diff options
| -rw-r--r-- | drivers/phy/phy-rockchip-emmc.c | 59 |
1 files changed, 37 insertions, 22 deletions
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c index 9dce958233a0..a2aa6aca7dec 100644 --- a/drivers/phy/phy-rockchip-emmc.c +++ b/drivers/phy/phy-rockchip-emmc.c @@ -88,15 +88,36 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) unsigned int caldone; unsigned int dllrdy; unsigned int freqsel = PHYCTRL_FREQSEL_200M; + unsigned long rate; unsigned long timeout; - if (rk_phy->emmcclk != NULL) { - unsigned long rate = clk_get_rate(rk_phy->emmcclk); + /* + * Keep phyctrl_pdb and phyctrl_endll low to allow + * initialization of CALIO state M/C DFFs + */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, + PHYCTRL_PDB_MASK, + PHYCTRL_PDB_SHIFT)); + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, + PHYCTRL_ENDLL_MASK, + PHYCTRL_ENDLL_SHIFT)); + + /* Already finish power_off above */ + if (on_off == PHYCTRL_PDB_PWR_OFF) + return 0; + + rate = clk_get_rate(rk_phy->emmcclk); + + if (rate != 0) { unsigned long ideal_rate; unsigned long diff; switch (rate) { - case 0 ... 74999999: + case 1 ... 74999999: ideal_rate = 50000000; freqsel = PHYCTRL_FREQSEL_50M; break; @@ -127,25 +148,6 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) } /* - * Keep phyctrl_pdb and phyctrl_endll low to allow - * initialization of CALIO state M/C DFFs - */ - regmap_write(rk_phy->reg_base, - rk_phy->reg_offset + GRF_EMMCPHY_CON6, - HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, - PHYCTRL_PDB_MASK, - PHYCTRL_PDB_SHIFT)); - regmap_write(rk_phy->reg_base, - rk_phy->reg_offset + GRF_EMMCPHY_CON6, - HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, - PHYCTRL_ENDLL_MASK, - PHYCTRL_ENDLL_SHIFT)); - - /* Already finish power_off above */ - if (on_off == PHYCTRL_PDB_PWR_OFF) - return 0; - - /* * According to the user manual, calpad calibration * cycle takes more than 2us without the minimal recommended * value, so we may need a little margin here @@ -183,6 +185,19 @@ static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE, PHYCTRL_ENDLL_MASK, PHYCTRL_ENDLL_SHIFT)); + + /* + * We turned on the DLL even though the rate was 0 because we the + * clock might be turned on later. ...but we can't wait for the DLL + * to lock when the rate is 0 because it will never lock with no + * input clock. + * + * Technically we should be checking the lock later when the clock + * is turned on, but for now we won't. + */ + if (rate == 0) + return 0; + /* * After enabling analog DLL circuits docs say that we need 10.2 us if * our source clock is at 50 MHz and that lock time scales linearly |