diff options
34 files changed, 1349 insertions, 71 deletions
diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt new file mode 100644 index 000000000000..10dec1c57abf --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt @@ -0,0 +1,21 @@ +* D-Link DIR-685 Touchkeys + +This is a I2C one-off touchkey controller based on the Cypress Semiconductor +CY8C214 MCU with some firmware in its internal 8KB flash. The circuit +board inside the router is named E119921. + +The touchkey device node should be placed inside an I2C bus node. + +Required properties: +- compatible: must be "dlink,dir685-touchkeys" +- reg: the I2C address of the touchkeys +- interrupts: reference to the interrupt number + +Example: + +touchkeys@26 { + compatible = "dlink,dir685-touchkeys"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt new file mode 100644 index 000000000000..9683595cd0f5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt @@ -0,0 +1,43 @@ +* ST-Microelectronics FingerTip touchscreen controller + +The ST-Microelectronics FingerTip device provides a basic touchscreen +functionality. Along with it the user can enable the touchkey which can work as +a basic HOME and BACK key for phones. + +The driver supports also hovering as an absolute single touch event with x, y, z +coordinates. + +Required properties: +- compatible : must be "st,stmfts" +- reg : I2C slave address, (e.g. 0x49) +- interrupt-parent : the phandle to the interrupt controller which provides + the interrupt +- interrupts : interrupt specification +- avdd-supply : analogic power supply +- vdd-supply : power supply +- touchscreen-size-x : see touchscreen.txt +- touchscreen-size-y : see touchscreen.txt + +Optional properties: +- touch-key-connected : specifies whether the touchkey feature is connected +- ledvdd-supply : power supply to the touch key leds + +Example: + +i2c@00000000 { + + /* ... */ + + touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_NONE>; + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + ledvdd-supply = <&ldo33_reg>; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 154bf8fbf683..c152202ed519 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3846,6 +3846,12 @@ S: Supported F: drivers/input/touchscreen/cyttsp* F: include/linux/input/cyttsp.h +D-LINK DIR-685 TOUCHKEYS DRIVER +M: Linus Walleij <linus.walleij@linaro.org> +L: linux-input@vger.kernel.org +S: Supported +F: drivers/input/dlink-dir685-touchkeys.c + DALLAS/MAXIM DS1685-FAMILY REAL TIME CLOCK M: Joshua Kinard <kumba@gentoo.org> S: Maintained @@ -6689,8 +6695,10 @@ S: Maintained F: drivers/input/ F: include/linux/input.h F: include/uapi/linux/input.h +F: include/uapi/linux/input-event-codes.h F: include/linux/input/ F: Documentation/devicetree/bindings/input/ +F: Documentation/input/ INPUT MULTITOUCH (MT) PROTOCOL M: Henrik Rydberg <rydberg@bitmath.org> diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6d612792f6b8..1faf6cb93dcb 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -24,7 +24,7 @@ #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> +#include <linux/platform_data/tsc2007.h> #include <linux/spi/spi.h> #include <linux/spi/sh_msiof.h> #include <linux/spi/mmc_spi.h> diff --git a/drivers/input/input.c b/drivers/input/input.c index 067d648028a2..7e6842bd525c 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -481,7 +481,7 @@ EXPORT_SYMBOL(input_inject_event); void input_alloc_absinfo(struct input_dev *dev) { if (!dev->absinfo) - dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo), + dev->absinfo = kcalloc(ABS_CNT, sizeof(*dev->absinfo), GFP_KERNEL); WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__); @@ -1126,7 +1126,7 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name, * If no output was produced print a single 0. */ if (skip_empty) - seq_puts(seq, "0"); + seq_putc(seq, '0'); seq_putc(seq, '\n'); } @@ -1144,7 +1144,7 @@ static int input_devices_seq_show(struct seq_file *seq, void *v) seq_printf(seq, "P: Phys=%s\n", dev->phys ? dev->phys : ""); seq_printf(seq, "S: Sysfs=%s\n", path ? path : ""); seq_printf(seq, "U: Uniq=%s\n", dev->uniq ? dev->uniq : ""); - seq_printf(seq, "H: Handlers="); + seq_puts(seq, "H: Handlers="); list_for_each_entry(handle, &dev->h_list, d_node) seq_printf(seq, "%s ", handle->name); @@ -1783,7 +1783,7 @@ struct input_dev *input_allocate_device(void) static atomic_t input_no = ATOMIC_INIT(-1); struct input_dev *dev; - dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev) { dev->dev.type = &input_dev_type; dev->dev.class = &input_class; @@ -1849,7 +1849,7 @@ struct input_dev *devm_input_allocate_device(struct device *dev) struct input_devres *devres; devres = devres_alloc(devm_input_device_release, - sizeof(struct input_devres), GFP_KERNEL); + sizeof(*devres), GFP_KERNEL); if (!devres) return NULL; @@ -2099,7 +2099,7 @@ int input_register_device(struct input_dev *dev) if (dev->devres_managed) { devres = devres_alloc(devm_input_device_unregister, - sizeof(struct input_devres), GFP_KERNEL); + sizeof(*devres), GFP_KERNEL); if (!devres) return -ENOMEM; diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index def96cd2479b..298a6ba51411 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -126,13 +126,18 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { + { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, + { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, + { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX }, { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 }, { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX }, { 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX }, + { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX }, { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, + { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 }, { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, @@ -145,28 +150,52 @@ static const struct xpad_device { { 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 }, { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX }, { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX }, + { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX }, + { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 }, { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 }, { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX }, { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX }, + { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX }, + { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX }, + { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX }, + { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX }, + { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX }, + { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX }, + { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX }, + { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, { 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX }, { 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, + { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX }, { 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX }, { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX }, + { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX }, + { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX }, + { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 }, { 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 }, { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 }, + { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, { 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, { 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 }, { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 }, + { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 }, + { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX }, + { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX }, { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX }, @@ -174,37 +203,63 @@ static const struct xpad_device { { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX }, { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX }, + { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX }, + { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX }, { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 }, { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX }, { 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX }, { 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 }, + { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 }, { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE }, + { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, + { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 }, + { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, @@ -215,22 +270,44 @@ static const struct xpad_device { { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE }, @@ -238,12 +315,19 @@ static const struct xpad_device { { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 }, { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; @@ -331,13 +415,16 @@ static struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */ XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */ + XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ + XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 97acd6524ad7..4c4ab1ced235 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X To compile this driver as a module, choose M here: the module will be called clps711x-keypad. +config KEYBOARD_DLINK_DIR685 + tristate "D-Link DIR-685 touchkeys support" + depends on I2C + default ARCH_GEMINI + help + If you say yes here you get support for the D-Link DIR-685 + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called dlink-dir685-touchkeys. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 7d9acff819a7..d2338bacdad1 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o +obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c new file mode 100644 index 000000000000..88e321b76397 --- /dev/null +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -0,0 +1,155 @@ +/* + * D-Link DIR-685 router I2C-based Touchkeys input driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This is a one-off touchkey controller based on the Cypress Semiconductor + * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit + * board inside the router is named E119921 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +struct dir685_touchkeys { + struct device *dev; + struct i2c_client *client; + struct input_dev *input; + unsigned long cur_key; + u16 codes[7]; +}; + +static irqreturn_t dir685_tk_irq_thread(int irq, void *data) +{ + struct dir685_touchkeys *tk = data; + const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16); + unsigned long changed; + u8 buf[6]; + unsigned long key; + int i; + int err; + + memset(buf, 0, sizeof(buf)); + err = i2c_master_recv(tk->client, buf, sizeof(buf)); + if (err != sizeof(buf)) { + dev_err(tk->dev, "short read %d\n", err); + return IRQ_HANDLED; + } + + dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf); + key = be16_to_cpup((__be16 *) &buf[4]); + + /* Figure out if any bits went high or low since last message */ + changed = tk->cur_key ^ key; + for_each_set_bit(i, &changed, num_bits) { + dev_dbg(tk->dev, "key %d is %s\n", i, + test_bit(i, &key) ? "down" : "up"); + input_report_key(tk->input, tk->codes[i], test_bit(i, &key)); + } + + /* Store currently down keys */ + tk->cur_key = key; + input_sync(tk->input); + + return IRQ_HANDLED; +} + +static int dir685_tk_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dir685_touchkeys *tk; + struct device *dev = &client->dev; + u8 bl_data[] = { 0xa7, 0x40 }; + int err; + int i; + + tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL); + if (!tk) + return -ENOMEM; + + tk->input = devm_input_allocate_device(dev); + if (!tk->input) + return -ENOMEM; + + tk->client = client; + tk->dev = dev; + + tk->input->keycodesize = sizeof(u16); + tk->input->keycodemax = ARRAY_SIZE(tk->codes); + tk->input->keycode = tk->codes; + tk->codes[0] = KEY_UP; + tk->codes[1] = KEY_DOWN; + tk->codes[2] = KEY_LEFT; + tk->codes[3] = KEY_RIGHT; + tk->codes[4] = KEY_ENTER; + tk->codes[5] = KEY_WPS_BUTTON; + /* + * This key appears in the vendor driver, but I have + * not been able to activate it. + */ + tk->codes[6] = KEY_RESERVED; + + __set_bit(EV_KEY, tk->input->evbit); + for (i = 0; i < ARRAY_SIZE(tk->codes); i++) + __set_bit(tk->codes[i], tk->input->keybit); + __clear_bit(KEY_RESERVED, tk->input->keybit); + + tk->input->name = "D-Link DIR-685 touchkeys"; + tk->input->id.bustype = BUS_I2C; + + err = input_register_device(tk->input); + if (err) + return err; + + /* Set the brightness to max level */ + err = i2c_master_send(client, bl_data, sizeof(bl_data)); + if (err != sizeof(bl_data)) + dev_warn(tk->dev, "error setting brightness level\n"); + + if (!client->irq) { + dev_err(dev, "no IRQ on the I2C device\n"); + return -ENODEV; + } + err = devm_request_threaded_irq(dev, client->irq, + NULL, dir685_tk_irq_thread, + IRQF_ONESHOT, + "dir685-tk", tk); + if (err) { + dev_err(dev, "can't request IRQ\n"); + return err; + } + + return 0; +} + +static const struct i2c_device_id dir685_tk_id[] = { + { "dir685tk", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dir685_tk_id); + +#ifdef CONFIG_OF +static const struct of_device_id dir685_tk_of_match[] = { + { .compatible = "dlink,dir685-touchkeys" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dir685_tk_of_match); +#endif + +static struct i2c_driver dir685_tk_i2c_driver = { + .driver = { + .name = "dlin-dir685-touchkeys", + .of_match_table = of_match_ptr(dir685_tk_of_match), + }, + .probe = dir685_tk_probe, + .id_table = dir685_tk_id, +}; +module_i2c_driver(dir685_tk_i2c_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 21bea52d4365..04a5d7e134d7 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -30,8 +30,8 @@ #include <linux/delay.h> #include <linux/input.h> #include <linux/leds.h> +#include <linux/platform_data/lm8323.h> #include <linux/pm.h> -#include <linux/i2c/lm8323.h> #include <linux/slab.h> /* Commands to send to the chip. */ diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c index 31090d71a685..be56d4f262a7 100644 --- a/drivers/input/keyboard/mcs_touchkey.c +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -13,11 +13,11 @@ #include <linux/module.h> #include <linux/i2c.h> -#include <linux/i2c/mcs.h> #include <linux/interrupt.h> #include <linux/input.h> #include <linux/irq.h> #include <linux/slab.h> +#include <linux/platform_data/mcs.h> #include <linux/pm.h> /* MCS5000 Touchkey */ diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index 400869e61a06..38c79ebff033 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -253,6 +253,9 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, return error; } + if (axp20x_pek->axp20x->variant == AXP288_ID) + enable_irq_wake(axp20x_pek->irq_dbr); + return 0; } @@ -331,10 +334,35 @@ static int axp20x_pek_probe(struct platform_device *pdev) return 0; } +static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev) +{ + struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); + + if (axp20x_pek->axp20x->variant != AXP288_ID) + return 0; + + /* + * Clear interrupts from button presses during suspend, to avoid + * a wakeup power-button press getting reported to userspace. + */ + regmap_write(axp20x_pek->axp20x->regmap, + AXP20X_IRQ1_STATE + AXP288_IRQ_POKN / 8, + BIT(AXP288_IRQ_POKN % 8)); + + return 0; +} + +static const struct dev_pm_ops axp20x_pek_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .resume_noirq = axp20x_pek_resume_noirq, +#endif +}; + static struct platform_driver axp20x_pek_driver = { .probe = axp20x_pek_probe, .driver = { .name = "axp20x-pek", + .pm = &axp20x_pek_pm_ops, }, }; module_platform_driver(axp20x_pek_driver); diff --git a/drivers/ |