diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 2 | ||||
| -rw-r--r-- | drivers/ata/ahci.c | 18 | ||||
| -rw-r--r-- | drivers/ata/ahci_imx.c | 3 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 19 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 21 | ||||
| -rw-r--r-- | include/linux/libata.h | 1 | ||||
| -rw-r--r-- | kernel/freezer.c | 6 |
7 files changed, 58 insertions, 12 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 50680a59a2ff..b9e9bd854298 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1529,6 +1529,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. * atapi_dmadir: Enable ATAPI DMADIR bridge support + * disable: Disable this device. + If there are multiple matching configurations changing the same attribute, the last one is used. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 14f1e9506338..c0ed4f273cf2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1238,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - /* AHCI controllers often implement SFF compatible interface. - * Grab all PCI BARs just in case. - */ - rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == 0x2652 || pdev->device == 0x2653)) { u8 map; @@ -1263,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index ae2d73fe321e..3e23e9941dad 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) /* * set PHY Paremeters, two steps to configure the GPR13, * one write for rest of parameters, mask of first write - * is 0x07fffffd, and the other one write for setting + * is 0x07ffffff, and the other one write for setting * the mpll_clk_en. */ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK @@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio) | IMX6Q_GPR13_SATA_TX_ATTEN_MASK | IMX6Q_GPR13_SATA_TX_BOOST_MASK | IMX6Q_GPR13_SATA_TX_LVL_MASK + | IMX6Q_GPR13_SATA_MPLL_CLK_EN | IMX6Q_GPR13_SATA_TX_EDGE_RATE , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 75b93678bbcd..1393a5890ed5 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev, "failed to get NCQ Send/Recv Log Emask 0x%x\n", err_mask); } else { + u8 *cmds = dev->ncq_send_recv_cmds; + dev->flags |= ATA_DFLAG_NCQ_SEND_RECV; - memcpy(dev->ncq_send_recv_cmds, ap->sector_buf, - ATA_LOG_NCQ_SEND_RECV_SIZE); + memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE); + + if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) { + ata_dev_dbg(dev, "disabling queued TRIM support\n"); + cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &= + ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM; + } } } @@ -4156,6 +4163,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, + /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, @@ -4202,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* devices that don't properly handle queued TRIM commands */ + { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + /* End Marker */ { } }; @@ -6519,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur, { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, + { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, }; char *start = *cur, *p = *cur; char *id, *val, *endp; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index ab58556d347c..377eb889f555 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3872,6 +3872,27 @@ void ata_scsi_hotplug(struct work_struct *work) return; } + /* + * XXX - UGLY HACK + * + * The block layer suspend/resume path is fundamentally broken due + * to freezable kthreads and workqueue and may deadlock if a block + * device gets removed while resume is in progress. I don't know + * what the solution is short of removing freezable kthreads and + * workqueues altogether. + * + * The following is an ugly hack to avoid kicking off device + * removal while freezer is active. This is a joke but does avoid + * this particular deadlock scenario. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=62801 + * http://marc.info/?l=linux-kernel&m=138695698516487 + */ +#ifdef CONFIG_FREEZER + while (pm_freezing) + msleep(10); +#endif + DPRINTK("ENTER\n"); mutex_lock(&ap->scsi_scan_mutex); diff --git a/include/linux/libata.h b/include/linux/libata.h index 0e23c26485f4..9b503376738f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -418,6 +418,7 @@ enum { ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */ ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */ ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */ + ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ diff --git a/kernel/freezer.c b/kernel/freezer.c index b462fa197517..aa6a8aadb911 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt); bool pm_freezing; bool pm_nosig_freezing; +/* + * Temporary export for the deadlock workaround in ata_scsi_hotplug(). + * Remove once the hack becomes unnecessary. + */ +EXPORT_SYMBOL_GPL(pm_freezing); + /* protects freezing and frozen transitions */ static DEFINE_SPINLOCK(freezer_lock); |