diff options
102 files changed, 420 insertions, 433 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d9f85464b362..69aff72c8957 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4492,6 +4492,7 @@ static int __init bonding_init(void) out: return res; err: + bond_destroy_debugfs(); bond_netlink_fini(); err_link: unregister_pernet_subsys(&bond_net_ops); diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 30104b60da85..c56ac9ebc08f 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -560,9 +560,7 @@ static struct net_device *apne_dev; static int __init apne_module_init(void) { apne_dev = apne_probe(-1); - if (IS_ERR(apne_dev)) - return PTR_ERR(apne_dev); - return 0; + return PTR_ERR_OR_ZERO(apne_dev); } static void __exit apne_module_exit(void) diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index fcaeeb8a4929..28460676b8ca 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -268,15 +268,6 @@ static unsigned int emac_setup(struct net_device *ndev) writel(reg_val | EMAC_TX_MODE_ABORTED_FRAME_EN, db->membase + EMAC_TX_MODE_REG); - /* set up RX */ - reg_val = readl(db->membase + EMAC_RX_CTL_REG); - - writel(reg_val | EMAC_RX_CTL_PASS_LEN_OOR_EN | - EMAC_RX_CTL_ACCEPT_UNICAST_EN | EMAC_RX_CTL_DA_FILTER_EN | - EMAC_RX_CTL_ACCEPT_MULTICAST_EN | - EMAC_RX_CTL_ACCEPT_BROADCAST_EN, - db->membase + EMAC_RX_CTL_REG); - /* set MAC */ /* set MAC CTL0 */ reg_val = readl(db->membase + EMAC_MAC_CTL0_REG); @@ -309,6 +300,26 @@ static unsigned int emac_setup(struct net_device *ndev) return 0; } +static void emac_set_rx_mode(struct net_device *ndev) +{ + struct emac_board_info *db = netdev_priv(ndev); + unsigned int reg_val; + + /* set up RX */ + reg_val = readl(db->membase + EMAC_RX_CTL_REG); + + if (ndev->flags & IFF_PROMISC) + reg_val |= EMAC_RX_CTL_PASS_ALL_EN; + else + reg_val &= ~EMAC_RX_CTL_PASS_ALL_EN; + + writel(reg_val | EMAC_RX_CTL_PASS_LEN_OOR_EN | + EMAC_RX_CTL_ACCEPT_UNICAST_EN | EMAC_RX_CTL_DA_FILTER_EN | + EMAC_RX_CTL_ACCEPT_MULTICAST_EN | + EMAC_RX_CTL_ACCEPT_BROADCAST_EN, + db->membase + EMAC_RX_CTL_REG); +} + static unsigned int emac_powerup(struct net_device *ndev) { struct emac_board_info *db = netdev_priv(ndev); @@ -782,6 +793,7 @@ static const struct net_device_ops emac_netdev_ops = { .ndo_stop = emac_stop, .ndo_start_xmit = emac_start_xmit, .ndo_tx_timeout = emac_timeout, + .ndo_set_rx_mode = emac_set_rx_mode, .ndo_do_ioctl = emac_ioctl, .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 2879b9631e15..c1d3fdb296a0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -115,8 +115,6 @@ static DEFINE_SPINLOCK(e1000_phy_lock); */ static s32 e1000_set_phy_type(struct e1000_hw *hw) { - e_dbg("e1000_set_phy_type"); - if (hw->mac_type == e1000_undefined) return -E1000_ERR_PHY_TYPE; @@ -159,8 +157,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) u32 ret_val; u16 phy_saved_data; - e_dbg("e1000_phy_init_script"); - if (hw->phy_init_script) { msleep(20); @@ -253,8 +249,6 @@ static void e1000_phy_init_script(struct e1000_hw *hw) */ s32 e1000_set_mac_type(struct e1000_hw *hw) { - e_dbg("e1000_set_mac_type"); - switch (hw->device_id) { case E1000_DEV_ID_82542: switch (hw->revision_id) { @@ -365,8 +359,6 @@ void e1000_set_media_type(struct e1000_hw *hw) { u32 status; - e_dbg("e1000_set_media_type"); - if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ hw->tbi_compatibility_en = false; @@ -415,8 +407,6 @@ s32 e1000_reset_hw(struct e1000_hw *hw) u32 led_ctrl; s32 ret_val; - e_dbg("e1000_reset_hw"); - /* For 82542 (rev 2.0), disable MWI before issuing a device reset */ if (hw->mac_type == e1000_82542_rev2_0) { e_dbg("Disabling MWI on 82542 rev 2.0\n"); @@ -566,8 +556,6 @@ s32 e1000_init_hw(struct e1000_hw *hw) u32 mta_size; u32 ctrl_ext; - e_dbg("e1000_init_hw"); - /* Initialize Identification LED */ ret_val = e1000_id_led_init(hw); if (ret_val) { @@ -683,8 +671,6 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) u16 eeprom_data; s32 ret_val; - e_dbg("e1000_adjust_serdes_amplitude"); - if (hw->media_type != e1000_media_type_internal_serdes) return E1000_SUCCESS; @@ -730,8 +716,6 @@ s32 e1000_setup_link(struct e1000_hw *hw) s32 ret_val; u16 eeprom_data; - e_dbg("e1000_setup_link"); - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -848,8 +832,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) u32 signal = 0; s32 ret_val; - e_dbg("e1000_setup_fiber_serdes_link"); - /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -1051,8 +1033,6 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_preconfig"); - ctrl = er32(CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to * what the PHY speed and duplex configuration is. In addition, we need @@ -1112,8 +1092,6 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_igp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1254,8 +1232,6 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_mgp_setup"); - if (hw->phy_reset_disable) return E1000_SUCCESS; @@ -1362,8 +1338,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_copper_link_autoneg"); - /* Perform some bounds checking on the hw->autoneg_advertised * parameter. If this variable is zero, then set it to the default. */ @@ -1432,7 +1406,6 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { s32 ret_val; - e_dbg("e1000_copper_link_postconfig"); if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) { e1000_config_collision_dist(hw); @@ -1473,8 +1446,6 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_setup_copper_link"); - /* Check if it is a valid PHY and set PHY mode if necessary. */ ret_val = e1000_copper_link_preconfig(hw); if (ret_val) @@ -1554,8 +1525,6 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) u16 mii_autoneg_adv_reg; u16 mii_1000t_ctrl_reg; - e_dbg("e1000_phy_setup_autoneg"); - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); if (ret_val) @@ -1707,8 +1676,6 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) u16 phy_data; u16 i; - e_dbg("e1000_phy_force_speed_duplex"); - /* Turn off Flow control if we are forcing speed and duplex. */ hw->fc = E1000_FC_NONE; @@ -1939,8 +1906,6 @@ void e1000_config_collision_dist(struct e1000_hw *hw) { u32 tctl, coll_dist; - e_dbg("e1000_config_collision_dist"); - if (hw->mac_type < e1000_82543) coll_dist = E1000_COLLISION_DISTANCE_82542; else @@ -1970,8 +1935,6 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_config_mac_to_phy"); - /* 82544 or newer MAC, Auto Speed Detection takes care of * MAC speed/duplex configuration. */ @@ -2049,8 +2012,6 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw) { u32 ctrl; - e_dbg("e1000_force_mac_fc"); - /* Get the current configuration of the Device Control Register */ ctrl = er32(CTRL); @@ -2120,8 +2081,6 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) u16 speed; u16 duplex; - e_dbg("e1000_config_fc_after_link_up"); - /* Check for the case where we have fiber media and auto-neg failed * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. @@ -2337,8 +2296,6 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) u32 status; s32 ret_val = E1000_SUCCESS; - e_dbg("e1000_check_for_serdes_link_generic"); - ctrl = er32(CTRL); status = er32(STATUS); rxcw = er32(RXCW); @@ -2449,8 +2406,6 @@ s32 e1000_check_for_link(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - e_dbg("e1000_check_for_link"); - ctrl = er32(CTRL); status = er32(STATUS); @@ -2632,8 +2587,6 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) s32 ret_val; u16 phy_data; - e_dbg("e1000_get_speed_and_duplex"); - if (hw->mac_type >= e1000_82543) { status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { @@ -2699,7 +2652,6 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) u16 i; u16 phy_data; - e_dbg("e1000_wait_autoneg"); e_dbg("Waiting for Auto-Neg to complete.\n"); /* We will wait for autoneg to complete or 4.5 seconds to expire. */ @@ -2866,8 +2818,6 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_read_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -2894,8 +2844,6 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_read_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; @@ -3008,8 +2956,6 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) u32 ret_val; unsigned long flags; - e_dbg("e1000_write_phy_reg"); - spin_lock_irqsave(&e1000_phy_lock, flags); if ((hw->phy_type == e1000_phy_igp) && @@ -3036,8 +2982,6 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, u32 mdic = 0; const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1; - e_dbg("e1000_write_phy_reg_ex"); - if (reg_addr > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", reg_addr); return -E1000_ERR_PARAM; |