diff options
118 files changed, 3491 insertions, 2365 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 7efed1ccddc9..683145d7b054 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3154,18 +3154,13 @@ force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. - pcie_hp= [PCIE] PCI Express Hotplug driver options: - nomsi Do not use MSI for PCI Express Native Hotplug (this - makes all PCIe ports use INTx for hotplug services). - - pcie_ports= [PCIE] PCIe ports handling: - auto Ask the BIOS whether or not to use native PCIe services - associated with PCIe ports (PME, hot-plug, AER). Use - them only if that is allowed by the BIOS. - native Use native PCIe services associated with PCIe ports - unconditionally. - compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe - ports driver. + pcie_ports= [PCIE] PCIe port services handling: + native Use native PCIe services (PME, AER, DPC, PCIe hotplug) + even if the platform doesn't give the OS permission to + use them. This may cause conflicts if the platform + also tries to use these services. + compat Disable native PCIe services (PME, AER, DPC, PCIe + hotplug). pcie_port_pm= [PCIE] PCIe port power management handling: off Disable power management of all PCIe ports diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt new file mode 100644 index 000000000000..10bd35f9207f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt @@ -0,0 +1,33 @@ +Hisilicon Hip06 Low Pin Count device + Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + Hip06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not CPU addresses, and there is no 'ranges' property in + LPC device node. + +Required properties: +- compatible: value should be as follows: + (a) "hisilicon,hip06-lpc" + (b) "hisilicon,hip07-lpc" +- #address-cells: must be 2 which stick to the ISA/EISA binding doc. +- #size-cells: must be 1 which stick to the ISA/EISA binding doc. +- reg: base memory range where the LPC register set is mapped. + +Note: + The node name before '@' must be "isa" to represent the binding stick to the + ISA/EISA binding specification. + +Example: + +isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; +}; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt index c84bc027930b..760b4d740616 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -34,6 +34,7 @@ Required properties Optional properties: - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- vpcie-supply: The regulator in charge of PCIe port power. - phys: List of phandle and phy mode specifier, should be 0. - phy-names: Must be "phy". diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 3a6ce55dd310..20227a875ac8 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -78,7 +78,7 @@ Examples for MT7623: #reset-cells = <1>; }; - pcie: pcie-controller@1a140000 { + pcie: pcie@1a140000 { compatible = "mediatek,mt7623-pcie"; device_type = "pci"; reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ @@ -111,7 +111,6 @@ Examples for MT7623: 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -123,7 +122,6 @@ Examples for MT7623: }; pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -135,7 +133,6 @@ Examples for MT7623: }; pcie@2,0 { - device_type = "pci"; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -148,6 +145,7 @@ Examples for MT7623: }; Examples for MT2712: + pcie: pcie@11700000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; @@ -169,7 +167,6 @@ Examples for MT2712: ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; pcie0: pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -189,7 +186,6 @@ Examples for MT2712: }; pcie1: pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -210,6 +206,7 @@ Examples for MT2712: }; Examples for MT7622: + pcie: pcie@1a140000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; @@ -243,7 +240,6 @@ Examples for MT7622: ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; pcie0: pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -263,7 +259,6 @@ Examples for MT7622: }; pcie1: pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 3c9d321b3d3b..1fd703bd73e0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -189,6 +189,10 @@ Value type: <phandle> Definition: A phandle to the analog power supply for IC which generates reference clock +- vddpe-3v3-supply: + Usage: optional + Value type: <phandle> + Definition: A phandle to the PCIe endpoint power supply - phys: Usage: required for apq8084 diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 76ba3a61d1a3..1fb614e615da 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,13 +1,15 @@ * Renesas R-Car PCIe interface Required properties: -compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; +compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; + "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "r |