diff options
57 files changed, 170 insertions, 145 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 7fab3298d745..8128b141b92b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -797,6 +797,7 @@ F: arch/arm/mach-gemini/ ARM/CSR SIRFPRIMA2 MACHINE SUPPORT M: Barry Song <baohua.song@csr.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git S: Maintained F: arch/arm/mach-prima2/ F: drivers/dma/sirf-dma.c @@ -1135,6 +1136,7 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-s5p*/ F: arch/arm/mach-exynos*/ +N: exynos ARM/SAMSUNG MOBILE MACHINE SUPPORT M: Kyungmin Park <kyungmin.park@samsung.com> diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1ba358ba16b8..7ea15176d109 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -168,7 +168,7 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell -machine-$(CONFIG_ARCH_PRIMA2) += prima2 +machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 550eb772c30e..52a1f5efc086 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -80,7 +80,7 @@ sata@a0000 { compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; + reg = <0xa0000 0x5000>; interrupts = <55>; clocks = <&gateclk 15>, <&gateclk 30>; clock-names = "0", "1"; @@ -96,7 +96,7 @@ ethernet@70000 { compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x2500>; + reg = <0x70000 0x4000>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; @@ -104,7 +104,7 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; - reg = <0x74000 0x2500>; + reg = <0x74000 0x4000>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f4029f015aff..2d9335da210c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -92,7 +92,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6ab56bd35de9..488ca5eb9a55 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -107,7 +107,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5b902f9a3af2..1ee8540b0eba 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -88,7 +88,7 @@ ethernet@30000 { compatible = "marvell,armada-370-neta"; - reg = <0x30000 0x2500>; + reg = <0x30000 0x4000>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 9bf49b3826ea..d347082d28f3 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -15,7 +15,7 @@ < 0x02081000 0x1000 >; }; - timer@2000004 { + timer@2000000 { compatible = "qcom,scss-timer", "qcom,msm-timer"; interrupts = <1 0 0x301>, <1 1 0x301>, @@ -26,7 +26,7 @@ cpu-offset = <0x40000>; }; - serial@19c400000 { + serial@19c40000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 2e4d87a125d6..7c9ef9b80c15 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - serial@19c400000 { + serial@16440000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 02802386b894..699b71e7f7ec 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -163,6 +163,7 @@ config MACH_SAMA5_DT bool "Atmel SAMA5 Evaluation Kits with device-tree support" depends on SOC_SAMA5 select USE_OF + select PHYLIB if NETDEVICES help Select this if you want to experiment device-tree with an Atmel Evaluation Kit. diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index d193a409bc45..9eb574397ee1 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -332,10 +332,6 @@ static void __init at91rm9200_initialize(void) { arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; - at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) - | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) - | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) - | (1 << AT91RM9200_ID_IRQ6); /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, @@ -388,6 +384,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, + .extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6), .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index a8ce24538da6..5de6074b4f4f 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -348,8 +348,6 @@ static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) - | (1 << AT91SAM9260_ID_IRQ2); /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); @@ -400,6 +398,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, + .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) + | (1 << AT91SAM9260_ID_IRQ2), .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 25efb5ac30f1..0e0793241ab7 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -290,8 +290,6 @@ static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) - | (1 << AT91SAM9261_ID_IRQ2); /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); @@ -342,6 +340,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, + .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) + | (1 << AT91SAM9261_ID_IRQ2), .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index f44ffd2105a7..6ce7d1850893 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -327,7 +327,6 @@ static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); @@ -378,6 +377,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, + .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 8b7fce067652..fda502691686 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -374,7 +374,6 @@ static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); @@ -425,6 +424,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, + .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index f77fae5591bc..d4ec0d9a9872 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -293,7 +293,6 @@ static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); @@ -344,6 +343,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, + .extern_irq = (1 << AT91SAM9RL_ID_IRQ0), .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 19ca79396905..bad94b84a46f 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -55,8 +55,6 @@ static void at91x40_idle(void) void __init at91x40_initialize(unsigned long main_clock) { arm_pm_idle = at91x40_idle; - at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) - | (1 << AT91X40_ID_IRQ2); } /* @@ -86,9 +84,10 @@ static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = { void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) { + u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) + | (1 << AT91X40_ID_IRQ2); if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority, at91_extern_irq); + at91_aic_init(priority, extern_irq); } - diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 705305e62bbc..ad95f6a23a28 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -62,7 +62,8 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy) static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm")) + if (of_machine_is_compatible("atmel,sama5d3xcm") && + IS_ENABLED(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index da841885d01c..6b2630a92f71 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12())) + || cpu_is_sama5d3())) #define cpu_has_upll() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -489,7 +489,7 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "UCKR = %8x\n", uckr); } seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); - if (cpu_has_upll()) + if (cpu_has_upll() || cpu_is_at91sam9n12()) seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr); @@ -614,6 +614,8 @@ static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) { if (pll == &pllb && (reg & AT91_PMC_USB96M)) return freq / 2; + else if (pll == &utmi_clk || cpu_is_at91sam9n12()) + return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8)); else return freq; } @@ -683,6 +685,8 @@ static struct clk *const standard_pmc_clocks[] __initconst = { /* PLLB generated USB full speed clock init */ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) { + unsigned int reg; + /* * USB clock init: choose 48 MHz PLLB value, * disable 48MHz clock during usb peripheral suspend. @@ -691,22 +695,35 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) */ uhpck.parent = &pllb; - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2); pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); if (cpu_is_at91rm9200()) { + reg = at91_pllb_usb_init |= AT91_PMC_USB96M; uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { + reg = at91_pllb_usb_init |= AT91_PMC_USB96M; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91sam9n12()) { + /* Divider for USB clock is in USB clock register for 9n12 */ + reg = AT91_PMC_USBS_PLLB; + + /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */ + reg |= AT91_PMC_OHCIUSBDIV_2; + at91_pmc_write(AT91_PMC_USB, reg); + + /* Still setup masks */ uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } at91_pmc_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); } /* UPLL generated USB full speed clock init */ @@ -725,8 +742,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = utmi_clk.rate_hz; - uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); + uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr); } static int __init at91_pmc_init(unsigned long main_clock) diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 69f9e3bbf4e5..4ec6a6d9b9be 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -51,7 +51,7 @@ static struct cpuidle_driver at91_idle_driver = { .states[1] = { .enter = at91_enter_idle, .exit_latency = 10, - .target_residency = 100000, + .target_residency = 10000, .flags = CPUIDLE_FLAG_TIME_VALID, .name = "RAM_SR", .desc = "WFI and DDR Self Refresh", diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 78ab06548658..f6de36aefe85 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -85,4 +85,4 @@ extern void __init at91_gpio_irq_setup(void); extern int __init at91_gpio_of_irq_setup(struct device_node *node, struct device_node *parent); -extern int at91_extern_irq; +extern u32 at91_get_extern_irq(void); diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 2bd7f51b0b82..c604cc69acb5 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -130,7 +130,10 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ #define AT91_PMC_USBS_PLLA (0 << 0) #define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ #define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ +#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) +#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) #define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ #define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index e0ca59171022..3d192c5aee66 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -232,7 +232,14 @@ static void __maybe_unused at91_aic5_eoi(struct irq_data *d) at91_aic_write(AT91_AIC5_EOICR, 0); } -unsigned long *at91_extern_irq; +static unsigned long *at91_extern_irq; + +u32 at91_get_extern_irq(void) +{ + if (!at91_extern_irq) + return 0; + return *at91_extern_irq; +} #define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 530db304ec5e..15afb5d9271f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -212,7 +212,7 @@ static int at91_pm_enter(suspend_state_t state) (at91_pmc_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (at91_extern_irq)) + | (at91_get_extern_irq())) & at91_aic_read(AT91_AIC_IMR), state); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e2f4bdd146d6..b17fbcf4d9e8 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -48,7 +48,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority, at91_extern_irq); + at91_aic_init(priority, at91_boot_soc.extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -80,7 +80,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) desc->pfn = __phys_to_pfn(base); desc->length = length; - desc->type = MT_DEVICE; + desc->type = MT_MEMORY_NONCACHED; pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 43a225f9e713..a1e1482c6da8 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -6,6 +6,7 @@ struct at91_init_soc { int builtin; + u32 extern_irq; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 739be7e738fe..513eee14f77d 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -151,7 +151,6 @@ static __init void davinci_sffsdr_init(void) } MACHINE_START(SFFSDR, "Lyrtech SFFSDR") - /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c index 4886404d42f5..b0fbdf1cbdd1 100644 --- a/arch/arm/mach-msm/clock-debug.c +++ b/arch/arm/mach-msm/clock-debug.c @@ -104,7 +104,7 @@ int __init clock_debug_add(struct clk *clock) if (!debugfs_base) return -ENOMEM; - strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1); + strlcpy(temp, clock->dbg_name, ARRAY_SIZE(temp)); for (ptr = temp; *ptr; ptr++) *ptr = tolower(*ptr); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4dc2fbba0ecd..3a66635e7d17 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -3,7 +3,6 @@ config SOC_IMX23 select ARM_AMBA select ARM_CPU_SUSPEND if PM se |