diff options
70 files changed, 1685 insertions, 600 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index afc04589eadf..27f2bc15298a 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -36,6 +36,8 @@ Optional properties: - read-only: this parameterless property disables writes to the eeprom + - size: total eeprom size in bytes + Example: eeprom@52 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index bd6480b19535..e7106bfc1f13 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -7,7 +7,9 @@ Required Properties: - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB - clock + clock in the second cell +- resets : phandle to reset controller with the reset number in + the second cell - interrupts : interrupt number - interrupt-parent : interrupt controller for bus, should reference a aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic @@ -40,7 +42,8 @@ i2c { #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 5b123e0e4cc2..64e6e656c345 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -6,6 +6,18 @@ davinci/keystone i2c interface contains. Required properties: - compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt index 4f8ec947c6bd..38a05562d1d2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt @@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver Required properties: - compatible = "i2c-gpio"; - - gpios: sda and scl gpio - + - sda-gpios: gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + - scl-gpios: gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. Optional properties: - - i2c-gpio,sda-open-drain: sda as open drain - - i2c-gpio,scl-open-drain: scl as open drain - i2c-gpio,scl-output-only: scl as output only - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - i2c-gpio,timeout-ms: timeout to get data +Deprecated properties, do not use in new device tree sources: + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios + - i2c-gpio,sda-open-drain: this means that something outside of our + control has put the GPIO line used for SDA into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + - i2c-gpio,scl-open-drain: this means that something outside of our + control has put the GPIO line used for SCL into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + Example nodes: +#include <dt-bindings/gpio/gpio.h> + i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; + sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt index 212e6779dc5c..b38f58a1c878 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt @@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus. Optional properties: - #address-cells = <1>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - #size-cells = <0>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - i2c-mux For i2c multiplexers/switches that have child nodes that are a mixture diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cad39aee9f73..a777477e4547 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -13,6 +13,7 @@ Required properties: "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa2..11263982470e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 000000000000..4b2195571a49 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt @@ -0,0 +1,66 @@ +Binding for sbs-manager + +Required properties: +- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. + +From OS view the device is basically an i2c-mux used to communicate with up to +four smart battery devices at address 0xb. The driver actually implements this +behaviour. So standard i2c-mux nodes can be used to register up to four slave +batteries. Channels will be numerated starting from 1 to 4. + +Example: + +batman@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index bb8eba5e9e4f..a76f02f64469 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2249,7 +2249,7 @@ F: include/linux/dmaengine.h F: include/linux/async_tx.h AT24 EEPROM DRIVER -M: Wolfram Sang <wsa@the-dreams.de> +M: Bartosz Golaszewski <brgl@bgdev.pl> L: linux-i2c@vger.kernel.org S: Maintained F: drivers/misc/eeprom/at24.c diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f53c61813998..e70feec6fad5 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,7 +31,7 @@ #include <linux/amba/serial.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> -#include <linux/i2c-gpio.h> +#include <linux/gpio/machine.h> #include <linux/spi/spi.h> #include <linux/export.h> #include <linux/irqchip/arm-vic.h> @@ -320,42 +320,47 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /************************************************************************* * EP93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data ep93xx_i2c_data; + +/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ +static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { + .dev_id = "i2c-gpio", + .table = { + /* Use local offsets on gpiochip/port "G" */ + GPIO_LOOKUP_IDX("G", 1, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + GPIO_LOOKUP_IDX("G", 0, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + }, +}; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", .id = 0, .dev = { - .platform_data = &ep93xx_i2c_data, + .platform_data = NULL, }, }; /** * ep93xx_register_i2c - Register the i2c platform device. - * @data: platform specific i2c-gpio configuration (__initdata) * @devices: platform specific i2c bus device information (__initdata) * @num: the number of devices on the i2c bus */ -void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) { /* - * Set the EEPROM interface pin drive type control. - * Defines the driver type for the EECLK and EEDAT pins as either - * open drain, which will require an external pull-up, or a normal - * CMOS driver. + * FIXME: this just sets the two pins as non-opendrain, as no + * platforms tries to do that anyway. Flag the applicable lines + * as open drain in the GPIO_LOOKUP above and the driver or + * gpiolib will handle open drain/open drain emulation as need + * be. Right now i2c-gpio emulates open drain which is not + * optimal. */ - if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) - pr_warning("sda != EEDAT, open drain has no effect\n"); - if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) - pr_warning("scl != EECLK, open drain has no effect\n"); - - __raw_writel((data->sda_is_open_drain << 1) | - (data->scl_is_open_drain << 0), + __raw_writel((0 << 1) | (0 << 0), EP93XX_GPIO_EEDRIVE); - ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); + gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 7a7f280b07d7..8e89ec8b6f0f 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c-gpio.h> #include <linux/spi/spi.h> #include <sound/cs4271.h> @@ -61,14 +60,6 @@ static struct ep93xx_eth_data __initdata edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, /* default to 100 kHz */ - .timeout = 0, /* default to 100 ms */ -}; static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { @@ -86,13 +77,11 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xxa_i2c_board_info, + ep93xx_register_i2c(edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9302() || machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data, - edb93xx_i2c_board_info, + ep93xx_register_i2c(edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 3bbe1591013e..6c41c794bed5 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -8,7 +8,6 @@ #include <linux/reboot.h> struct device; -struct i2c_gpio_platform_data; struct i2c_board_info; struct spi_board_info; struct platform_device; @@ -37,8 +36,7 @@ void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, - struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index c7a40f245892..e61f3dee24c2 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c-gpio.h> #include <linux/mmc/host.h> #include <linux/spi/spi.h> #include <linux/spi/mmc_spi.h> @@ -129,15 +128,6 @@ static struct ep93xx_spi_info simone_spi_info __initdata = { .use_dma = 1, }; -static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata simone_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), @@ -161,7 +151,7 @@ static void __init simone_init_machine(void) ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); - ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, + ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 8b29398f4dc7..45940c1d7787 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/i2c.h> -#include <linux/i2c-gpio.h> #include <linux/fb.h> #include <linux/mtd/partitions.h> @@ -127,15 +126,6 @@ static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 0, - .timeout = 0, -}; - static struct i2c_board_info __initdata snappercl15_i2c_data[] = { { /* Audio codec */ @@ -161,7 +151,7 @@ static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); ep93xx_register_eth(&snappercl15_eth_data, 1); - ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, + ep93xx_register_i2c(snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); snappercl15_register_audio(); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 1daf9441058c..5a0b6187990a 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/mtd/partitions.h> #include <linux/i2c.h> -#include <linux/i2c-gpio.h> #include <linux/platform_data/pca953x.h> #include <linux/spi/spi.h> |