diff options
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 77 | ||||
| -rw-r--r-- | include/dt-bindings/iio/qcom,spmi-vadc.h | 115 |
2 files changed, 172 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index 0fb46137f936..8498f11d06cd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -1,7 +1,9 @@ -Qualcomm's SPMI PMIC voltage ADC +Qualcomm's SPMI PMIC ADC -SPMI PMIC voltage ADC (VADC) provides interface to clients to read -voltage. The VADC is a 15-bit sigma-delta ADC. +- SPMI PMIC voltage ADC (VADC) provides interface to clients to read + voltage. The VADC is a 15-bit sigma-delta ADC. +- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + voltage. The VADC is a 16-bit sigma-delta ADC. VADC node: @@ -9,6 +11,8 @@ VADC node: Usage: required Value type: <string> Definition: Should contain "qcom,spmi-vadc". + Should contain "qcom,spmi-adc5" for PMIC5 ADC driver. + Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver. - reg: Usage: required @@ -45,13 +49,26 @@ Channel node properties: Definition: ADC channel number. See include/dt-bindings/iio/qcom,spmi-vadc.h +- label: + Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2" + Value type: <empty> + Definition: ADC input of the platform as seen in the schematics. + For thermistor inputs connected to generic AMUX or GPIO inputs + these can vary across platform for the same pins. Hence select + the platform schematics name for this channel. + - qcom,decimation: Usage: optional Value type: <u32> Definition: This parameter is used to decrease ADC sampling rate. Quicker measurements can be made by reducing decimation ratio. - Valid values are 512, 1024, 2048, 4096. - If property is not found, default value of 512 will be used. + - For compatible property "qcom,spmi-vadc", valid values are + 512, 1024, 2048, 4096. If property is not found, default value + of 512 will be used. + - For compatible property "qcom,spmi-adc5", valid values are 250, 420 + and 840. If property is not found, default value of 840 is used. + - For compatible property "qcom,spmi-adc-rev2", valid values are 256, + 512 and 1024. If property is not present, default value is 1024. - qcom,pre-scaling: Usage: optional @@ -66,21 +83,38 @@ Channel node properties: - qcom,ratiometric: Usage: optional Value type: <empty> - Definition: Channel calibration type. If this property is specified - VADC will use the VDD reference (1.8V) and GND for channel - calibration. If property is not found, channel will be - calibrated with 0.625V and 1.25V reference channels, also - known as absolute calibration. + Definition: Channel calibration type. + - For compatible property "qcom,spmi-vadc", if this property is + specified VADC will use the VDD reference (1.8V) and GND for + channel calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", + if this property is specified VADC will use the VDD reference + (1.875V) and GND for channel calibration. If property is not found, + channel will be calibrated with 0V and 1.25V reference channels, + also known as absolute calibration. - qcom,hw-settle-time: Usage: optional Value type: <u32> Definition: Time between AMUX getting configured and the ADC starting - conversion. Delay = 100us * (value) for value < 11, and - 2ms * (value - 10) otherwise. - Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, - 900 us and 1, 2, 4, 6, 8, 10 ms - If property is not found, channel will use 0us. + conversion. The 'hw_settle_time' is an index used from valid values + and programmed in hardware to achieve the hardware settling delay. + - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2", + Delay = 100us * (hw_settle_time) for hw_settle_time < 11, + and 2ms * (hw_settle_time - 10) otherwise. + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms. + If property is not found, channel will use 0us. + - For compatible property "qcom,spmi-adc5", delay = 15us for + value 0, 100us * (value) for values < 11, + and 2ms * (value - 10) otherwise. + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms + Certain controller digital versions have valid values of + 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms + If property is not found, channel will use 15us. - qcom,avg-samples: Usage: optional @@ -89,13 +123,18 @@ Channel node properties: Averaging provides the option to obtain a single measurement from the ADC that is an average of multiple samples. The value selected is 2^(value). - Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 - If property is not found, 1 sample will be used. + - For compatible property "qcom,spmi-vadc", valid values + are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 + If property is not found, 1 sample will be used. + - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", + valid values are: 1, 2, 4, 8, 16 + If property is not found, 1 sample will be used. NOTE: -Following channels, also known as reference point channels, are used for -result calibration and their channel configuration nodes should be defined: +For compatible property "qcom,spmi-vadc" following channels, also known as +reference point channels, are used for result calibration and their channel +configuration nodes should be defined: VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, VADC_GND_REF and VADC_VDD_VADC. diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h index 42121fa238fa..bf54b5adc065 100644 --- a/include/dt-bindings/iio/qcom,spmi-vadc.h +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2012-2014,2018 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -116,4 +116,117 @@ #define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID 0xf9 #define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM 0xfc +/* ADC channels for SPMI PMIC5 */ + +#define ADC5_REF_GND 0x00 +#define ADC5_1P25VREF 0x01 +#define ADC5_VREF_VADC 0x02 +#define ADC5_VREF_VADC5_DIV_3 0x82 +#define ADC5_VPH_PWR 0x83 +#define ADC5_VBAT_SNS 0x84 +#define ADC5_VCOIN 0x85 +#define ADC5_DIE_TEMP 0x06 +#define ADC5_USB_IN_I 0x07 +#define ADC5_USB_IN_V_16 0x08 +#define ADC5_CHG_TEMP 0x09 +#define ADC5_BAT_THERM 0x0a +#define ADC5_BAT_ID 0x0b +#define ADC5_XO_THERM 0x0c +#define ADC5_AMUX_THM1 0x0d +#define ADC5_AMUX_THM2 0x0e +#define ADC5_AMUX_THM3 0x0f +#define ADC5_AMUX_THM4 0x10 +#define ADC5_AMUX_THM5 0x11 +#define ADC5_GPIO1 0x12 +#define ADC5_GPIO2 0x13 +#define ADC5_GPIO3 0x14 +#define ADC5_GPIO4 0x15 +#define ADC5_GPIO5 0x16 +#define ADC5_GPIO6 0x17 +#define ADC5_GPIO7 0x18 +#define ADC5_SBUx 0x99 +#define ADC5_MID_CHG_DIV6 0x1e +#define ADC5_OFF 0xff + +/* 30k pull-up1 */ +#define ADC5_BAT_THERM_30K_PU 0x2a +#define ADC5_BAT_ID_30K_PU 0x2b +#define ADC5_XO_THERM_30K_PU 0x2c +#define ADC5_AMUX_THM1_30K_PU 0x2d +#define ADC5_AMUX_THM2_30K_PU 0x2e +#define ADC5_AMUX_THM3_30K_PU 0x2f +#define ADC5_AMUX_THM4_30K_PU 0x30 +#define ADC5_AMUX_THM5_30K_PU 0x31 +#define ADC5_GPIO1_30K_PU 0x32 +#define ADC5_GPIO2_30K_PU 0x33 +#define ADC5_GPIO3_30K_PU 0x34 +#define ADC5_GPIO4_30K_PU 0x35 +#define ADC5_GPIO5_30K_PU 0x36 +#define ADC5_GPIO6_30K_PU 0x37 +#define ADC5_GPIO7_30K_PU 0x38 +#define ADC5_SBUx_30K_PU 0x39 + +/* 100k pull-up2 */ +#define ADC5_BAT_THERM_100K_PU 0x4a +#define ADC5_BAT_ID_100K_PU 0x4b +#define ADC5_XO_THERM_100K_PU 0x4c +#define ADC5_AMUX_THM1_100K_PU 0x4d +#define ADC5_AMUX_THM2_100K_PU 0x4e +#define ADC5_AMUX_THM3_100K_PU 0x4f +#define ADC5_AMUX_THM4_100K_PU 0x50 +#define ADC5_AMUX_THM5_100K_PU 0x51 +#define ADC5_GPIO1_100K_PU 0x52 +#define ADC5_GPIO2_100K_PU 0x53 +#define ADC5_GPIO3_100K_PU 0x54 +#define ADC5_GPIO4_100K_PU 0x55 +#define ADC5_GPIO5_100K_PU 0x56 +#define ADC5_GPIO6_100K_PU 0x57 +#define ADC5_GPIO7_100K_PU 0x58 +#define ADC5_SBUx_100K_PU 0x59 + +/* 400k pull-up3 */ +#define ADC5_BAT_THERM_400K_PU 0x6a +#define ADC5_BAT_ID_400K_PU 0x6b +#define ADC5_XO_THERM_400K_PU 0x6c +#define ADC5_AMUX_THM1_400K_PU 0x6d +#define ADC5_AMUX_THM2_400K_PU 0x6e +#define ADC5_AMUX_THM3_400K_PU 0x6f +#define ADC5_AMUX_THM4_400K_PU 0x70 +#define ADC5_AMUX_THM5_400K_PU 0x71 +#define ADC5_GPIO1_400K_PU 0x72 +#define ADC5_GPIO2_400K_PU 0x73 +#define ADC5_GPIO3_400K_PU 0x74 +#define ADC5_GPIO4_400K_PU 0x75 +#define ADC5_GPIO5_400K_PU 0x76 +#define ADC5_GPIO6_400K_PU 0x77 +#define ADC5_GPIO7_400K_PU 0x78 +#define ADC5_SBUx_400K_PU 0x79 + +/* 1/3 Divider */ +#define ADC5_GPIO1_DIV3 0x92 +#define ADC5_GPIO2_DIV3 0x93 +#define ADC5_GPIO3_DIV3 0x94 +#define ADC5_GPIO4_DIV3 0x95 +#define ADC5_GPIO5_DIV3 0x96 +#define ADC5_GPIO6_DIV3 0x97 +#define ADC5_GPIO7_DIV3 0x98 +#define ADC5_SBUx_DIV3 0x99 + +/* Current and combined current/voltage channels */ +#define ADC5_INT_EXT_ISENSE 0xa1 +#define ADC5_PARALLEL_ISENSE 0xa5 +#define ADC5_CUR_REPLICA_VDS 0xa7 +#define ADC5_CUR_SENS_BATFET_VDS_OFFSET 0xa9 +#define ADC5_CUR_SENS_REPLICA_VDS_OFFSET 0xab +#define ADC5_EXT_SENS_OFFSET 0xad + +#define ADC5_INT_EXT_ISENSE_VBAT_VDATA 0xb0 +#define ADC5_INT_EXT_ISENSE_VBAT_IDATA 0xb1 +#define ADC5_EXT_ISENSE_VBAT_VDATA 0xb2 +#define ADC5_EXT_ISENSE_VBAT_IDATA 0xb3 +#define ADC5_PARALLEL_ISENSE_VBAT_VDATA 0xb4 +#define ADC5_PARALLEL_ISENSE_VBAT_IDATA 0xb5 + +#define ADC5_MAX_CHANNEL 0xc0 + #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */ |