diff options
68 files changed, 2931 insertions, 787 deletions
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt index e5c5f5e6ab70..f6215f95149b 100644 --- a/Documentation/connector/connector.txt +++ b/Documentation/connector/connector.txt @@ -24,7 +24,8 @@ netlink based networking for inter-process communication in a significantly easier way: int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *)); -void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask); +void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask); +void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask); struct cb_id { @@ -71,15 +72,21 @@ void cn_del_callback(struct cb_id *id); struct cb_id *id - unique connector's user identifier. -int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); +int cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __groups, int gfp_mask); +int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __groups, int gfp_mask); Sends message to the specified groups. It can be safely called from softirq context, but may silently fail under strong memory pressure. If there are no listeners for given group -ESRCH can be returned. struct cn_msg * - message header(with attached data). + u16 len - for *_multi multiple cn_msg messages can be sent + u32 port - destination port. + If non-zero the message will be sent to the + given port, which should be set to the + original sender. u32 __group - destination group. - If __group is zero, then appropriate group will + If port and __group is zero, then appropriate group will be searched through all registered connector users, and message will be delivered to the group which was created for user with the same ID as in msg. @@ -111,7 +118,7 @@ acknowledge number MUST be the same + 1. If we receive a message and its sequence number is not equal to one we are expecting, then it is a new message. If we receive a message and its sequence number is the same as one we are expecting, but its -acknowledge is not equal to the acknowledge number in the original +acknowledge is not equal to the sequence number in the original message + 1, then it is a new message. Obviously, the protocol header contains the above id. diff --git a/Documentation/devicetree/bindings/misc/arm-charlcd.txt b/Documentation/devicetree/bindings/misc/arm-charlcd.txt new file mode 100644 index 000000000000..e28e2aac47f1 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/arm-charlcd.txt @@ -0,0 +1,18 @@ +ARM Versatile Character LCD +----------------------------------------------------- +This binding defines the character LCD interface found on ARM Versatile AB +and PB reference platforms. + +Required properties: +- compatible : "arm,versatile-clcd" +- reg : Location and size of character LCD registers + +Optional properties: +- interrupts - single interrupt for character LCD. The character LCD can + operate in polled mode without an interrupt. + +Example: + lcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt index 462a42fb3a1e..4bb10d161a27 100644 --- a/Documentation/devicetree/bindings/spmi/spmi.txt +++ b/Documentation/devicetree/bindings/spmi/spmi.txt @@ -26,7 +26,7 @@ Each child node must have one and only one 'reg' entry of type SPMI_USID. reg = <...>; #address-cells = <2>; - #size-cells <0>; + #size-cells = <0>; child@0 { compatible = "..."; diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index a31c5a242973..b2033c64c7da 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -82,7 +82,7 @@ driver - (standard) symlink to the w1 driver w1_master_add - Manually register a slave device w1_master_attempts - the number of times a search was attempted w1_master_max_slave_count - - the maximum slaves that may be attached to a master + - maximum number of slaves to search for at a time w1_master_name - the name of the device (w1_bus_masterX) w1_master_pullup - 5V strong pullup 0 enabled, 1 disabled w1_master_remove - Manually remove a slave device diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink index 927a52cc0519..ef2727192d69 100644 --- a/Documentation/w1/w1.netlink +++ b/Documentation/w1/w1.netlink @@ -30,7 +30,7 @@ Protocol. W1_SLAVE_CMD userspace command for slave device (read/write/touch) - __u8 res - reserved + __u8 status - error indication from kernel __u16 len - size of data attached to this header data union { __u8 id[8]; - slave unique device id @@ -44,10 +44,14 @@ Protocol. __u8 cmd - command opcode. W1_CMD_READ - read command W1_CMD_WRITE - write command - W1_CMD_TOUCH - touch command - (write and sample data back to userspace) W1_CMD_SEARCH - search command W1_CMD_ALARM_SEARCH - alarm search command + W1_CMD_TOUCH - touch command + (write and sample data back to userspace) + W1_CMD_RESET - send bus reset + W1_CMD_SLAVE_ADD - add slave to kernel list + W1_CMD_SLAVE_REMOVE - remove slave from kernel list + W1_CMD_LIST_SLAVES - get slaves list from kernel __u8 res - reserved __u16 len - length of data for this command For read command data must be allocated like for write command @@ -87,8 +91,7 @@ format: id0 ... idN Each message is at most 4k in size, so if number of master devices - exceeds this, it will be split into several messages, - cn.seq will be increased for each one. + exceeds this, it will be split into several messages. W1 search and alarm search commands. request: diff --git a/MAINTAINERS b/MAINTAINERS index a4fe5ee8903f..54b80d582411 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2188,6 +2188,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git S: Supported F: drivers/char/* F: drivers/misc/* +F: include/linux/miscdevice.h CHECKPATCH M: Andy Whitcroft <apw@canonical.com> diff --git a/drivers/Makefile b/drivers/Makefile index 1a1790e4de6a..f98b50d8251d 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -83,7 +83,6 @@ obj-$(CONFIG_PCCARD) += pcmcia/ obj-$(CONFIG_DIO) += dio/ obj-$(CONFIG_SBUS) += sbus/ obj-$(CONFIG_ZORRO) += zorro/ -obj-$(CONFIG_MAC) += macintosh/ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ obj-$(CONFIG_PARIDE) += block/paride/ obj-$(CONFIG_TC) += tc/ @@ -141,7 +140,6 @@ obj-y += clk/ obj-$(CONFIG_MAILBOX) += mailbox/ obj-$(CONFIG_HWSPINLOCK) += hwspinlock/ -obj-$(CONFIG_NFC) += nfc/ obj-$(CONFIG_IOMMU_SUPPORT) += iommu/ obj-$(CONFIG_REMOTEPROC) += remoteproc/ obj-$(CONFIG_RPMSG) += rpmsg/ diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index 974321a2508d..14790304b84b 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -345,7 +345,6 @@ out: free_irq(apbs[i].irq, &dummy); iounmap(apbs[i].RamIO); } - pci_disable_device(dev); return ret; } diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index b14f1d36f897..f612d68629dc 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -43,6 +43,8 @@ static struct cn_dev cdev; static int cn_already_initialized; /* + * Sends mult (multiple) cn_msg at a time. + * * msg->seq and msg->ack are used to determine message genealogy. * When someone sends message it puts there locally unique sequence * and random acknowledge numbers. Sequence number may be copied into @@ -62,10 +64,13 @@ static int cn_already_initialized; * the acknowledgement number in the original message + 1, then it is * a new message. * + * If msg->len != len, then additional cn_msg messages are expected following + * the first msg. + * * The message is sent to, the portid if given, the group if given, both if * both, or if both are zero then the group is looked up and sent there. */ -int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, +int cn_netlink_send_mult(struct cn_msg *msg, u16 len, u32 portid, u32 __group, gfp_t gfp_mask) { struct cn_callback_entry *__cbq; @@ -98,7 +103,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, if (!portid && !netlink_has_listeners(dev->nls, group)) return -ESRCH; - size = sizeof(*msg) + msg->len; + size = sizeof(*msg) + len; skb = nlmsg_new(size, gfp_mask); if (!skb) @@ -121,6 +126,14 @@ int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, gfp_mask); return netlink_unicast(dev->nls, skb, portid, !(gfp_mask&__GFP_WAIT)); } +EXPORT_SYMBOL_GPL(cn_netlink_send_mult); + +/* same as cn_netlink_send_mult except msg->len is used for len */ +int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, + gfp_t gfp_mask) +{ + return cn_netlink_send_mult(msg, msg->len, portid, __group, gfp_mask); +} EXPORT_SYMBOL_GPL(cn_netlink_send); /* diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index be56e8ac95e6..aebde489c291 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -28,13 +28,13 @@ config EXTCON_ADC_JACK Say Y here to enable extcon device driver based on ADC values. config EXTCON_MAX14577 - tristate "MAX14577 EXTCON Support" + tristate "MAX14577/77836 EXTCON Support" depends on MFD_MAX14577 select IRQ_DOMAIN select REGMAP_I2C help If you say yes here you get support for the MUIC device of - Maxim MAX14577 PMIC. The MAX14577 MUIC is a USB port accessory + Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory detector and switch. config EXTCON_MAX77693 diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index e23f1c2e5053..e18f95be3733 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -39,7 +39,7 @@ * @chan: iio channel being queried. */ struct adc_jack_data { - struct extcon_dev edev; + struct extcon_dev *edev; const char **cable_names; int num_cables; @@ -64,7 +64,7 @@ static void adc_jack_handler(struct work_struct *work) ret = iio_read_channel_raw(data->chan, &adc_val); if (ret < 0) { - dev_err(&data->edev.dev, "read channel() error: %d\n", ret); + dev_err(&data->edev->dev, "read channel() error: %d\n", ret); return; } @@ -80,7 +80,7 @@ static void adc_jack_handler(struct work_struct *work) } /* if no def has met, it means state = 0 (no cables attached) */ - extcon_set_state(&data->edev, state); + extcon_set_state(data->edev, state); } static irqreturn_t adc_jack_irq_thread(int irq, void *_data) @@ -102,33 +102,33 @@ static int adc_jack_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - data->edev.name = pdata->name; - if (!pdata->cable_names) { - err = -EINVAL; dev_err(&pdev->dev, "error: cable_names not defined.\n"); - goto out; + return -EINVAL; } - data->edev.dev.parent = &pdev->dev; - data->edev.supported_cable = pdata->cable_names; + data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names); + if (IS_ERR(data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + data->edev->dev.parent = &pdev->dev; + data->edev->name = pdata->name; /* Check the length of array and set num_cables */ - for (i = 0; data->edev.supported_cable[i]; i++) + for (i = 0; data->edev->supported_cable[i]; i++) ; if (i == 0 || i > SUPPORTED_CABLE_MAX) { - err = -EINVAL; dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n", i - 1); - goto out; + return -EINVAL; } data->num_cables = i; if (!pdata->adc_conditions || !pdata->adc_conditions[0].state) { - err = -EINVAL; dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); - goto out; + return -EINVAL; } data->adc_conditions = pdata->adc_conditions; @@ -138,10 +138,8 @@ static int adc_jack_probe(struct platform_device *pdev) data->num_conditions = i; data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel); - if (IS_ERR(data->chan)) { - err = PTR_ERR(data->chan); - goto out; - } + if (IS_ERR(data->chan)) + return PTR_ERR(data->chan); data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); @@ -149,15 +147,14 @@ static int adc_jack_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - err = extcon_dev_register(&data->edev); + err = devm_extcon_dev_register(&pdev->dev, data->edev); if (err) - goto out; + return err; data->irq = platform_get_irq(pdev, 0); if (!data->irq) { dev_err(&pdev->dev, "platform_get_irq failed\n"); - err = -ENODEV; - goto err_irq; + return -ENODEV; } err = request_any_context_irq(data->irq, adc_jack_irq_thread, @@ -165,15 +162,10 @@ static int adc_jack_probe(struct platform_device *pdev) if (err < 0) { dev_err(&pdev->dev, "error: irq %d\n", data->irq); - goto err_irq; + return err; } return 0; - -err_irq: - extcon_dev_unregister(&data->edev); -out: - return err; } static int adc_jack_remove(struct platform_device *pdev) @@ -182,7 +174,6 @@ static int adc_jack_remove(struct platform_device *pdev) free_irq(data->irq, data); cancel_work_sync(&data->handler.work); - extcon_dev_unregister(&data->edev); return 0; } diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 98a14f6143a7..6c84e3d12043 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -91,7 +91,7 @@ struct arizona_extcon_info { int hpdet_ip; - struct extcon_dev edev; + struct extcon_dev *edev; }; static const struct arizona_micd_config micd_default_modes[] = { @@ -546,7 +546,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -581,7 +581,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) else report = ARIZONA_CABLE_HEADPHONE; - ret = extcon_set_cable_state_(&info->edev, report, true); + ret = extcon_set_cable_state_(info->edev, report, true); if (ret != 0) dev_err(arizona->dev, "Failed to report HP/line: %d\n", ret); @@ -664,7 +664,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_HEADPHONE, 1 << ARIZONA_CABLE_HEADPHONE); if (ret != 0) @@ -723,7 +723,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_HEADPHONE, 1 << ARIZONA_CABLE_HEADPHONE); if (ret != 0) @@ -764,7 +764,7 @@ static void arizona_micd_detect(struct work_struct *work) mutex_lock(&info->lock); /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -812,7 +812,7 @@ static void arizona_micd_detect(struct work_struct *work) if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { arizona_identify_headphone(info); - ret = extcon_update_state(&info->edev, + ret = extcon_update_state(info->edev, 1 << ARIZONA_CABLE_MICROPHONE, 1 << ARIZONA_CABLE_MICROPHONE); @@ -999,7 +999,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (info->last_jackdet == present) { dev_dbg(arizona->dev, "Detected jack\n"); - ret = extcon_set_cable_state_(&info->edev, + ret = extcon_set_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL, true); if (ret != 0) @@ -1038,7 +1038,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) info->micd_ranges[i].key, 0); input_sync(info->input); - ret = extcon_update_state(&info->edev, 0xffffffff, 0); + ret = extcon_update_state(info->edev, 0xffffffff, 0); if (ret != 0) dev_err(arizona->dev, "Removal report failed: %d\n", ret); @@ -1105,15 +1105,14 @@ static int arizona_extcon_probe(struct platform_device *pdev) info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "Failed to allocate memory\n"); - ret = -ENOMEM; - goto err; + return -ENOMEM; } info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); if (IS_ERR(info->micvdd)) { ret = PTR_ERR(info->micvdd); dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); - goto err; + return ret; } mutex_init(&info->lock); @@ -1151,15 +1150,19 @@ static int arizona_extcon_probe(struct platform_device *pdev) break; } - info->edev.name = "Headset Jack"; - info->edev.dev.parent = arizona->dev; - info->edev.supported_cable = arizona_cable; + info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + info->edev->name = "Headset Jack"; + info->edev->dev.parent = arizona->dev; - ret = extcon_dev_register(&info->edev); + ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret < 0) { dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", ret); - goto err; + return ret; } info->input = devm_input_allocate_device(&pdev->dev); @@ -1410,8 +1413,6 @@ err_rise: err_input: err_register: pm_runtime_disable(&pdev->dev); - extcon_dev_unregister(&info->edev); -err: return ret; } @@ -1445,7 +1446,6 @@ static int arizona_extcon_remove(struct platform_device *pdev) regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, 0); arizona_clk32k_disable(arizona); - extcon_dev_unregister(&info->edev); return 0; } diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 7ab21aa6eaa1..18d42c0e4581 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -565,6 +565,100 @@ static void dummy_sysfs_dev_release(struct device *dev) { } +/* + * extcon_dev_allocate() - Allocate the memory of extcon device. + * @supported_cable: Array of supported cable names ending with NULL. + * If supported_cable is NULL, cable name related APIs + * are disabled. + * + * This function allocates the memory for extcon device without allocating + * memory in each extcon provider driver and initialize default setting for + * extcon device. + * + * Return the p |