diff options
64 files changed, 94 insertions, 268 deletions
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 84fb6349a59a..2a9c3c3abe9b 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -15,10 +15,6 @@ menuconfig ARCNET COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset support" below. - You might also want to have a look at the Ethernet-HOWTO, available - from <http://www.tldp.org/docs.html#howto>(even though ARCnet - is not really Ethernet). - To compile this driver as a module, choose M here. The module will be called arcnet. diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index afaab4b2333f..5b7658bcf020 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_3COM default y depends on ISA || EISA || PCI || PCMCIA ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all @@ -23,8 +21,7 @@ config EL3 depends on (ISA || EISA) ---help--- If you have a network (Ethernet) card belonging to the 3Com - EtherLinkIII series, say Y and read the Ethernet-HOWTO, available - from <http://www.tldp.org/docs.html#howto>. + EtherLinkIII series, say Y here. If your card is not working you may need to use the DOS setup disk to disable Plug & Play mode, and to select the default @@ -38,8 +35,7 @@ config 3C515 depends on ISA && ISA_DMA_API ---help--- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet - network card, say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + network card, say Y here. To compile this driver as a module, choose M here. The module will be called 3c515. @@ -78,9 +74,7 @@ config VORTEX "Tornado" (3c905) PCI "Hurricane" (3c555/3cSOHO) PCI - If you have such a card, say Y and read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. More - specific information is in + If you have such a card, say Y here. More specific information is in <file:Documentation/networking/vortex.txt> and in the comments at the beginning of <file:drivers/net/ethernet/3com/3c59x.c>. @@ -97,9 +91,7 @@ config TYPHOON 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module will be called typhoon. diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 2d89bd00de61..edf72258ab1d 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_8390 default y depends on NET_VENDOR_NATSEMI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all @@ -71,9 +69,7 @@ config MAC8390 select CRC32 ---help--- If you want to include a driver to support Nubus or LC-PDS - Ethernet cards using an NS8390 chipset or its equivalent, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + Ethernet cards using an NS8390 chipset or its equivalent, say Y. config MCF8390 tristate "ColdFire NS8390 based Ethernet support" @@ -95,10 +91,9 @@ config NE2000 ATARI_ETHERNEC) select CRC32 ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Many Ethernet cards - without a specific driver are compatible with NE2000. + If you have a network (Ethernet) card of this type, say Y here. + Many Ethernet cards without a specific driver are compatible with + the NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI NE2000 and clone support" below. @@ -114,8 +109,7 @@ config NE2K_PCI This driver is for NE2000 compatible PCI cards. It will not work with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 support" below). If you have a PCI NE2000 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + say Y here. This driver also works for the following NE2000 clone cards: RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 @@ -164,9 +158,7 @@ config ULTRA depends on ISA select CRC32 ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card of this type, say Y here. Important: There have been many reports that, with some motherboards mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, @@ -183,9 +175,7 @@ config WD80x3 depends on ISA select CRC32 ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module will be called wd. diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig index 5c804bbe3dab..822cffb4174c 100644 --- a/drivers/net/ethernet/adaptec/Kconfig +++ b/drivers/net/ethernet/adaptec/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_ADAPTEC default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig index c9cd3592ab73..6b94ba610399 100644 --- a/drivers/net/ethernet/adi/Kconfig +++ b/drivers/net/ethernet/adi/Kconfig @@ -7,8 +7,6 @@ config NET_BFIN depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537 ---help--- If you have a network (Ethernet) card belonging to this class, say Y. - Make sure you know the name of your card. Read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. If unsure, say Y. diff --git a/drivers/net/ethernet/agere/Kconfig b/drivers/net/ethernet/agere/Kconfig index 63e805de619e..b6fe9200355a 100644 --- a/drivers/net/ethernet/agere/Kconfig +++ b/drivers/net/ethernet/agere/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_AGERE default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index d8d95d4cd45a..47da7e7a5b6a 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -9,8 +9,7 @@ config NET_VENDOR_ALLWINNER depends on ARCH_SUNXI ---help--- If you have a network (Ethernet) card belonging to this - class, say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + class, say Y here. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig index 799a85282070..e06ccab354b5 100644 --- a/drivers/net/ethernet/alteon/Kconfig +++ b/drivers/net/ethernet/alteon/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_ALTEON default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index acd53173fcc0..afc62ea804fc 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -37,8 +37,7 @@ config AMD8111_ETH select MII ---help--- If you have an AMD 8111-based PCI LANCE ethernet card, - answer Y here and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + answer Y here. To compile this driver as a module, choose M here. The module will be called amd8111e. @@ -47,10 +46,8 @@ config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" depends on ISA && ISA_DMA_API && !ARM ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are - of this type. + If you have a network (Ethernet) card of this type, say Y here. + Some LinkSys cards are of this type. To compile this driver as a module, choose M here: the module will be called lance. This is recommended. @@ -62,8 +59,7 @@ config PCNET32 select MII ---help--- If you have a PCnet32 or PCnetPCI based network (Ethernet) card, - answer Y here and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + answer Y here. To compile this driver as a module, choose M here. The module will be called pcnet32. @@ -144,9 +140,7 @@ config NI65 tristate "NI6510 support" depends on ISA && ISA_DMA_API && !ARM ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module will be called ni65. diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig index 1375e2dc9468..d19a41b0c6d2 100644 --- a/drivers/net/ethernet/apple/Kconfig +++ b/drivers/net/ethernet/apple/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_APPLE default y depends on (PPC_PMAC && PPC32) || MAC ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all @@ -59,7 +57,6 @@ config MACMACE ---help--- Support for the onboard AMD 79C940 MACE Ethernet controller used in the 660AV and 840AV Macintosh. If you have one of these Macintoshes - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + say Y here. endif # NET_VENDOR_APPLE diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig index dea29ee24da4..52a6b16f57d2 100644 --- a/drivers/net/ethernet/arc/Kconfig +++ b/drivers/net/ethernet/arc/Kconfig @@ -6,9 +6,7 @@ config NET_VENDOR_ARC bool "ARC devices" default y ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index 58ad37c733bc..e05b25675333 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_ATHEROS default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index a6f9142b9048..8be9eab73320 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -26,8 +26,7 @@ config B44 select PHYLIB ---help--- If you have a network (Ethernet) controller of this type, say Y - or M and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + or M here. To compile this driver as a module, choose M here. The module will be called b44. diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig index 4e8c0b6c57d0..c4bbe54e2cad 100644 --- a/drivers/net/ethernet/brocade/Kconfig +++ b/drivers/net/ethernet/brocade/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_BROCADE default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 1ba3e3a67389..f0bcb15d3fec 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -8,8 +8,6 @@ config NET_CADENCE default y ---help--- If you have a network (Ethernet) card belonging to this class, say Y. - Make sure you know the name of your card. Read the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. If unsure, say Y. diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 7daa088a9bb7..a79813a17b6e 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_CHELSIO default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 905ac5f5d9a6..5ab912937aff 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_CIRRUS default y depends on ISA || EISA || ARM || MAC ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all @@ -23,9 +21,7 @@ config CS89x0 depends on ISA || EISA || ARM ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a - network (Ethernet) card of this type, say Y and read the - Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto> as well as + network (Ethernet) card of this type, say Y and read the file <file:Documentation/networking/cs89x0.txt>. To compile this driver as a module, choose M here. The module @@ -55,9 +51,7 @@ config MAC89x0 depends on MAC ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a - Nubus or LC-PDS network (Ethernet) card of this type, say Y and - read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + Nubus or LC-PDS network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. This module will be called mac89x0. diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig index 1c7b884e3371..15b713a89620 100644 --- a/drivers/net/ethernet/cisco/Kconfig +++ b/drivers/net/ethernet/cisco/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_CISCO default y depends on PCI ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig index 68262aa57d01..740bbad5ed38 100644 --- a/drivers/net/ethernet/dec/Kconfig +++ b/drivers/net/ethernet/dec/Kconfig @@ -7,9 +7,7 @@ config NET_VENDOR_DEC default y depends on PCI || EISA || CARDBUS ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig index eb9ba6e97d04..1003201b5d80 100644 --- a/drivers/net/ethernet/dec/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -21,8 +21,7 @@ config DE2104X of this type. (If your card is NOT SMC EtherPower 10/100 PCI (smc9332dst), you can also try the driver for "Generic DECchip" cards, below. However, most people with a network card of this type - will say Y here.) Do read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + will say Y here.) To compile this driver as a module, choose M here. The module will be called de2104x. @@ -50,8 +49,7 @@ config TULIP of this type. (If your card is NOT SMC EtherPower 10/100 PCI (smc9332dst), you can also try the driver for "Generic DECchip" cards, above. However, most people with a network card of this type - will say Y here.) Do read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + will say Y here.) To compile this driver as a module, choose M here. The module will be called tulip. @@ -113,9 +111,7 @@ config DE4X5 ---help--- This is support for the DIGITAL series of PCI/EISA Ethernet cards. These include the DE425, DE434, DE435, DE450 and DE500 models. If - |