diff options
44 files changed, 1832 insertions, 418 deletions
diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/bcm590xx.txt index 1fe30e2b10da..be51a15e05f9 100644 --- a/Documentation/devicetree/bindings/mfd/bcm590xx.txt +++ b/Documentation/devicetree/bindings/mfd/bcm590xx.txt @@ -19,7 +19,9 @@ Optional child nodes: The valid regulator node names for BCM59056 are: rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, - csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr, + gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6, + vbus Example: pmu: bcm59056@8 { diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 802e839b0829..d81ba30c0d8b 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -56,6 +56,20 @@ for a particular group of BUCKs. So provide same regulator-ramp-delay<value>. Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], BUCK[3, 4], and BUCK[7, 8, 10] +On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control +over GPIO. To turn this feature on this property must be added to the regulator +sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable); +Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + The regulator constraints inside the regulator nodes use the standard regulator bindings which are documented elsewhere. diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt new file mode 100644 index 000000000000..801053036146 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt @@ -0,0 +1,99 @@ +Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators + +Required properties: +- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3, ldo4): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from +0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between +0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1 +have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3 +regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 +regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V +and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not +be disabled and thus should have the regulator-always-on property set. + +Example: + + ltc3589: pmic@34 { + compatible = "lltc,ltc3589-1"; + reg = <0x34>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <591930>; + regulator-max-microvolt = <1224671>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456803>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1341250>; + regulator-max-microvolt = <2775000>; + lltc,fb-voltage-divider = <270000 100000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + bb_out_reg: bb-out { + regulator-min-microvolt = <3387341>; + regulator-max-microvolt = <3387341>; + lltc,fb-voltage-divider = <511000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1306329>; + regulator-max-microvolt = <1306329>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456806>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3200000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index 313a60ba61d8..340980239ea9 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -21,6 +21,10 @@ Optional properties: number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control and will not provide any enable/disable APIs. +- ti,overcurrent-wait: This is applicable to FET registers, which have a + poorly defined "overcurrent wait" field. If this property is present it + should be between 0 - 3. If this property isn't present we won't touch the + "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. Each regulator is defined using the standard binding for regulators. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 2ee6ead72434..941980474e14 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -74,6 +74,7 @@ lantiq Lantiq Semiconductor lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) +lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products microchip Microchip Technology Inc. diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 1c3ae57082ed..07e6e27be23c 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -508,19 +508,31 @@ int arizona_of_get_type(struct device *dev) } EXPORT_SYMBOL_GPL(arizona_of_get_type); +int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop, + bool mandatory) +{ + int gpio; + + gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0); + if (gpio < 0) { + if (mandatory) + dev_err(arizona->dev, + "Mandatory DT gpio %s missing/malformed: %d\n", + prop, gpio); + + gpio = 0; + } + + return gpio; +} +EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio); + static int arizona_of_get_core_pdata(struct arizona *arizona) { + struct arizona_pdata *pdata = &arizona->pdata; int ret, i; - arizona->pdata.reset = of_get_named_gpio(arizona->dev->of_node, - "wlf,reset", 0); - if (arizona->pdata.reset < 0) - arizona->pdata.reset = 0; - - arizona->pdata.ldoena = of_get_named_gpio(arizona->dev->of_node, - "wlf,ldoena", 0); - if (arizona->pdata.ldoena < 0) - arizona->pdata.ldoena = 0; + pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true); ret = of_property_read_u32_array(arizona->dev->of_node, "wlf,gpio-defaults", @@ -652,6 +664,9 @@ int arizona_dev_init(struct arizona *arizona) return -EINVAL; } + /* Mark DCVDD as external, LDO1 driver will clear if internal */ + arizona->external_dcvdd = true; + ret = mfd_add_devices(arizona->dev, -1, early_devs, ARRAY_SIZE(early_devs), NULL, 0, NULL); if (ret != 0) { @@ -851,14 +866,6 @@ int arizona_dev_init(struct arizona *arizona) arizona->pdata.gpio_defaults[i]); } - /* - * LDO1 can only be used to supply DCVDD so if it has no - * consumers then DCVDD is supplied externally. - */ - if (arizona->pdata.ldo1 && - arizona->pdata.ldo1->num_consumer_supplies == 0) - arizona->external_dcvdd = true; - pm_runtime_set_autosuspend_delay(arizona->dev, 100); pm_runtime_use_autosuspend(arizona->dev); pm_runtime_enable(arizona->dev); diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c index e9a33c79431b..43cba1a1973c 100644 --- a/drivers/mfd/bcm590xx.c +++ b/drivers/mfd/bcm590xx.c @@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = { }, }; -static const struct regmap_config bcm590xx_regmap_config = { +static const struct regmap_config bcm590xx_regmap_config_pri = { .reg_bits = 8, .val_bits = 8, - .max_register = BCM590XX_MAX_REGISTER, + .max_register = BCM590XX_MAX_REGISTER_PRI, .cache_type = REGCACHE_RBTREE, }; -static int bcm590xx_i2c_probe(struct i2c_client *i2c, +static const struct regmap_config bcm590xx_regmap_config_sec = { + .reg_bits = 8, + .val_bits = 8, + .max_register = BCM590XX_MAX_REGISTER_SEC, + .cache_type = REGCACHE_RBTREE, +}; + +static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri, const struct i2c_device_id *id) { struct bcm590xx *bcm590xx; int ret; - bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL); + bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL); if (!bcm590xx) return -ENOMEM; - i2c_set_clientdata(i2c, bcm590xx); - bcm590xx->dev = &i2c->dev; - bcm590xx->i2c_client = i2c; + i2c_set_clientdata(i2c_pri, bcm590xx); + bcm590xx->dev = &i2c_pri->dev; + bcm590xx->i2c_pri = i2c_pri; - bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config); - if (IS_ERR(bcm590xx->regmap)) { - ret = PTR_ERR(bcm590xx->regmap); - dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri, + &bcm590xx_regmap_config_pri); + if (IS_ERR(bcm590xx->regmap_pri)) { + ret = PTR_ERR(bcm590xx->regmap_pri); + dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret); return ret; } - ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs, + /* Secondary I2C slave address is the base address with A(2) asserted */ + bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter, + i2c_pri->addr | BIT(2)); + if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) { + dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n"); + return -ENODEV; + } + i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx); + + bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec, + &bcm590xx_regmap_config_sec); + if (IS_ERR(bcm590xx->regmap_sec)) { + ret = PTR_ERR(bcm590xx->regmap_sec); + dev_err(&bcm590xx->i2c_sec->dev, + "secondary regmap init failed: %d\n", ret); + goto err; + } + + ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs, ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL); - if (ret < 0) - dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret); + if (ret < 0) { + dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret); + goto err; + } + + return 0; +err: + i2c_unregister_device(bcm590xx->i2c_sec); return ret; } diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index ba1a25d758c1..1c3e6e2efe41 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -32,14 +32,6 @@ #define NUM_INT_REG 2 #define TOTAL_NUM_REG 0x18 -/* interrupt status registers */ -#define TPS65090_INT_STS 0x0 -#define TPS65090_INT_STS2 0x1 - -/* interrupt mask registers */ -#define TPS65090_INT_MSK 0x2 -#define TPS65090_INT_MSK2 0x3 - #define TPS65090_INT1_MASK_VAC_STATUS_CHANGE 1 #define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE 2 #define TPS65090_INT1_MASK_BAT_STATUS_CHANGE 3 @@ -64,11 +56,16 @@ static struct resource charger_resources[] = { } }; -static const struct mfd_cell tps65090s[] = { - { +enum tps65090_cells { + PMIC = 0, + CHARGER = 1, +}; + +static struct mfd_cell tps65090s[] = { + [PMIC] = { .name = "tps65090-pmic", }, - { + [CHARGER] = { .name = "tps65090-charger", .num_resources = ARRAY_SIZE(charger_resources), .resources = &charger_resources[0], @@ -139,17 +136,26 @@ static struct regmap_irq_chip tps65090_irq_chip = { .irqs = tps65090_irqs, .num_irqs = ARRAY_SIZE(tps65090_irqs), .num_regs = NUM_INT_REG, - .status_base = TPS65090_INT_STS, - .mask_base = TPS65090_INT_MSK, + .status_base = TPS65090_REG_INTR_STS, + .mask_base = TPS65090_REG_INTR_MASK, .mask_invert = true, }; static bool is_volatile_reg(struct device *dev, unsigned int reg) { - if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS2)) - return true; - else + /* Nearly all registers have status bits mixed in, except a few */ + switch (reg) { + case TPS65090_REG_INTR_MASK: + case TPS65090_REG_INTR_MASK2: + case TPS65090_REG_CG_CTRL0: + case TPS65090_REG_CG_CTRL1: + case TPS65090_REG_CG_CTRL2: + case TPS65090_REG_CG_CTRL3: + case TPS65090_REG_CG_CTRL4: + case TPS65090_REG_CG_CTRL5: return false; + } + return true; } static const struct regmap_config tps65090_regmap_config = { @@ -211,6 +217,9 @@ static int tps65090_i2c_probe(struct i2c_client *client, "IRQ init failed with err: %d\n", ret); return ret; } + } else { + /* Don't tell children they have an IRQ that'll never fire */ + tps65090s[CHARGER].num_resources = 0; } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index bbd54414a75d..835e5549ecdd 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -495,6 +495,10 @@ static void tps6586x_print_version(struct i2c_client *client, int version) case TPS658623: name = "TPS658623"; break; + case TPS658640: + case TPS658640v2: + name = "TPS658640"; + break; case TPS658643: name = "TPS658643"; break; diff --git a/drivers/power/tps65090-charger.c b/drivers/power/tps65090-charger.c index 8fc9d6df87f6..1685f63b9e5d 100644 --- a/drivers/power/tps65090-charger.c +++ b/drivers/power/tps65090-charger.c @@ -28,17 +28,6 @@ #include <linux/mfd/tps65090.h> -#define TPS65090_REG_INTR_STS 0x00 -#define TPS65090_REG_INTR_MASK 0x02 -#define TPS65090_REG_CG_CTRL0 0x04 -#define TPS65090_REG_CG_CTRL1 0x05 -#define TPS65090_REG_CG_CTRL2 0x06 -#define TPS65090_REG_CG_CTRL3 0x07 -#define TPS65090_REG_CG_CTRL4 0x08 -#define TPS65090_REG_CG_CTRL5 0x09 -#define TPS65090_REG_CG_STATUS1 0x0a -#define TPS65090_REG_CG_STATUS2 0x0b - #define TPS65090_CHARGER_ENABLE BIT(0) #define TPS65090_VACG BIT(1) #define TPS65090_NOITERM BIT(5) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f0cc9e6dac3a..789eb46090e3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,13 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + config REGULATOR_BCM590XX tristate "Broadcom BCM590xx PMU Regulators" depends on MFD_BCM590XX @@ -265,6 +272,14 @@ config REGULATOR_LP8788 help This driver supports LP8788 voltage regulator chip. +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + config REGULATOR_MAX14577 tristate "Maxim 14577/77836 regulator" depends on MFD_MAX14577 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12ef277a48b4..d461110f4463 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o @@ -37,6 +38,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o +obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 7c397bb81e01..4f730af70e7c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -300,7 +300,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) return 0; } -static struct of_device_id of_anatop_regulator_match_tbl[] = { +static const struct of_device_id of_anatop_regulator_match_tbl[] = { { .compatible = "fsl,anatop-regulator", }, { /* end */ } }; diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index b1033d30b504..04f262a836b2 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -16,9 +16,11 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -178,6 +180,42 @@ static const struct regulator_init_data arizona_ldo1_default = { .num_consumer_supplies = 1, }; +static int arizona_ldo1_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_ldo1 *ldo1 = config->driver_data; + struct device_node *init_node, *dcvdd_node; + struct regulator_init_data *init_data; + + pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true); + + init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1"); + dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0); + + if (init_node) { + config->of_node = init_node; + + init_data = of_get_regulator_init_data(arizona->dev, init_node); + + if (init_data) { + init_data->consumer_supplies = &ldo1->supply; + init_data->num_consumer_supplies = 1; + + if (dcvdd_node && dcvdd_node != init_node) + arizona->external_dcvdd = true; + + pdata->ldo1 = init_data; + } + } else if (dcvdd_node) { + arizona->external_dcvdd = true; + } + + of_node_put(dcvdd_node); + + return 0; +} + static int arizona_ldo1_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -186,6 +224,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) struct arizona_ldo1 *ldo1; int ret; + arizona->external_dcvdd = false; + ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); if (!ldo1) return -ENOMEM; @@ -216,6 +256,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev) config.dev = arizona->dev; config.driver_data = ldo1; config.regmap = arizona->regmap; + + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_ldo1_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + config.ena_gpio = arizona->pdata.ldoena; if (arizona->pdata.ldo1) @@ -223,6 +272,13 @@ static int arizona_ldo1_probe(struct platform_device *pdev) else config.init_data = &ldo1->init_data; + /* + * LDO1 can only be used to supply DCVDD so if it has no + * consumers then DCVDD is supplied externally. + */ + if (config.init_data->num_consumer_supplies == 0) + arizona->external_dcvdd = true; + ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(ldo1->regulator)) { ret = PTR_ERR(ldo1->regulator); @@ -231,6 +287,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, ldo1); return 0; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 6fdd9bf6927f..ce9aca5f8ee7 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -16,9 +16,11 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> #include <linux/gpio.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -195,6 +197,32 @@ static const struct regulator_init_data arizona_micsupp_ext_default = { .num_consumer_supplies = 1, }; +static int arizona_micsupp_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_micsupp *micsupp = config->driver_data; + struct device_node *np; + struct regulator_init_data *init_data; + + np = of_get_child_by_name(arizona->dev->of_node, "micvdd"); + + if (np) { + config->of_node = np; + + init_data = of_get_regulator_init_data(arizona->dev, np); + + if (init_data) { + init_data->consumer_supplies = &micsupp->supply; + init_data->num_consumer_supplies = 1; + + pdata->micvdd = init_data; + } + } + + return 0; +} + static int arizona_micsupp_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -234,6 +262,14 @@ static int arizona_micsupp_probe(struct platform_device *pdev) config.driver_data = micsupp; config.regmap = arizona->regmap; + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_micsupp_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + if (arizona->pdata.micvdd) config.init_data = arizona->pdata.micvdd; else @@ -253,6 +289,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, micsupp); return 0; diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c new file mode 100644 index 000000000000..004aadb7bcc1 --- /dev/null +++ b/drivers/regulator/axp20x-regulator.c @@ -0,0 +1,286 @@ +/* + * AXP20x regulators driver. + * + * Copyright (C) 2013 Carlo Caione <carlo@caione.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h>< |