diff options
43 files changed, 1387 insertions, 569 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt index 80b9a94d9a23..8b53273cb22f 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -38,3 +38,23 @@ Example: reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + +* Marvell Orion Interrupt controller + +Required properties +- compatible : Should be "marvell,orion-intc". +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. Supported value is <1>. +- interrupt-controller : Declare this node to be an interrupt controller. +- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. + One entry in the list represents 32 interrupts. + +Example: + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt new file mode 100644 index 000000000000..b5cdd20cde9c --- /dev/null +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -0,0 +1,16 @@ +* Marvell Orion SATA + +Required Properties: +- compatibility : "marvell,orion-sata" +- reg : Address range of controller +- interrupts : Interrupt controller is using +- nr-ports : Number of SATA ports in use. + +Example: + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + nr-ports = <2>; + } diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 05428f39d9ac..e13787498bcf 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -27,3 +27,26 @@ Example: interrupt-controller; #interrupt-cells = <1>; }; + +* Marvell Orion GPIO Controller + +Required properties: +- compatible : Should be "marvell,orion-gpio" +- reg : Address and length of the register set for controller. +- gpio-controller : So we know this is a gpio controller. +- ngpio : How many gpios this controller has. +- interrupts : Up to 4 Interrupts for the controller. + +Optional properties: +- mask-offset : For SMP Orions, offset for Nth CPU + +Example: + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt new file mode 100644 index 000000000000..0b2503ab0a05 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt @@ -0,0 +1,14 @@ +* Marvell Orion Watchdog Time + +Required Properties: + +- Compatibility : "marvell,orion-wdt" +- reg : Address of the timer registers + +Example: + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7980873525b2..e91c7cdc6fe5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1151,6 +1151,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select COMMON_CLK config PLAT_PXA diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 9a33077130e8..5bb0bf39d3b8 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + blue-power { + label = "dns320:blue:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + blue-usb { + label = "dns320:blue:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + orange-l_hdd { + label = "dns320:orange:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + orange-r_hdd { + label = "dns320:orange:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + orange-usb { + label = "dns320:orange:usb"; + gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + }; + }; + ocp@f1000000 { serial@12000 { clock-frequency = <166666667>; @@ -25,40 +50,5 @@ clock-frequency = <166666667>; status = "okay"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 16734c1b5dfe..d430713ea9b9 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; @@ -15,45 +15,43 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + white-power { + label = "dns325:white:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + white-usb { + label = "dns325:white:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + red-l_hdd { + label = "dns325:red:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ }; + red-r_hdd { + label = "dns325:red:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + red-usb { + label = "dns325:red:usb"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + }; + }; - nand@3000000 { + ocp@f1000000 { + i2c@11000 { status = "okay"; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; + lm75: lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; }; }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi new file mode 100644 index 000000000000..7408655f91b5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -0,0 +1,69 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS NASes (kirkwood-based)"; + compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power button"; + linux,code = <116>; + gpios = <&gpio1 2 1>; + }; + button@2 { + label = "USB unmount button"; + linux,code = <161>; + gpios = <&gpio1 15 1>; + }; + button@3 { + label = "Reset button"; + linux,code = <0x198>; + gpios = <&gpio1 16 1>; + }; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 78b0f06a09a2..26e281fbf6bc 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -20,5 +20,55 @@ clock-frequency = <200000000>; status = "ok"; }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l1606e"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "u-boot env"; + }; + + partition@180000 { + reg = <0x180000 0x10000>; + label = "dtb"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + bluetooth { + label = "dreamplug:blue:bluetooth"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "dreamplug:green:wifi"; + gpios = <&gpio1 16 1>; + }; + wifi-ap { + label = "dreamplug:green:wifi_ap"; + gpios = <&gpio1 17 1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 000000000000..7c8238fbb6f9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 0>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 0>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 0>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 0>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 0>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 0>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 0>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index f59dcf6dc45f..66794ed75ff1 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; @@ -41,4 +46,37 @@ }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 29 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 28 1>; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 0>; + linux,default-trigger = "default-on"; + }; + red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 0>; + }; + usb-copy { + label = "ib62x0:red:usb_copy"; + gpios = <&gpio0 27 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 026a1f82d813..52d947045106 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -18,9 +18,51 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; }; }; + gpio-leds { + compatible = "gpio-leds"; + + led-level { + label = "led_level"; + gpios = <&gpio1 9 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "power:blue"; + gpios = <&gpio1 11 0>; + linux,default-trigger = "timer"; + }; + usb1 { + label = "usb1:blue"; + gpios = <&gpio1 12 0>; + }; + usb2 { + label = "usb2:blue"; + gpios = <&gpio1 13 0>; + }; + usb3 { + label = "usb3:blue"; + gpios = <&gpio1 14 0>; + }; + usb4 { + label = "usb4:blue"; + gpios = <&gpio1 15 0>; + }; + otb { + label = "otb:blue"; + gpios = <&gpio1 16 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts new file mode 100644 index 000000000000..9510c9ea666c --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-CHLv2"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts new file mode 100644 index 000000000000..739019c4cba9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-XHL"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi new file mode 100644 index 000000000000..8ac51c08269d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -0,0 +1,95 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Function Button"; + linux,code = <132>; + gpios = <&gpio1 9 1>; + }; + button@2 { + label = "Power-on Switch"; + linux,code = <116>; + gpios = <&gpio1 10 1>; + }; + button@3 { + label = "Power-auto Switch"; + linux,code = <142>; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "lschlv2:blue:func"; + gpios = <&gpio1 4 1>; + }; + + led@2 { + label = "lschlv2:red:alarm"; + gpios = <&gpio1 5 1>; + }; + + led@3 { + label = "lschlv2:amber:info"; + gpios = <&gpio1 6 1>; + }; + + led@4 { + label = "lschlv2:blue:power"; + gpios = <&gpio1 7 1>; + linux,default-trigger = "default-on"; + }; + + led@5 { + label = "lschlv2:red:func"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts new file mode 100644 index 000000000000..ccbf32757800 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 15 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 16 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts new file mode 100644 index 000000000000..fbe9932161a1 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio1 11 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio1 5 1>; + }; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi new file mode 100644 index 000000000000..64ea27cb3298 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -0,0 +1,78 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "QNAP TS219 family"; + compatible = "qnap,ts219", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <200000000>; + status = "okay"; + }; + spi@10600 { + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0000000 { + reg = <0x00000000 0x00080000>; + label = "U-Boot"; + }; + + partition@00200000 { + reg = <0x00200000 0x00200000>; + label = "Kernel"; + }; + + partition@00400000 { + reg = <0x00400000 0x00900000>; + label = "RootFS1"; + }; + partition@00d00000 { + reg = <0x00d00000 0x00300000>; + label = "RootFS2"; + }; + partition@00040000 { + reg = <0x00080000 0x00040000>; + label = "U-Boot Config"; |