1503,16 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) /* Recursively resolve the supply of the supply */ ret = regulator_resolve_supply(r); - if (ret < 0) + if (ret < 0) { + put_device(&r->dev); return ret; + } ret = set_supply(rdev, r); - if (ret < 0) + if (ret < 0) { + put_device(&r->dev); return ret; + } /* Cascade always-on state to supply */ if (_regulator_is_enabled(rdev) && rdev->supply) { @@ -1459,8 +1548,6 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, else ret = -EPROBE_DEFER; - mutex_lock(®ulator_list_mutex); - rdev = regulator_dev_lookup(dev, id, &ret); if (rdev) goto found; @@ -1472,7 +1559,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, * succeed, so, quit with appropriate error value */ if (ret && ret != -ENODEV) - goto out; + return regulator; if (!devname) devname = "deviceless"; @@ -1486,40 +1573,46 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, devname, id); rdev = dummy_regulator_rdev; + get_device(&rdev->dev); goto found; /* Don't log an error when called from regulator_get_optional() */ } else if (!have_full_constraints() || exclusive) { dev_warn(dev, "dummy supplies not allowed\n"); } - mutex_unlock(®ulator_list_mutex); return regulator; found: if (rdev->exclusive) { regulator = ERR_PTR(-EPERM); - goto out; + put_device(&rdev->dev); + return regulator; } if (exclusive && rdev->open_count) { regulator = ERR_PTR(-EBUSY); - goto out; + put_device(&rdev->dev); + return regulator; } ret = regulator_resolve_supply(rdev); if (ret < 0) { regulator = ERR_PTR(ret); - goto out; + put_device(&rdev->dev); + return regulator; } - if (!try_module_get(rdev->owner)) - goto out; + if (!try_module_get(rdev->owner)) { + put_device(&rdev->dev); + return regulator; + } regulator = create_regulator(rdev, dev, id); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); + put_device(&rdev->dev); module_put(rdev->owner); - goto out; + return regulator; } rdev->open_count++; @@ -1533,9 +1626,6 @@ found: rdev->use_count = 0; } -out: - mutex_unlock(®ulator_list_mutex); - return regulator; } @@ -1633,6 +1723,7 @@ static void _regulator_put(struct regulator *regulator) rdev->open_count--; rdev->exclusive = 0; + put_d |